69 shortwhell base for parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lawricker · 08-11-2006, 12:08 AM

I wondered upon a 69 shortwheel base pickup in pretty good shape considering. I was wondering if I can use the rear quarters on a Blazer.
Or might be someone that needs another project..
it was in a barn covered in dust, but other than the rear bottom of cab and lower front of the front fenders in pretty good shape. Hard to see dents through the dirt. but bed and all looked solid.

LUV2XCLR8 · 08-11-2006, 04:58 AM

Quote:

Originally Posted by lawricker

I was wondering if I can use the rear quarters on a Blazer.

YES, but they will need to be cut down just a little

**special-K** · 08-12-2006, 07:15 AM

Sell the panels,buy Blazer ones.That`s what I`d do.

onetonk5 · 08-12-2006, 07:06 PM

how do the repro parts fit and look??is that what you were talking about?

lawricker · 08-12-2006, 09:12 PM

I had to undo...about two days worth of work should have measured three times.. had a front pillar difference of 3/8 of an inch and couldn't make it look good so...undo and redo.. I haven't put on the repro stuff yet. other than pans and rockers..

08-11-2006, 12:08 AM	#1
lawricker Registered User Join Date: Jul 2006 Location: texas Posts: 56	69 shortwhell base for parts? I wondered upon a 69 shortwheel base pickup in pretty good shape considering. I was wondering if I can use the rear quarters on a Blazer. Or might be someone that needs another project.. it was in a barn covered in dust, but other than the rear bottom of cab and lower front of the front fenders in pretty good shape. Hard to see dents through the dirt. but bed and all looked solid. __________________ Retired and working my tail off..

08-12-2006, 07:15 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 69 shortwhell base for parts? Sell the panels,buy Blazer ones.That`s what I`d do. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-12-2006, 07:06 PM	#4
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: 69 shortwhell base for parts? how do the repro parts fit and look??is that what you were talking about?

08-12-2006, 09:12 PM	#5
lawricker Registered User Join Date: Jul 2006 Location: texas Posts: 56	Re: 69 shortwhell base for parts? I had to undo...about two days worth of work should have measured three times.. had a front pillar difference of 3/8 of an inch and couldn't make it look good so...undo and redo.. I haven't put on the repro stuff yet. other than pans and rockers.. __________________ Retired and working my tail off..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.