Newbie with pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DEALER1 · 08-22-2006, 10:56 AM

Just wanted to say hello and share my project pics.

chevy_mike · 08-22-2006, 04:17 PM

SWEET!

Is the rack hooked to the stock front end? I am assuming you are using dropped spindles, correct? Any problems with bump steer?

Keep up the work!!

DEALER1 · 08-22-2006, 04:54 PM

yes,,,complete cutom made spindles with wider offset.....No probs yet but never been driven either,,hehe

twotons · 09-04-2006, 01:57 AM

Nice ride dude, i have a 66 streeter i am worrking on,

I would love to get some more imfo on yours. IM if you would or just simplt post.

jgrh64 · 09-04-2006, 10:37 AM

oooooh purty !!!

krue · 09-04-2006, 10:55 AM

Welcome to the board from South Mississippi!

jsbgump · 09-04-2006, 11:40 AM

Welcome to the board from North Texas

nxtruck · 09-04-2006, 12:56 PM

Nice rides guys! Dealer1, what are your plans for the truck? What are you planning on running for an engine and how fast are you wanting to run?
Brian, what changes have you made to yours? I emailed you a few years ago about some info on fitting a bbc in one of these trucks. You sent me some pics of yours back then. I still haven't made the switch, as I've got a decent running 421 in it right now. But I would imagine that sooner or later I'll end up going with a big block. Thanks again for the pics and the info that you sent!!
Here are a few pics of my truck...

nxtruck · 09-04-2006, 12:56 PM

Here's one more...

lilpup69chevy · 09-04-2006, 01:45 PM

nxtruck you are from jackson missouri i see i'm from sikeston not too far away, do you ever race that down here? or do you race at gateway in st louis??? just curious

twotons · 09-04-2006, 05:17 PM

NXtruck Are you on the Bottle in that pic, that thing is skying hard core.

nxtruck · 09-04-2006, 06:59 PM

Lilpup, I do run at Sikeston some. Those pics are actually from the Benton, Mo. track when it was still running. I've only been to Sikeston once this year, so far.
Brian, no, those shots are all motor passes. The truck has went 1.55 60's on the motor. I haven't sprayed the 421 yet, but when I ran the old 377s on spray, it would go 1.50s in the 60'.
Weren't you building a 496? Did you ever finish it? This is the route I'd like to go if and when I go to a big block. Later, Chris

64hotrod · 09-14-2006, 10:10 PM

dealer1, truck looks sweet. i really want to install a r&p in my 64, what kind of rack is that and where can i get one. thanks, steve

DEALER1 · 09-18-2006, 02:19 AM

NX,,,thats awesome lookin ride u have there.

My plans are LS1 a4. I still have a LONGGGGGGGGGG way to go.

rack is pinto.

64hotrod · 09-20-2006, 11:53 PM

thanks for the close up on the rack dealer1. what kind of steering colum are you useing. truck is lookin good...keep it up. steve

DEALER1 · 09-21-2006, 01:10 AM

column is ididit..

also,,,i just wanted to share the fact that i recently ordered a full wiring kit from ebay for $409 and it IS

DEALER1 · 09-25-2006, 07:02 PM

LS1 project is on hold.....I gotta get this this driveable...Its killin me.

prin · 11-14-2006, 09:38 PM

Is that a model engine for a RC car? Man that thang is small!

DEALER1 · 11-19-2006, 01:42 AM

Quote:

Originally Posted by prin

Is that a model engine for a RC car? Man that thang is small!

Prin, You jus wait till its runnin. Its gonna smoke that lil blue thang u got.

U know,,,,,kinda the same way your TA couldnt keep up with mine.

CAL 58 GMC · 11-19-2006, 01:26 AM

That's going to be an awsome truck when your done!

DEALER1 · 11-19-2006, 01:43 AM

Quote:

Originally Posted by CAL 58 GMC

That's going to be an awsome truck when your done!

Thanks man, that means alot coming from a guy that has built one of the most beautiful trucks ive ever seen.

84 400 · 11-19-2006, 07:47 AM

Sweet! welcome to the board

Igotachevyor2 · 11-19-2006, 08:01 AM

sweet fleet

64 C-10 · 11-19-2006, 10:10 AM

Nice !!!

DEALER1 · 11-19-2006, 04:36 PM

havent done much but, here is a few updates.

08-22-2006, 10:56 AM	#1
DEALER1 Registered User Join Date: Aug 2006 Location: Huntsville Alabama Posts: 48	Newbie with pics Just wanted to say hello and share my project pics.

08-22-2006, 04:17 PM	#2
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Newbie with pics SWEET! Is the rack hooked to the stock front end? I am assuming you are using dropped spindles, correct? Any problems with bump steer? Keep up the work!!

08-22-2006, 04:54 PM	#3
DEALER1 Registered User Join Date: Aug 2006 Location: Huntsville Alabama Posts: 48	Re: Newbie with pics yes,,,complete cutom made spindles with wider offset.....No probs yet but never been driven either,,hehe

09-04-2006, 01:57 AM	#4
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: Newbie with pics Nice ride dude, i have a 66 streeter i am worrking on, I would love to get some more imfo on yours. IM if you would or just simplt post. __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif

09-04-2006, 10:37 AM	#5
jgrh64 Prestige member Old Farts Club Join Date: Nov 2005 Location: Cleveland Posts: 502	Re: Newbie with pics oooooh purty !!! __________________ Hey sombodys gotta do it!

09-04-2006, 10:55 AM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Newbie with pics Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

09-04-2006, 11:40 AM	#7
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Newbie with pics Welcome to the board from North Texas __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

09-04-2006, 12:56 PM	#8
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Newbie with pics Nice rides guys! Dealer1, what are your plans for the truck? What are you planning on running for an engine and how fast are you wanting to run? Brian, what changes have you made to yours? I emailed you a few years ago about some info on fitting a bbc in one of these trucks. You sent me some pics of yours back then. I still haven't made the switch, as I've got a decent running 421 in it right now. But I would imagine that sooner or later I'll end up going with a big block. Thanks again for the pics and the info that you sent!! Here are a few pics of my truck...

09-04-2006, 12:56 PM	#9
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Newbie with pics Here's one more...

09-04-2006, 01:45 PM	#10
lilpup69chevy 67-72 parts finder Join Date: Aug 2006 Location: southeast mo Posts: 788	Re: Newbie with pics nxtruck you are from jackson missouri i see i'm from sikeston not too far away, do you ever race that down here? or do you race at gateway in st louis??? just curious __________________ 1969 chevy shortstep 2wd (under construction) 1981 chevy scottsdale lwb 2wd (parts chaser) 2004 pontiac gto (daily driver) 2004 pontiac grand prix gt (the ol ladys car) 1985 chevy short wide 1970 chevy c10 lwb (another parts rig) 1969 gmc lwb (rainy day project) 1968 chevy lwb c10 250 I6 3 spd (soon to be swb)

09-04-2006, 05:17 PM	#11
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: Newbie with pics NXtruck Are you on the Bottle in that pic, that thing is skying hard core. __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif

09-04-2006, 06:59 PM	#12
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Newbie with pics Lilpup, I do run at Sikeston some. Those pics are actually from the Benton, Mo. track when it was still running. I've only been to Sikeston once this year, so far. Brian, no, those shots are all motor passes. The truck has went 1.55 60's on the motor. I haven't sprayed the 421 yet, but when I ran the old 377s on spray, it would go 1.50s in the 60'. Weren't you building a 496? Did you ever finish it? This is the route I'd like to go if and when I go to a big block. Later, Chris

09-14-2006, 10:10 PM	#13
64hotrod Registered User Join Date: Aug 2006 Location: Santa Rosa, Ca. Posts: 19	Re: Newbie with pics dealer1, truck looks sweet. i really want to install a r&p in my 64, what kind of rack is that and where can i get one. thanks, steve

09-18-2006, 02:19 AM	#14
DEALER1 Registered User Join Date: Aug 2006 Location: Huntsville Alabama Posts: 48	Re: Newbie with pics NX,,,thats awesome lookin ride u have there. My plans are LS1 a4. I still have a LONGGGGGGGGGG way to go. rack is pinto.

09-20-2006, 11:53 PM	#15
64hotrod Registered User Join Date: Aug 2006 Location: Santa Rosa, Ca. Posts: 19	Re: Newbie with pics thanks for the close up on the rack dealer1. what kind of steering colum are you useing. truck is lookin good...keep it up. steve __________________ '64 c-10 short stepside 400 sb or 402 bb/ th400 rebuild,ongoing project,can of worms. '71 c-20 long fleet for parts '69 c-10 long rolling frame '70 c-20 long fleet work truck



Register or Log In To remove these advertisements.

09-21-2006, 01:10 AM	#16
DEALER1 Registered User Join Date: Aug 2006 Location: Huntsville Alabama Posts: 48	Re: Newbie with pics column is ididit.. also,,,i just wanted to share the fact that i recently ordered a full wiring kit from ebay for $409 and it IS

09-25-2006, 07:02 PM	#17
DEALER1 Registered User Join Date: Aug 2006 Location: Huntsville Alabama Posts: 48	Re: Newbie with pics LS1 project is on hold.....I gotta get this this driveable...Its killin me.

11-14-2006, 09:38 PM	#18
prin Registered User Join Date: Oct 2006 Location: Huntsville, AL Posts: 172	Re: Newbie with pics Is that a model engine for a RC car? Man that thang is small!

11-19-2006, 01:26 AM	#20
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Newbie with pics That's going to be an awsome truck when your done! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

11-19-2006, 07:47 AM	#22
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: Newbie with pics Sweet! welcome to the board __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

11-19-2006, 08:01 AM	#23
Igotachevyor2 Apache Club Join Date: Jan 2006 Location: Goodlettsville,Tn. Posts: 1,294	Re: Newbie with pics sweet fleet __________________ 58 CHEVY APACHE I 74 CHEVY C-10 I 78 K-10 donor truck I 89 SONOMA My Trucks Apache Sitting Idle MySpace Project Dad's Truck (74 C-10 to K-10 conversion) .

11-19-2006, 10:10 AM	#24
64 C-10 Registered User Join Date: Jul 2006 Location: Northwest Georgia Posts: 37	Re: Newbie with pics Nice !!!

11-19-2006, 04:36 PM	#25
DEALER1 Registered User Join Date: Aug 2006 Location: Huntsville Alabama Posts: 48	Re: Newbie with pics havent done much but, here is a few updates.

Register or Log In To remove these advertisements.