Parts off my or for my 72 F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tphsmith · 11-19-2006, 09:08 AM

Finaly have my truck from the paint shop and need to clean the garage. everything listed can have pictures taken and be posted. thanks in advance
prices do NOT INCLUDE shipping
front windshield, no shipping on this $60.00 little tiny glare pits in it
smooth no name chrome SB valve covers , style for oil fill $20.00 (sold )
door sill plates some rust on bottom side will clean up nice $12.00 (sold pending payment)

this did not come off the truck I bought for Air bag system but it is a remanufactured and it runs off drive belt system it was built by York. this stlye is used by off roaders to refill tire presure after off roading.
York compressor $65.00
Drivers side window regulator $10.00
Door latch controlls both sides $10.00( Sold to Kantosensei )
Door lock and ignition cylinder with matching keys $5.00 ( sold to alfeefish )
4 barrel Air cleaner I dont think this is original from factory $15.00
In-cab Gas vapor line 5/16 dia. $12.00
Mr Gasket 4 barrel carburator adaptor plate $7.50
no name 4 barrel carburator adaptor plate $5.00
SB long water pump pulley set, crank is 3 groove water pump is 2 groove $15.00 (SOLD to jamesi20)
A/C ball vents and center vent and A/C control (one arm needs replaced) $20.00 (Sold pending payment)
brand new blazer gas tank straps and hooks $20.00 ( sold to alfeefish)
door pillar presure relief valve $4.00
Gas filler tube gasket brand new $2.00 (Sold to Cornfed63 )
steering column cover seal brand new $2.00
brand new after market they look like original style window crank handles $8.00 (sold pending payment)
brand new hood to cowl seal $6.00 (Sold to Kantosensei)
used gas brake park brake pads $3.00
brand new after market 4 core radiator, NO SHIPPING on this $180.00
in cab, under dash heater assembly, correction it does have the core in it $30.00
rear window rubber brand new for 67/68 small window $20.00 (Sold pending payment)

front fender seal kit brand new $8.00 (Sold Pending Payment)

67Fleet · 11-19-2006, 09:21 AM

If the York is a 210 I'll take it.

tphsmith · 11-19-2006, 09:35 AM

67 Fleet let me go check right now

tphsmith · 11-19-2006, 09:43 AM

67 fleet the tag on the compressor says
No. 026
PT. VR4912T-30046
thats all I know about it, so I didnt answer your question if this a 210 or not. sorry maybe you know

alfeefish · 11-19-2006, 11:25 AM

Quote:

Originally Posted by tphsmith

67 fleet the tag on the compressor says
No. 026
PT. VR4912T-30046
thats all I know about it, so I didnt answer your question if this a 210 or not. sorry maybe you know

Hi, I'llm take blazer staps and Ignition and door cylenders. Shipping Please to 37341. Thanks

tphsmith · 11-19-2006, 08:28 PM

I will do pay -pal
apfeefish shipping for the blazer straps and the ign. and door lock set would be $5.48

Jamesi20 the pully's shipping would be $8.35

cornfed yes it is

Bab Moore alfeefish is first in line for the blazer staps, but the front fender seal I will post a pic here as soon as I can.

Kantosensei, I will post pics her as soon as posible,with pics of the hood to cowl seal, I will have to open the package to take a picture of it

I will post pics from requests as soon as possible

boogie67 · 11-19-2006, 01:41 PM

I'll take the door lock set.Mo ok?

boogie67 · 11-19-2006, 01:44 PM

I see alfeefish already called the locks so put me in second on them.I'll take door handles let me know.

jamesi20 · 11-19-2006, 01:51 PM

I'll take the pulley's...let me know shipping to 44401 and what method of payment you want. Thanks,Jim

corn · 11-19-2006, 02:43 PM

(Gas filler tube gasket brand new $2.00)

Is this the cab/filler tube seal? If so, Ill take it...

Bob Moore · 11-19-2006, 04:41 PM

Pictures please of Blazer gas tank straps and hooks. Also picture of Front fender seal kit.

Also method of payment.

Thanks - Bob

Kantosensei · 11-19-2006, 05:24 PM

Can you send me pictures of the door latch controls and hood to cowl seal. Also, give me payment instructions and shipping to 96349. Thanks David

boogie67 · 11-19-2006, 08:41 PM

[I will do pay -pal
apfeefish shipping for the blazer straps and the ign. and door lock set would be $5.48 ] I guess that leaves me out.Thanks anyway.

tphsmith · 11-19-2006, 08:48 PM

67 fleet a pic of the york compressor

corn · 11-19-2006, 08:52 PM

I sent you a PM. Thank you...

Bob Moore · 11-19-2006, 09:16 PM

tphsmith - sorry I did not see I was 2nd on the blazer straps. If the fender seals are like the ones sold by GMCPaul and include the metal tabs thats great.

tphsmith · 11-19-2006, 10:03 PM

Bob moore yes they have the metal clips with them Im trying to get pics posted

tphsmith · 11-19-2006, 10:15 PM

Kantosensei here are the pics of the door latchs and cowl to hood seal

tphsmith · 11-19-2006, 10:18 PM

bob moore here are pics of the front fender seals

Kantosensei · 11-19-2006, 11:16 PM

I'll take the latches and hood to cowl seal. Please give me a shipping price to 96349 and your paypal info. This is a FPO AP military address, if you are not familiar I will send you an explanation.--Thanks David

454_72_4X4 · 11-19-2006, 11:49 PM

Put me inline for the front fender seals. They are a complete set, (for both sides), correct?

tphsmith · 11-20-2006, 12:39 AM

454_72__4x4 tis a brand new set I pulled them out of the bag to take the picture, your 2nd in line for the seals

daves71k5 · 11-20-2006, 01:25 AM

Interested in sill plates, rear window rubber seal and front fender seals (if they are still available). Would like to see a pic of the sill plates if I could.
Figure shipping to Idaho 83211 thanks Dave

396muncie · 11-20-2006, 10:16 AM

If you're for sure the driver side window regulator is for a 72, can you please post a pic? How much for shipping to 17520(PA)? Thanks

tphsmith · 11-20-2006, 02:20 PM

396muncie, is there a diffrence on the widow regulators from 67-72?. the regulator I have is off my 72 but the door was not a 72 door. so thats what I know about the regulator. if you still want to see a picture of it I can post one tonight

11-19-2006, 09:08 AM	#1
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Parts off my or for my 72 F/S Finaly have my truck from the paint shop and need to clean the garage. everything listed can have pictures taken and be posted. thanks in advance prices do NOT INCLUDE shipping front windshield, no shipping on this $60.00 little tiny glare pits in it smooth no name chrome SB valve covers , style for oil fill $20.00 (sold ) door sill plates some rust on bottom side will clean up nice $12.00 (sold pending payment) this did not come off the truck I bought for Air bag system but it is a remanufactured and it runs off drive belt system it was built by York. this stlye is used by off roaders to refill tire presure after off roading. York compressor $65.00 Drivers side window regulator $10.00 Door latch controlls both sides $10.00( Sold to Kantosensei ) Door lock and ignition cylinder with matching keys $5.00 ( sold to alfeefish ) 4 barrel Air cleaner I dont think this is original from factory $15.00 In-cab Gas vapor line 5/16 dia. $12.00 Mr Gasket 4 barrel carburator adaptor plate $7.50 no name 4 barrel carburator adaptor plate $5.00 SB long water pump pulley set, crank is 3 groove water pump is 2 groove $15.00 (SOLD to jamesi20) A/C ball vents and center vent and A/C control (one arm needs replaced) $20.00 (Sold pending payment) brand new blazer gas tank straps and hooks $20.00 ( sold to alfeefish) door pillar presure relief valve $4.00 Gas filler tube gasket brand new $2.00 (Sold to Cornfed63 ) steering column cover seal brand new $2.00 brand new after market they look like original style window crank handles $8.00 (sold pending payment) brand new hood to cowl seal $6.00 (Sold to Kantosensei) used gas brake park brake pads $3.00 brand new after market 4 core radiator, NO SHIPPING on this $180.00 in cab, under dash heater assembly, correction it does have the core in it $30.00 rear window rubber brand new for 67/68 small window $20.00 (Sold pending payment) front fender seal kit brand new $8.00 (Sold Pending Payment) __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck Last edited by tphsmith; 11-25-2006 at 08:12 AM. Reason: add item

11-19-2006, 09:21 AM	#2
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: Parts off my or for my 72 F/S If the York is a 210 I'll take it. __________________ -Bret 67 short-fleet sold!

11-19-2006, 09:35 AM	#3
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S 67 Fleet let me go check right now __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-19-2006, 09:43 AM	#4
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S 67 fleet the tag on the compressor says No. 026 PT. VR4912T-30046 thats all I know about it, so I didnt answer your question if this a 210 or not. sorry maybe you know __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-19-2006, 08:28 PM	#6
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S I will do pay -pal apfeefish shipping for the blazer straps and the ign. and door lock set would be $5.48 Jamesi20 the pully's shipping would be $8.35 cornfed yes it is Bab Moore alfeefish is first in line for the blazer staps, but the front fender seal I will post a pic here as soon as I can. Kantosensei, I will post pics her as soon as posible,with pics of the hood to cowl seal, I will have to open the package to take a picture of it I will post pics from requests as soon as possible __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-19-2006, 01:41 PM	#7
boogie67 Registered User Join Date: Mar 2005 Location: waco tx Posts: 584	Re: Parts off my or for my 72 F/S I'll take the door lock set.Mo ok? __________________ 77 swb starting all over again.

11-19-2006, 01:44 PM	#8
boogie67 Registered User Join Date: Mar 2005 Location: waco tx Posts: 584	Re: Parts off my or for my 72 F/S I see alfeefish already called the locks so put me in second on them.I'll take door handles let me know. __________________ 77 swb starting all over again.

11-19-2006, 01:51 PM	#9
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 494	Re: Parts off my or for my 72 F/S I'll take the pulley's...let me know shipping to 44401 and what method of payment you want. Thanks,Jim

11-19-2006, 02:43 PM	#10
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Parts off my or for my 72 F/S (Gas filler tube gasket brand new $2.00) Is this the cab/filler tube seal? If so, Ill take it...

11-19-2006, 04:41 PM	#11
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Parts off my or for my 72 F/S Pictures please of Blazer gas tank straps and hooks. Also picture of Front fender seal kit. Also method of payment. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

11-19-2006, 05:24 PM	#12
Kantosensei Registered User Join Date: Jun 2005 Location: Japan Posts: 87	Re: Parts off my or for my 72 F/S Can you send me pictures of the door latch controls and hood to cowl seal. Also, give me payment instructions and shipping to 96349. Thanks David

11-19-2006, 08:41 PM	#13
boogie67 Registered User Join Date: Mar 2005 Location: waco tx Posts: 584	Re: Parts off my or for my 72 F/S [I will do pay -pal apfeefish shipping for the blazer straps and the ign. and door lock set would be $5.48 ] I guess that leaves me out.Thanks anyway. __________________ 77 swb starting all over again.

11-19-2006, 08:48 PM	#14
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S 67 fleet a pic of the york compressor Attached Images __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-19-2006, 08:52 PM	#15
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Parts off my or for my 72 F/S I sent you a PM. Thank you...

11-19-2006, 09:16 PM	#16
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Parts off my or for my 72 F/S tphsmith - sorry I did not see I was 2nd on the blazer straps. If the fender seals are like the ones sold by GMCPaul and include the metal tabs thats great. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

11-19-2006, 10:03 PM	#17
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S Bob moore yes they have the metal clips with them Im trying to get pics posted __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-19-2006, 10:15 PM	#18
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S Kantosensei here are the pics of the door latchs and cowl to hood seal Attached Images __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-19-2006, 10:18 PM	#19
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S bob moore here are pics of the front fender seals Attached Images __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-19-2006, 11:16 PM	#20
Kantosensei Registered User Join Date: Jun 2005 Location: Japan Posts: 87	Re: Parts off my or for my 72 F/S I'll take the latches and hood to cowl seal. Please give me a shipping price to 96349 and your paypal info. This is a FPO AP military address, if you are not familiar I will send you an explanation.--Thanks David

11-19-2006, 11:49 PM	#21
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: Parts off my or for my 72 F/S Put me inline for the front fender seals. They are a complete set, (for both sides), correct? __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

11-20-2006, 12:39 AM	#22
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S 454_72__4x4 tis a brand new set I pulled them out of the bag to take the picture, your 2nd in line for the seals __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

11-20-2006, 01:25 AM	#23
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: Parts off my or for my 72 F/S Interested in sill plates, rear window rubber seal and front fender seals (if they are still available). Would like to see a pic of the sill plates if I could. Figure shipping to Idaho 83211 thanks Dave

11-20-2006, 10:16 AM	#24
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 270	Re: Parts off my or for my 72 F/S If you're for sure the driver side window regulator is for a 72, can you please post a pic? How much for shipping to 17520(PA)? Thanks

11-20-2006, 02:20 PM	#25
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Parts off my or for my 72 F/S 396muncie, is there a diffrence on the widow regulators from 67-72?. the regulator I have is off my 72 but the door was not a 72 door. so thats what I know about the regulator. if you still want to see a picture of it I can post one tonight __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

Register or Log In To remove these advertisements.