|
|
|
09-11-2006, 09:13 AM
|
#1 |
|
Registered User
Join Date: Aug 2006
Location: montgomery texas
Posts: 44
|
do i have a 71 1/2 ?
my project has a rearview mounted to the cab not the windshield but the vin says it is a 72 and was born in flint
|
|
|
|
09-11-2006, 10:18 AM
|
#2 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: do i have a 71 1/2 ?
That's interesting, someone else posted the same thing a while back. If the build sheet can't be found (in the seat springs somewhere) look for a date stamp on your frame rails. I don't know how the chevys are but my GMC is stamped on the passenger side between the front and rear cab rubber mounts.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|
|
|
|
|
09-11-2006, 10:41 AM
|
#3 |
|
Registered User
Join Date: Aug 2006
Location: montgomery texas
Posts: 44
|
Re: do i have a 71 1/2 ?
ok will do
thx |
|
|
|
|
09-11-2006, 11:03 AM
|
#4 |
|
YA YA
Join Date: Aug 2004
Location: Rockledge, Fl
Posts: 1,273
|
Re: do i have a 71 1/2 ?
Any chance that the cab has been swapped? Does the vin plate have regular rivets or 'rose bud' style rivets?
__________________
Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707 |
|
|
|
|
09-11-2006, 11:10 AM
|
#5 | |
|
Registered User
Join Date: Aug 2006
Location: montgomery texas
Posts: 44
|
Re: do i have a 71 1/2 ?
Quote:
thx |
|
|
|
|
|
09-12-2006, 05:47 PM
|
#6 | |
|
Registered User
Join Date: Aug 2006
Location: montgomery texas
Posts: 44
|
Re: do i have a 71 1/2 ?
Quote:
|
|
|
|
|
|
09-11-2006, 11:41 AM
|
#7 |
|
Senior Member
 Join Date: Mar 2004
Location: Somewhere
Posts: 985
|
Re: do i have a 71 1/2 ?
my 71 chevy has the window mounted mirror just like my 69gmc does so i wouldn't say thats a good way to id a cab
|
|
|
|
|
09-11-2006, 11:54 AM
|
#8 | |
|
Senior Member
Join Date: Jul 2004
Location: Sweden
Posts: 833
|
Re: do i have a 71 1/2 ?
Quote:
Windshield mounted rear view mirror but has 71 Fremont VIN. VIN plate has rose bud rivets.
__________________
Mats.. ---------------------------------------------------- 1971 Cheyenne Super Custom Camper 475CBB/TH400/AC 1992 Silverado Sport Truck 1988 Silverado 2500 Ext Longbed 4x4 2001 GMC Sierra SLT 4x4 1990 Chevrolet K3500 1965 Pontiac Grand Prix 1980 Z 28 350/4-speed/AC/T-top 1980 Camaro Coupe V6/3-speed 1979 Buick Century Wagon |
|
|
|
|
|
09-11-2006, 12:25 PM
|
#9 |
|
YA YA
Join Date: Aug 2004
Location: Rockledge, Fl
Posts: 1,273
|
Re: do i have a 71 1/2 ?
Interesting to say the least. Possible that the plants had an excess of 71 cabs when the changes were made? Interested to know the answer myself.
__________________
Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707 |
|
|
|
|
09-11-2006, 04:30 PM
|
#10 |
|
Registered User
Join Date: Jun 2006
Location: concord, north carolina
Posts: 50
|
Re: do i have a 71 1/2 ?
hey mine is the same way mirror on cab and 72 vin number
what do the doors look like , I ve heard that a 72 has a screw right below the vent window on the inside but mine does not have that either??? |
|
|
|
|
09-11-2006, 05:48 PM
|
#11 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: do i have a 71 1/2 ?
are these all C-10's.The one tons may be slightly different,but I really do not know.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
09-11-2006, 06:07 PM
|
#12 |
|
Senior Member
Join Date: Jun 2006
Location: Arkansas
Posts: 227
|
Re: do i have a 71 1/2 ?
My 72 one ton has the roof mounted mirror as well. BUT, the vin plate has been removed previously for rocker repair from a collision. I'm confident the cab is correct and the VIN on the door jamb matches the frame VIN. It might very well have been a by plant , by supply / or by mood kind of deal.
__________________
"They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Ben Franklin |
|
|
|
|
09-11-2006, 08:28 PM
|
#13 |
|
Registered User
Join Date: Feb 2005
Location: Huntsville, Alabama
Posts: 107
|
Re: do i have a 71 1/2 ?
My 71 has the roof mounted mirror. Is that what it's supposed to have?
|
|
|
|
|
09-11-2006, 08:35 PM
|
#14 | |
|
YA YA
Join Date: Aug 2004
Location: Rockledge, Fl
Posts: 1,273
|
Re: do i have a 71 1/2 ?
Quote:
__________________
Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707 |
|
|
|
|
|
09-11-2006, 09:12 PM
|
#15 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: do i have a 71 1/2 ?
A 72 with the mirror mounted to the cab is easy to explain... we've all seen the mirrors fall off the glass, esp you guys in the south. After it falling down and glueing it on 2 or 3 times, you say screw it... literally, and get an older style mirror. They were avalible as a factory accessory, so the dealers probably had them on there shelf for all the 69 and older trucks that never came with one.
As far as a 71 with no holes in the roof, something else is odd there. in 71, and ONLY 71, there was a raised pad in the sheet metal where the mirror goes. That VIN plate shown is of a very late 71. With a serial number that high, I wouldn't be one bit suprised if it was one of the last 71's goin down the line.... with next year's cab. All you 71 owners with no holes, mounting pad, or evendence of tampering (cab swap, funny rivits) look at your VIN, and look at the sequence number... see if it is real high. |
|
|
|
|
09-11-2006, 11:39 PM
|
#16 |
|
Registered User
Join Date: Apr 2003
Location: Oklahoma City
Posts: 605
|
Re: do i have a 71 1/2 ?
OK here is another ? do they make billit mirrors for roof mounted RV mirrors?
__________________
2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver) |
|
|
|
|
09-12-2006, 07:34 AM
|
#17 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: do i have a 71 1/2 ?
All you guys with`72s and ceiling mounted mirrors,Do you have the`72 VIN numbers with the pre-fixes"C"(two total)for Chevys and "T" for GMCs?Sometimes the MVAs titled a truck by date of first registration.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
09-12-2006, 08:13 AM
|
#18 |
|
Senior Member
Join Date: Jun 2006
Location: Arkansas
Posts: 227
|
Re: do i have a 71 1/2 ?
yup . CC in my VIN with a 2 where it's supposed to be. Longhorns explanation makes good sense. JMHO, Dean
__________________
"They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Ben Franklin |
|
|
|
|
09-12-2006, 03:42 PM
|
#19 |
|
Senior Member
Join Date: Feb 2005
Location: Maynardville, Tn
Posts: 3,030
|
Re: do i have a 71 1/2 ?
Didn't the 69-71's have a raised area on the ceiling to mount the mirror? 67-68 were flat just like the 72's.
__________________
SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet |
|
|
|
|
09-12-2006, 07:28 PM
|
#20 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: do i have a 71 1/2 ?
woodridge, in 69 the mirror was still an option, not all trucks had it. but no, the panel was flat there in ALL years except 71. I can show you shots on my 2 70's and my 69...
|
|
|
|
|
09-12-2006, 09:03 PM
|
#21 |
|
Senior Member
Join Date: Feb 2005
Location: Maynardville, Tn
Posts: 3,030
|
Re: do i have a 71 1/2 ?
Just came from looking at an all original 71 C-70, it was flat where the mirror would go, I know this is kinda apples and oranges since the carry over of C-40 and bigger cabs is more likely but you never know what was done in assembly, one plant may have run out of flat panels before production was over and used some 72 pieces and some plants may have just used up some left over 71 panels. Who knows, that one thing that makes these trucks even more interesting.
Longhorn, thanks for the info, seems like no matter how much you (meaning me) thought you knew, you can just learn some more.
__________________
SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet |
|
|
|
|
09-12-2006, 09:10 PM
|
#22 |
|
67-72 parts finder
Join Date: Aug 2006
Location: southeast mo
Posts: 788
|
Re: do i have a 71 1/2 ?
71 also has the black stripe around the grille but thats never a sure fire way to tell anything as someone could swap grilles, as for the doors as well too easy to swap them over, but vin numbers don't lie well unless they have been swiped lol
__________________
  1969 chevy shortstep 2wd (under construction)1981 chevy scottsdale lwb 2wd (parts chaser) 2004 pontiac gto (daily driver) 2004 pontiac grand prix gt (the ol ladys car) 1985 chevy short wide 1970 chevy c10 lwb (another parts rig) 1969 gmc lwb (rainy day project) 1968 chevy lwb c10 250 I6 3 spd (soon to be swb) |
|
|
|
|
09-12-2006, 11:27 PM
|
#23 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: do i have a 71 1/2 ?
wood... i learn plenty every night on here... I know what you're saying.
|
|
|
|
|
09-13-2006, 07:38 AM
|
#24 |
|
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: do i have a 71 1/2 ?
An interior rearview would be an option in all medium duty trucks.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
