|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
11-05-2006, 05:52 PM
|
#1 |
|
The Hammer Man
 
Join Date: Oct 2006
Location: Wilmington, NC
Posts: 864
|
steering wheel removal answer or diagram
I have a later model tilt steering wheel and the turn signal arm became loose and eventually came out. I half attempted to remove the steering wheel but its more than just a bid nut and three little screws. Does anyone have a posted diagram or and easy 123 step chart? does it require a gear type puller or is there a hiding snap ring?
TIA |
|
|
|
11-05-2006, 06:28 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: steering wheel removal answer or diagram
You need a steering wheel puller. They are cheap, or, you could rent one from one of the parts store chains
|
|
|
|
|
11-05-2006, 06:33 PM
|
#3 |
|
The Hammer Man
Join Date: Oct 2006
Location: Wilmington, NC
Posts: 864
|
Re: steering wheel removal answer or diagram
ok great. i'll go buy one thanks longhorn
|
|
|
|
|
11-05-2006, 06:43 PM
|
#4 |
|
Registered User
Join Date: Oct 2006
Location: Southern Kalifornia
Posts: 3,066
|
Re: steering wheel removal answer or diagram
you may have to get a locking plate remover also,not sure if only columns with keys have that or not.Does your steering wheel lock?
|
|
|
|
|
11-05-2006, 07:44 PM
|
#5 |
|
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 20,084
|
Re: steering wheel removal answer or diagram
Did you try using one of your lead hammers?
|
|
|
|
|
11-05-2006, 07:54 PM
|
#6 |
|
The Hammer Man
Join Date: Oct 2006
Location: Wilmington, NC
Posts: 864
|
Re: steering wheel removal answer or diagram
funny. actually the thought crossed my mind but i was home and there are none there.
__________________
Boise69. Bought in Boise ID and its a '69 ___________________________________________ 1969 Chevy C-10 SWB 350/400 - drivable project www.americanhammer.com 2013 MBZ Sprinter customized 2005 MBZ Sprinter Van 2004 Land Rover Discovery 2001 Yamaha Road Star 1997 MBZ E420 1989 Ferrari Mondial T |
|
|
|
|
11-05-2006, 09:09 PM
|
#7 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: steering wheel removal answer or diagram
lock plate depreso will not be needed, that is only for collumns that lock when you turn them off.
You can get away with hammers on non tilt columns... but don't try it on a tilt. I have one here that i ruined that way becouse I was too impatient to go and get my wheel remover. |
|
|
|
|
11-05-2006, 11:04 PM
|
#8 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: steering wheel removal answer or diagram
Take the nut loose on the column, plant your feet on the floor,pull pressure up on 1 side of the wheel, & YANK the other side. this will take the wheel off......but DO NOT take the nut all the way off, or you will be wearing that steer wheel around your ears (dont ask
 )  L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
