lots o' parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MJN** · 07-23-2002, 10:16 PM

Time to start saving for school, lots of stuff to go.

Tilt column w/key $65, '80 GMC cab and clip harness $45, '74 Chev cab harness $40, '80 headliner molding with hardware $40, 400 sb in pieces $100, several guage bezels $10 ea, pedal assemblies (1 stick, 2 auto) $35 ea, '80 GMC rad support $30, air cleaner bases $10, gauge clusters $25, tilt column for parts (auto) $20, two dash pads (cracked) $5 ea, '74 C/20 brake rotors ( nice, no grooves) $50, some misc.

won't ship rad support or engine unless you need it that bad.
all other prices + shipping

79BIG10 · 07-24-2002, 01:53 AM

I was wondering if you still had those panels for me or was it someone else

Also what kind of bezels you have?

**MJN** · 07-24-2002, 11:56 AM

I have those panels sitting here but my dad never took them in to check the shipping. Do you want both pair or just the saddle ones? The bezels I have are for non-A/C trucks, one is woodgrain, another is silver, another is plain but has a corner screw hole missing, and the other is for A/C but has the radio hole cut out. I'll get those panels out this week, I need you complete shipping address to get them out. thanks

79BIG10 · 07-25-2002, 01:18 AM

I'm looking for the silver ac one. You got a pic of it? I need to compare to mine. 79 is different from most models. Yes saddle ones only. I haven't heard back from my brother. How much for them? I get paid next week and pay you then. Let me know on shipping for 75098. Email me the info on total for them at CJHICKS1@MSN.com Thanks!!

**MJN** · 07-25-2002, 03:21 PM

The silver A/C bezel is from an '80 Gmc Sierra Classic from Texas. Someone cut a hole for a CD player in it so the radio holes are gone. Let me know if you still need it.

79BIG10 · 07-26-2002, 03:08 AM

If you can email or post a picture of it I could see for sure if it would work. I haev a cd player in mine now but need to look at bezel for fit (roughly) and also the cut out for the wiper controls.

**MJN** · 07-26-2002, 08:19 AM

I don't have a camera to get a picture but I could measure the hole, not like it couldn't be made bigger though. The wiper switch is still in tact on this one. Sorry about the picture.

79BIG10 · 07-26-2002, 04:09 PM

No problem about the picture. Do me a favor and look at my website and look at where my wiper controls are under the interior section. 79 and 80 are the odd balls. If the bezel look like mine in the cut out then I can probably use it. Also hows the rest of the bezel look as in cracks, etc?

perrosinpata@aol.com · 07-26-2002, 07:01 PM

lower control arms. are they 73?

**MJN** · 07-26-2002, 11:45 PM

No Lower control arms at my place. Maybe you need Livrat's stuff.

07-23-2002, 10:16 PM	#1
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	lots o' parts for sale Time to start saving for school, lots of stuff to go. Tilt column w/key $65, '80 GMC cab and clip harness $45, '74 Chev cab harness $40, '80 headliner molding with hardware $40, 400 sb in pieces $100, several guage bezels $10 ea, pedal assemblies (1 stick, 2 auto) $35 ea, '80 GMC rad support $30, air cleaner bases $10, gauge clusters $25, tilt column for parts (auto) $20, two dash pads (cracked) $5 ea, '74 C/20 brake rotors ( nice, no grooves) $50, some misc. won't ship rad support or engine unless you need it that bad. all other prices + shipping

07-24-2002, 01:53 AM	#2
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	I was wondering if you still had those panels for me or was it someone else Also what kind of bezels you have? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

07-25-2002, 01:18 AM	#4
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	I'm looking for the silver ac one. You got a pic of it? I need to compare to mine. 79 is different from most models. Yes saddle ones only. I haven't heard back from my brother. How much for them? I get paid next week and pay you then. Let me know on shipping for 75098. Email me the info on total for them at CJHICKS1@MSN.com Thanks!! __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

07-26-2002, 03:08 AM	#6
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	If you can email or post a picture of it I could see for sure if it would work. I haev a cd player in mine now but need to look at bezel for fit (roughly) and also the cut out for the wiper controls. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

07-26-2002, 04:09 PM	#8
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	No problem about the picture. Do me a favor and look at my website and look at where my wiper controls are under the interior section. 79 and 80 are the odd balls. If the bezel look like mine in the cut out then I can probably use it. Also hows the rest of the bezel look as in cracks, etc? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

07-24-2002, 11:56 AM	#3
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	I have those panels sitting here but my dad never took them in to check the shipping. Do you want both pair or just the saddle ones? The bezels I have are for non-A/C trucks, one is woodgrain, another is silver, another is plain but has a corner screw hole missing, and the other is for A/C but has the radio hole cut out. I'll get those panels out this week, I need you complete shipping address to get them out. thanks

07-25-2002, 03:21 PM	#5
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	The silver A/C bezel is from an '80 Gmc Sierra Classic from Texas. Someone cut a hole for a CD player in it so the radio holes are gone. Let me know if you still need it.

07-26-2002, 08:19 AM	#7
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	I don't have a camera to get a picture but I could measure the hole, not like it couldn't be made bigger though. The wiper switch is still in tact on this one. Sorry about the picture.

07-26-2002, 07:01 PM	#9
perrosinpata@aol.com Registered User Join Date: Jan 2002 Location: Arlington TN Posts: 327	control arms lower control arms. are they 73?

07-26-2002, 11:45 PM	#10
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	No Lower control arms at my place. Maybe you need Livrat's stuff.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.