Cruise control lever F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 07-31-2006, 08:45 PM

Pretty nice cruise control/turn signal arm for sale. the chrome is very nice, the plastic end is nice, but the white lettering is a little chipped and sad looking.
All the wires are solid and apear to be in great shape.
This can be used on any GM of this era, it is 100% correct for some of the 2nd gen trans ams and camaros, most GM '70 big cars, but not 100% correct for the trucks, however, it is what you'll get if you go to buy a new replacement.

I'm looking for 15 bucks to your door.

Please respond here only... PM's will be ignored. If you are interested pending question answers, say you want it, otherwise, you won't have it reserved and the next one who simply says i want it... will get it. trying to keep it fair, first come first serve.
As always, no pay pal, cash, money order, postal money order....or if you must write a check, I'll take it.. but I'd rather not.

fade94 · 08-01-2006, 08:24 AM

I just found out that the lever on the van tilt I have, has had the wires cut. I have all of the cruise stuff except for a good lever and wires....
I'll take it. Let me know where to send MO.

Longhorn Man · 08-01-2006, 03:03 PM

Sweet... PM on the way.

OLDCHEV4X4 · 08-02-2006, 07:42 AM

Hey...that looks familiar.

Longhorn Man · 08-02-2006, 06:55 PM

LOL Randy. THAT one is in the longhorn right now hooked up to the tilt i installed in there.

fade94 · 08-16-2006, 07:54 AM

Got the lever. Many many thanks.

Longhorn Man · 08-17-2006, 06:01 AM

Sweet, thanks for letting me know.

07-31-2006, 08:45 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Cruise control lever F/S Pretty nice cruise control/turn signal arm for sale. the chrome is very nice, the plastic end is nice, but the white lettering is a little chipped and sad looking. All the wires are solid and apear to be in great shape. This can be used on any GM of this era, it is 100% correct for some of the 2nd gen trans ams and camaros, most GM '70 big cars, but not 100% correct for the trucks, however, it is what you'll get if you go to buy a new replacement. I'm looking for 15 bucks to your door. Please respond here only... PM's will be ignored. If you are interested pending question answers, say you want it, otherwise, you won't have it reserved and the next one who simply says i want it... will get it. trying to keep it fair, first come first serve. As always, no pay pal, cash, money order, postal money order....or if you must write a check, I'll take it.. but I'd rather not. Attached Images Last edited by Longhorn Man; 07-31-2006 at 08:46 PM.

08-01-2006, 08:24 AM	#2
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: Cruise control lever F/S I just found out that the lever on the van tilt I have, has had the wires cut. I have all of the cruise stuff except for a good lever and wires.... I'll take it. Let me know where to send MO. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 08-01-2006 at 08:25 AM.

08-01-2006, 03:03 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Cruise control lever F/S Sweet... PM on the way.

08-02-2006, 07:42 AM	#4
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: Cruise control lever F/S Hey...that looks familiar. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

08-02-2006, 06:55 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Cruise control lever F/S LOL Randy. THAT one is in the longhorn right now hooked up to the tilt i installed in there.

08-16-2006, 07:54 AM	#6
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: Cruise control lever F/S Got the lever. Many many thanks. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

08-17-2006, 06:01 AM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Cruise control lever F/S Sweet, thanks for letting me know.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.