Serious HELP on SHAVED DOORS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nivimar · 05-27-2006, 03:10 PM

Hey anyone out there have/done a set of shaved doors yet,I have an 82 set with manual windows,I ca'nt seem to find a place for the solenoid I'm trying to think of A brace or bracket to fab so it could fit ,but everything I thought up is'nt feasible.

Need some Help Before I make A mistake.........

SlickSierra77 · 05-27-2006, 10:56 PM

I made a bracket right bove the arm rest bracket, it runs accross the hole in the door and clears the door pannel just fine. I will get some pics for you by tomorrow.

AesC10s · 05-30-2006, 05:55 PM

Quote:

Originally Posted by SlickSierra77

I made a bracket right bove the arm rest bracket, it runs accross the hole in the door and clears the door pannel just fine. I will get some pics for you by tomorrow.

NIV read this post again

piecesparts · 05-28-2006, 12:24 PM

revers everything and use "Bear Claw latches. Put the solenoids on the door post. That is what I did on the 68 Chevy.

nivimar · 05-28-2006, 04:22 PM

slick sierra I would appreciate that some photos would help,Pieseparts nice I do'nt have that style of lacth though.

SlickSierra77 · 05-30-2006, 02:55 PM

Here ya go.

nivimar · 05-30-2006, 04:38 PM

Thanks dude , I have question's will the door panel still fit or dose it get in the way?It look's like the same soelnoid ,what about the link is that A wire looping at the lacth and going to the inner rod?What is that attaching at the rod and the wire it looks as if it's acting as A brace/guide some how? I;m sorry if I sound ignorant of the subject but I've never done this before......LOL

SlickSierra77 · 05-30-2006, 07:07 PM

Its not really a wire but a small gauge rod. The clamp holds it to the main latch that opens the door from the inside. I have had this setup for over a year with no problems so far. Like I said it clears the door pannel just fine no problems with the pannel fitting over it.

nivimar · 05-31-2006, 03:37 AM

LOL, yeah no s**t ,ok Thanks again man I just made the bracket and now I'm going to start it cool.

SlickSierra77 · 05-31-2006, 06:54 AM

No prob man anytime.

05-27-2006, 03:10 PM	#1
nivimar Registered User Join Date: Apr 2006 Location: FRESNO Posts: 31	Serious HELP on SHAVED DOORS Hey anyone out there have/done a set of shaved doors yet,I have an 82 set with manual windows,I ca'nt seem to find a place for the solenoid I'm trying to think of A brace or bracket to fab so it could fit ,but everything I thought up is'nt feasible. Need some Help Before I make A mistake.........

05-27-2006, 10:56 PM	#2
SlickSierra77 SlickSierra Join Date: Aug 2005 Location: Keizer,Oregon Posts: 142	Re: Serious HELP on SHAVED DOORS I made a bracket right bove the arm rest bracket, it runs accross the hole in the door and clears the door pannel just fine. I will get some pics for you by tomorrow. __________________ '77 GMC Sierra 2wd SWB 355SB, TH350

05-28-2006, 12:24 PM	#4
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Serious HELP on SHAVED DOORS revers everything and use "Bear Claw latches. Put the solenoids on the door post. That is what I did on the 68 Chevy.

05-28-2006, 04:22 PM	#5
nivimar Registered User Join Date: Apr 2006 Location: FRESNO Posts: 31	Re: Serious HELP on SHAVED DOORS slick sierra I would appreciate that some photos would help,Pieseparts nice I do'nt have that style of lacth though.

05-30-2006, 02:55 PM	#6
SlickSierra77 SlickSierra Join Date: Aug 2005 Location: Keizer,Oregon Posts: 142	Re: Serious HELP on SHAVED DOORS Here ya go. Attached Images __________________ '77 GMC Sierra 2wd SWB 355SB, TH350

05-30-2006, 04:38 PM	#7
nivimar Registered User Join Date: Apr 2006 Location: FRESNO Posts: 31	Re: Serious HELP on SHAVED DOORS Thanks dude , I have question's will the door panel still fit or dose it get in the way?It look's like the same soelnoid ,what about the link is that A wire looping at the lacth and going to the inner rod?What is that attaching at the rod and the wire it looks as if it's acting as A brace/guide some how? I;m sorry if I sound ignorant of the subject but I've never done this before......LOL

05-30-2006, 07:07 PM	#8
SlickSierra77 SlickSierra Join Date: Aug 2005 Location: Keizer,Oregon Posts: 142	Re: Serious HELP on SHAVED DOORS Its not really a wire but a small gauge rod. The clamp holds it to the main latch that opens the door from the inside. I have had this setup for over a year with no problems so far. Like I said it clears the door pannel just fine no problems with the pannel fitting over it. __________________ '77 GMC Sierra 2wd SWB 355SB, TH350

05-31-2006, 03:37 AM	#9
nivimar Registered User Join Date: Apr 2006 Location: FRESNO Posts: 31	Re: Serious HELP on SHAVED DOORS LOL, yeah no s**t ,ok Thanks again man I just made the bracket and now I'm going to start it cool.

05-31-2006, 06:54 AM	#10
SlickSierra77 SlickSierra Join Date: Aug 2005 Location: Keizer,Oregon Posts: 142	Re: Serious HELP on SHAVED DOORS No prob man anytime. __________________ '77 GMC Sierra 2wd SWB 355SB, TH350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.