These tubular arms for stock shaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1LoC10 · 07-01-2006, 05:15 PM

what do you guys think of these? the drivers side is supposed to built to clear the stock shaft.. or would a multi link be just as good

1LoC10 · 07-01-2006, 05:15 PM

oh and its for when aired out and laying frame

hotrods316 · 07-01-2006, 06:06 PM

Man thats trick. Who built those control arms? I am planning on baggin a 67 step side and am trying to get a good knowledge base of everything. is you dont mind how much did they cost? Thanks and looks good!!

1LoC10 · 07-01-2006, 06:35 PM

These guys.. and they dont have a price on them.. i havent looked that far into them yet
http://www.settintrendz.com/

bodydropped · 07-03-2006, 09:00 AM

those are for a 73-87 trucks but would look killer on the 67-72s but they should clear because u can see were the notch is in the arms for the steerin arm

bagged74 · 07-03-2006, 11:59 PM

Quote:

Originally Posted by bodydropped

those are for a 73-87 trucks but would look killer on the 67-72s but they should clear because u can see were the notch is in the arms for the steerin arm

The arms are the same regardless of whether they are 67-72 or 73-87. They do look pretty sweet

smbrouss70 · 07-08-2006, 04:07 PM

1LoC10, where did you find those pics? I've looked all over their site and found nothing on those arms. It looks like they z'd the frame or did a stock floor body drop, but either of those should move the steering box up in relation to the cab, which would not leave a straight shot from the bottom of the column to the steering box. Any more info on what they did to that truck?

valleycustom · 07-10-2006, 01:52 PM

Those look good but I noticed one thing. Did they use DOM tubing for the arms?

Later
Jr

SCOTI · 07-10-2006, 09:02 PM

Quote:

Originally Posted by valleycustom

Those look good but I noticed one thing. Did they use DOM tubing for the arms?

Later
Jr

What if it's not DOM tubing?
Even if it wasn't, it should still be stronger vs. the stamped factory arms right? What do you guys think?

valleycustom · 07-10-2006, 09:40 PM

Quote:

Originally Posted by SCOTI

What if it's not DOM tubing?
Even if it wasn't, it should still be stronger vs. the stamped factory arms right? What do you guys think?

The thing with factory stamped parts is it's high carbon steel which is stronger than mild steel. With DOM you don't have a seam that can split under stress.

SCOTI · 07-11-2006, 12:44 AM

Quote:

Originally Posted by valleycustom

The thing with factory stamped parts is it's high carbon steel which is stronger than mild steel. With DOM you don't have a seam that can split under stress.

"I see said the blind man" . . .....

PBFAB.COM · 07-10-2006, 11:45 PM

Quote:

Originally Posted by valleycustom

Those look good but I noticed one thing. Did they use DOM tubing for the arms?

Later
Jr

Jr do you see an electricweld seam that I don't? You would think they're DOM or maybe even solid by the way the one side bent (no deformity). Looks like a good idea.

PBFAB.COM · 07-11-2006, 12:49 AM

Quote:

Originally Posted by porterbuilt

Jr do you see an electricweld seam that I don't? You would think they're DOM or maybe even solid by the way the one side bent (no deformity). Looks like a good idea.

Now I see it... I think the new black background made it jump out at me in the last pic!

*culookn* · 07-10-2006, 03:16 PM

whats the largest size wheel you can run with these? if they will allow a 22 to lay frame ill buy a set.

1LoC10 · 07-10-2006, 09:31 PM

im not sure... this is the forum where I seen them... I don't know anyhting about these guys, but I was interested in them
http://www.streetsourcemag.com/forum...M=False&S=True

07-01-2006, 05:15 PM	#1
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	These tubular arms for stock shaft what do you guys think of these? the drivers side is supposed to built to clear the stock shaft.. or would a multi link be just as good __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

07-01-2006, 05:15 PM	#2
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: These tubular arms for stock shaft oh and its for when aired out and laying frame __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

07-01-2006, 06:06 PM	#3
hotrods316 Registered User Join Date: Jun 2006 Location: d-town Posts: 11	Re: These tubular arms for stock shaft Man thats trick. Who built those control arms? I am planning on baggin a 67 step side and am trying to get a good knowledge base of everything. is you dont mind how much did they cost? Thanks and looks good!!

07-01-2006, 06:35 PM	#4
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: These tubular arms for stock shaft These guys.. and they dont have a price on them.. i havent looked that far into them yet http://www.settintrendz.com/ __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 07-01-2006 at 06:35 PM.

07-03-2006, 09:00 AM	#5
bodydropped Registered User Join Date: Jan 2005 Location: beaumont,tx Posts: 757	Re: These tubular arms for stock shaft those are for a 73-87 trucks but would look killer on the 67-72s but they should clear because u can see were the notch is in the arms for the steerin arm __________________ http://img.photobucket.com/albums/v5...ropped/sig.jpg

07-08-2006, 04:07 PM	#7
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: These tubular arms for stock shaft 1LoC10, where did you find those pics? I've looked all over their site and found nothing on those arms. It looks like they z'd the frame or did a stock floor body drop, but either of those should move the steering box up in relation to the cab, which would not leave a straight shot from the bottom of the column to the steering box. Any more info on what they did to that truck? __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

07-10-2006, 01:52 PM	#8
valleycustom Registered User Join Date: Mar 2005 Location: Modesto, Ca Posts: 225	Re: These tubular arms for stock shaft Those look good but I noticed one thing. Did they use DOM tubing for the arms? Later Jr __________________ Please become a site supporting vendor to advertise a business in your signature. you can do so here

07-10-2006, 03:16 PM	#14
culookn Account Suspended Join Date: Jun 2006 Location: nj Posts: 194	Re: These tubular arms for stock shaft whats the largest size wheel you can run with these? if they will allow a 22 to lay frame ill buy a set.

07-10-2006, 09:31 PM	#15
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: These tubular arms for stock shaft im not sure... this is the forum where I seen them... I don't know anyhting about these guys, but I was interested in them http://www.streetsourcemag.com/forum...M=False&S=True __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.