Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
11-19-2006, 03:01 AM | #1 |
Registered User
Join Date: May 2001
Location: Arizona
Posts: 758
|
What type of bag for the rear?
I am thinking about putting bags on my truck, and am trying to figure out which bag to use for the rear. We put bags on the back of my dad's 01 full size and when we bought the kit, it came with the standard convoluted(I think?...they have the two squashed balloon shape) bags. Then we decided to buy the airride kit for the rear and it came with the sleave type.
My question is which bag do I need for the back of my truck? If I use a convoluted, do I need the 2500 lb or the 2600 lb? Thanks for your help! Low68
__________________
Build Thread |
11-19-2006, 03:36 AM | #2 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: What type of bag for the rear?
Both will work but the 2500# dbl. convoluted style bag is recommended for 64~72's.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
11-19-2006, 09:32 AM | #3 |
Outlandish Trends - FL
Join Date: Jul 2005
Location: Orlando
Posts: 1,396
|
Re: What type of bag for the rear?
The convoluted is best for the rear. I would go with 2600# bags all around, front and back. I've got Slam Specialties RE7 in my truck and love them.
__________________
-Bret 67 short-fleet sold! |
11-19-2006, 11:18 AM | #4 |
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Re: What type of bag for the rear?
I have Firestone bags on my heap ... 2,500 lbs. on the rear & 2,600 lbs. on the front.
|
11-19-2006, 10:09 PM | #5 |
Registered User
Join Date: May 2001
Location: Arizona
Posts: 758
|
Re: What type of bag for the rear?
Thanks guys! I appreciate the help.
One more quick question...Do you run water traps on your setup and is it that important? Thanks again. Low68
__________________
Build Thread |
11-20-2006, 12:25 PM | #6 |
Formerly LSC71
Join Date: Feb 2004
Location: Indiana
Posts: 186
|
Re: What type of bag for the rear?
If you are putting them on a 68 with the trailing arm suspension go with the 2500# springs they will provide plenty of lift capacity and give you a good ride quality. Typically the sleeve style are only used when you are placing the airpsrings directly in front or back of the axle. They give you more lift but have a lower spring rate than the double convoluted springs which will give you a better ride quality in that location. On the trailing arm setup you have a mechanical leverage against the spring location and thats what helps make the double convoluted spring work better there.
|
11-20-2006, 02:36 PM | #7 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: What type of bag for the rear?
I am trying to find a place to mount water traps. I have seen some that run between the compressor and tank, but that doesn't make much sense to me. I would think there is a lot more water build up in the tank with air sitting, so I want to run a trap between the tank and valves.
My valves aren't mounted to my tank, so I have room to put it in. It's just a matter of mounting location right now. |
11-20-2006, 04:55 PM | #8 |
Formerly LSC71
Join Date: Feb 2004
Location: Indiana
Posts: 186
|
Re: What type of bag for the rear?
you're right. the moisture forms in the tank from the heated air coming from the compressor cooling off in the tank creates the moisture, so your water trap would work better on the line going from the tank to the valves.
|
Bookmarks |
|
|