I need to get this @$%&* steering wheel off! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIG CTY · 11-18-2006, 09:03 AM

I put one of the cheapy (IMO) Grant steering wheels in my bucket. I cant begin to tell you how much easier it became to drive my truck with my 6'5" 265 frame with a much smaller wheel. Anyway I tightened it down WAY to far, I didnt put the signal light cancel thing on, and the horn always blows (I have since straight wired a horn) so I screwed something up there too. I want to take it off and start over, BUT I tried to do that the first time and couldnt get holes to line up for the use of the steering wheel puller I have. What in the he!! do I need to do to get this adapter off? Drill a hole in it? Maybe use a different type of puller? This is the wheel I

"installed":

It looks like something like this MIGHT work:

but before I go buying things I'd like some input.

!

**Chevy Fleetside** · 11-18-2006, 10:31 AM

Yes that puller will work if you have the screw holes in the adapter.. That is what I usually use to pull steering wheels and seems to work everytime...

11-18-2006, 09:03 AM	#1
BIG CTY Between the earth and the sky Join Date: Oct 2006 Location: Chesapeake, VA Posts: 822	*I need to get this @$%& steering wheel off!** I put one of the cheapy (IMO) Grant steering wheels in my bucket. I cant begin to tell you how much easier it became to drive my truck with my 6'5" 265 frame with a much smaller wheel. Anyway I tightened it down WAY to far, I didnt put the signal light cancel thing on, and the horn always blows (I have since straight wired a horn) so I screwed something up there too. I want to take it off and start over, BUT I tried to do that the first time and couldnt get holes to line up for the use of the steering wheel puller I have. What in the he!! do I need to do to get this adapter off? Drill a hole in it? Maybe use a different type of puller? This is the wheel I "installed": It looks like something like this MIGHT work: but before I go buying things I'd like some input. ! __________________ Chris - 1966 C10 Shortbed Fleetside, 1991 GMC Sierra 1500 Extended Cab, 1993 Blazer Sport 4x4 My other rides: 1969 Chevrolet Impala SS427 Convertible 1976 Dodge Tradesman B200 2002 Nissan Maxima 6 speed 2004 Mercedes Benz CL500

11-18-2006, 10:31 AM	#2
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	*Re: I need to get this @$%& steering wheel off!** Yes that puller will work if you have the screw holes in the adapter.. That is what I usually use to pull steering wheels and seems to work everytime...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.