68 Chevrolet clip on my 72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rusty72 · 03-31-2006, 12:48 PM

I would like to put a 68 Chevrolet clip on my 72.

From looking at the parts catalog I think I need:
67-68 Hood
67-68 Raidatator support
68 Fenders (I want the marker lights)
67-68 Bumper
67-68 filler panel (Grill)
Am I missing anything?

Does anyone make a reproduction filler panel (Grill) for the 67-68?

Richard Dobson · 03-31-2006, 12:58 PM

No one makes the grill aftermarket wise. Only the original parts, and finding a nice one is somewhat difficult. Good Luck.

**raggedjim** · 03-31-2006, 01:02 PM

The hood latch is different, trim rings for lights, trim rings for grill, and there is a support between the grill and radiator surround you will need.

As far as a repo grill, I'm not aware of anyone making one.

I think that's about it...

Good luck and welcome to the board, Roger

Joe67 · 03-31-2006, 01:33 PM

the grille isn't reproduced yet as stated above.
Nice bare grilles tend to go for about $100 or so

ohmsc10 · 03-31-2006, 01:55 PM

I am doing the same to my 71. If you already have a nice bumper, you could use that and eliminate the turn signals from the grill. That would save you the cost of a new bumper.

rusty72 · 03-31-2006, 02:43 PM

Thanks for the tips

*wolfthing2000* · 03-31-2006, 03:02 PM

I purchased the entire front clip with lights et all for a 68 that I am using on my 69. No rust with exception the front right fender inner area under the battery.

Cost 400, needs no body work.

I would look around if I were you.
Check all of the pick and pulls.

legends · 03-31-2006, 03:18 PM

the grill is reproduced, chevy duty lists it in thier catalog.

72armyswbtruck · 03-31-2006, 04:28 PM

I say find a good donor truck, swap it all over then, sell off the rest of the parts truck. Best way to work on these trucks in my opion

03-31-2006, 12:48 PM	#1
rusty72 Registered User Join Date: Mar 2006 Location: Vancouver Island Posts: 4	68 Chevrolet clip on my 72 I would like to put a 68 Chevrolet clip on my 72. From looking at the parts catalog I think I need: 67-68 Hood 67-68 Raidatator support 68 Fenders (I want the marker lights) 67-68 Bumper 67-68 filler panel (Grill) Am I missing anything? Does anyone make a reproduction filler panel (Grill) for the 67-68? __________________ ChevyRides

03-31-2006, 12:58 PM	#2
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Re: 68 Chevrolet clip on my 72 No one makes the grill aftermarket wise. Only the original parts, and finding a nice one is somewhat difficult. Good Luck. __________________ Richard Dobson

03-31-2006, 01:02 PM	#3
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,585	Re: 68 Chevrolet clip on my 72 The hood latch is different, trim rings for lights, trim rings for grill, and there is a support between the grill and radiator surround you will need. As far as a repo grill, I'm not aware of anyone making one. I think that's about it... Good luck and welcome to the board, Roger __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

03-31-2006, 01:33 PM	#4
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: 68 Chevrolet clip on my 72 the grille isn't reproduced yet as stated above. Nice bare grilles tend to go for about $100 or so __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

03-31-2006, 01:55 PM	#5
ohmsc10 Registered User Join Date: Feb 2006 Location: Hanover PA Posts: 24	Re: 68 Chevrolet clip on my 72 I am doing the same to my 71. If you already have a nice bumper, you could use that and eliminate the turn signals from the grill. That would save you the cost of a new bumper.

03-31-2006, 02:43 PM	#6
rusty72 Registered User Join Date: Mar 2006 Location: Vancouver Island Posts: 4	Re: 68 Chevrolet clip on my 72 Thanks for the tips __________________ ChevyRides

03-31-2006, 03:02 PM	#7
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: 68 Chevrolet clip on my 72 I purchased the entire front clip with lights et all for a 68 that I am using on my 69. No rust with exception the front right fender inner area under the battery. Cost 400, needs no body work. I would look around if I were you. Check all of the pick and pulls.

03-31-2006, 03:18 PM	#8
legends Registered User Join Date: Jul 2004 Location: lebanon pa Posts: 81	Re: 68 Chevrolet clip on my 72 the grill is reproduced, chevy duty lists it in thier catalog.

03-31-2006, 04:28 PM	#9
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: 68 Chevrolet clip on my 72 I say find a good donor truck, swap it all over then, sell off the rest of the parts truck. Best way to work on these trucks in my opion __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.