|
|
|
03-25-2006, 02:14 PM
|
#1 |
|
Registered User
Join Date: Oct 2005
Location: NJ
Posts: 2
|
New guy w/ issues :)
Hey Ya'll,
Mike from northern New Jersey here. Recently got a 1972 C30 Dually w/ a mason dump body. LOVE the truck, but it doesn't stop so well.  Passenger side rotor looks good...driver's side is pretty 'groovy'. The grooves are so uniform they almost look intentional. Anyways... I would think more surface area the better for stopping power (under HEAVY load). The other side of the rotor is good. Anyone know where I could get a replacement rotor? As you can see from the pic, its not your typical aftermarket job. I've searched high and low. Any help is appreciated.A thousand thanks and thanks for listening! -Mike |
|
|
|
03-25-2006, 02:31 PM
|
#2 |
|
A little east of nowhere
Join Date: Feb 2006
Location: LaBroquerie,Manitoba Canada
Posts: 168
|
Re: New guy w/ issues :)
Oh ya, the grooves were intentional. That's from the rivits on the brake pads when they wear too far. Don't know if anyone still makes those. Check wreckers ,but make sure to measure the rotor thickness that it will be above the min. spec after machining. Good luck and welcome from the great white north.
|
|
|
|
|
03-25-2006, 02:46 PM
|
#3 |
|
Short, Fleet, Slammed, V8 Club
Join Date: Mar 2006
Location: Kingsport,TN
Posts: 450
|
Re: New guy w/ issues :)
If you can't get it from Autozone or Advance then I would try Chevy. I am sure that you have already tried this route though. So I would try a place here called Wheel and Brake. Not sure if you have anything like this up there.
|
|
|
|
|
03-25-2006, 05:42 PM
|
#4 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: New guy w/ issues :)
Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
03-25-2006, 07:55 PM
|
#5 |
|
Living In The Past
Join Date: Nov 2003
Location: Rockies
Posts: 709
|
Re: New guy w/ issues :)
You can check with this member to see if his rotors are within spec for turning http://67-72chevytrucks.com/vboard/s...d.php?t=188259
or as a last resort get some 3/4 ton rotors (yes they will work) and put these adapers on. http://www.southwestwheel.com/mywebs...4c_1323749.htm that would be expensive but like you said these rotors are hard to come by. I looked myself this last summer and never found any and went the adapter route since I had a good set of 3/4 rotors on hand, but it looks like they had a major price increase since I did it. Last edited by Olden Days; 03-25-2006 at 07:59 PM. |
|
|
|
|
03-25-2006, 08:33 PM
|
#6 |
|
Just here to help
 
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
Re: New guy w/ issues :)
Welcome to the board.post around on the forums i am sure someone will know where to get them.
|
|
|
|
|
03-26-2006, 12:28 AM
|
#7 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: New guy w/ issues :)
Welcome to the board from South Mississippi and good luck with your brakes.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
03-26-2006, 12:38 AM
|
#8 |
|
Born To Lose Club
Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,307
|
Re: New guy w/ issues :)
Welcome To The Board From The Great White North!!
__________________
Brian Smith  - "Born To Lose"1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
|
|
|
|
03-26-2006, 08:32 PM
|
#9 |
|
Post Whore
Join Date: Aug 2005
Location: Owensboro KY
Posts: 11,905
|
Re: New guy w/ issues :)
 from KY!
__________________
Drew '71 Chevy 350/TH350 Hugger Orange Currently just a rolling frame, body work soon to follow!!! Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=212927 Daily Driver: 1997 Chevrolet S-10 with more gears than pistons 
|
|
|
|
|
03-26-2006, 08:43 PM
|
#10 |
|
Registered User
Join Date: Aug 2005
Location: Omaha, NE
Posts: 32
|
Re: New guy w/ issues :)
Welcome from Nebraska
__________________
Does anyone know your here!  GOOD! 
|
|
|
|
|
03-27-2006, 12:23 AM
|
#11 |
|
Account Suspended
Join Date: Dec 2005
Location: SPOKANE, WASHINGTON
Posts: 1,001
|
Re: New guy w/ issues :)
Welcome from Washington State
|
|
|
|
|
03-27-2006, 03:06 PM
|
#12 |
|
Registered User
Join Date: Oct 2005
Location: NJ
Posts: 2
|
Re: New guy w/ issues :)
Thanks for all the help and warm welcomes! I'll let you guys know what I find out/end up doing.
All the best, Mike |
|
|
|
|
03-28-2006, 07:43 PM
|
#13 |
|
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: New guy w/ issues :)
2 THE BOARD FROM W. TN 
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
|
|
|
04-06-2006, 11:27 PM
|
#14 |
|
What are you looking at?
Join Date: Jul 2003
Location: Kellyville,Oklahoma
Posts: 308
|
Re: New guy w/ issues :)
welcome from Oklahoma
__________________
1971 GMC LWB 2005 Honda Element 2007 Honda Fit 
|
|
|
|
|
04-07-2006, 03:23 AM
|
#15 |
|
MooMoo
Join Date: Feb 2004
Location: Shapleigh, Maine
Posts: 2,424
|
Re: New guy w/ issues :)
welcome! and good luck on the brakes
__________________
'97 ext 4x4 3" body lift and 7'6" Fisher MM2 '04 Polaris 700 twin EFI **sold 2-1-07** '07 Polaris 800 twin EFI Stealth Limited Edition Support the Board! Or deal with me foo!  Its all fun and games till you find out shes 16. 
|
|
|
|
|
04-08-2006, 02:51 AM
|
#16 |
|
RIP Mr Ron
Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,150
|
Re: New guy w/ issues :)
Welcome to the board from West Tennessee. Good luck on your brake parts search. I know none of my trucks have one like that.
__________________
Ron (Mr Round Tuit)  Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
|
|
|
|
04-09-2006, 08:59 PM
|
#17 |
|
Where's my beer?
Join Date: Aug 2002
Location: I live in the state of denial....
Posts: 5,620
|
Re: New guy w/ issues :)
from PA! 
__________________
Paul How do you make the invisible, visible?.........You take it away. |
|
|
|
|
04-09-2006, 10:11 PM
|
#18 |
|
Drillin oil on American Soil!
Join Date: Apr 2005
Location: Minot. North Dakota
Posts: 418
|
Re: New guy w/ issues :)
 from ND!! Hope you get those brakes fixed.
__________________
Travis 70 Chevy c20 2wd 75 Chevy k10 4x4 parts truck 92 GMC Sierra c1500 2wd DD 99 Chevy Reg Cab Sht Box 1500 2wd 05 GMC Sierra Denali white |
|
|
|
|
04-09-2006, 10:26 PM
|
#19 |
|
Registered User
Join Date: Jan 2001
Location: Jackson, New Jersey
Posts: 1,560
|
Re: New guy w/ issues :)
welcome fellow new jerseyian
__________________
2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER) |
|
|
|
|
04-10-2006, 01:41 PM
|
#20 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: New guy w/ issues :)
welcome mike form il the rust belt.
mark |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
