Video - The 1947 - Present Chevrolet & GMC Truck Message Board Network

st1x10 · 12-07-2006, 05:28 PM

I am looking for a video of some fast bags on a c10. If anybody has one or has seen one plz post it here. I am thinking about 1/2" valves and would like to know how fast they are. Thanks.

XXL · 12-07-2006, 07:53 PM

Not exactly what you're looking for, but...

(truck belongs to slammed67)

jimmydean · 12-07-2006, 10:38 PM

I don't have any video, but I can tell you my valves are so fast there is no adjustment when you hit the down switch. It dumps straight to the ground before the can close.

I got my dump adjusters to put on this weekend, should be cool.

gringoloco · 12-08-2006, 12:08 AM

Try this one of bskylerj's loud a$$ compressor
http://media.putfile.com/Air-ride87

And here's some of Alvin's on schraders
http://video.google.com/videoplay?do...24296738756458
http://video.google.com/videoplay?do...25243485406861
http://video.google.com/videoplay?do...30452979734497

gringoloco · 12-08-2006, 12:50 AM

Few more I found on google video:

This first guy I think shat himself-
http://video.google.com/videoplay?do...air+bags&hl=en

Really nice Blazer- Looks like it's having alittle trouble picking up the front- Don't know who it belongs to-
http://video.google.com/videoplay?do...air+bags&hl=en

Everyone needs a hobby, I guess-
http://video.google.com/videoplay?do...air+bags&hl=en

leftcoast66 · 12-08-2006, 04:25 AM

Quote:

Originally Posted by gringoloco

Few more I found on google video:

This first guy I think shat himself-
http://video.google.com/videoplay?do...air+bags&hl=en

Really nice Blazer- Looks like it's having alittle trouble picking up the front- Don't know who it belongs to-
http://video.google.com/videoplay?do...air+bags&hl=en

Everyone needs a hobby, I guess-
http://video.google.com/videoplay?do...air+bags&hl=en

That first video is from Totally polished.com. they used to have a huge video archive and that was one of them screwin around. They had some great stuff, too bad they got rid of the archives... Even had the pepsi commercial w/ the truck on hydraulics(They did the work) so was kinda cool as well as a bunch of trucks on bags and just overall crazy crap.

jimmydean · 12-08-2006, 01:21 PM

My truck is so much faster than those videos. I'm not kidding when I say my truck dumps like it's falling off a cliff.

st1x10 · 12-08-2006, 02:12 PM

Jimmy any way you can get a video cause those weren't really "fast" bags? Jimmy can you hop the truck?

jimmydean · 12-08-2006, 02:47 PM

If my tank is full and the truck is dumped, with nobody in the truck I do think the front wheels come up. I wouldn't call it a "hop", but it's fast. It's only if the tank is full though (7 gallons @160psi). Also, my valves are mounted about 3 feet from the bag they control, so the lines are also full.

When the back is done, I would bet you could hop it when it's empty. It scared me enough the first time that I called and ordered the adjusters minutes after.

I am using the Blitzluft valves, if that helps at all. Also, my whole setup from tank to bag is 1/2.

st1x10 · 12-08-2006, 06:59 PM

Another question for you jimmy. What engine do you have? Also do you have a 1 piece or a 2 piece driveshaft? I was looking into the Early Classic Crossmember and it looks sweet, but I am not looking forward to cutting the rivets out. Thanks for all the help. OO One more, where did you get all your fittings?

jimmydean · 12-08-2006, 08:39 PM

I have a mild 350 out of a '75 (that I was told was out of an early Camaro prior to rebuilding). It's a 2 peice drive line and my fittings are mostly Alkon. I have a compression tee fitting on the tank and 2 plastic tee unions. My hose routing is a bit different than others, but it's what worked for me.

I got my swivel 90's for the bags and the straight fittings for the valves off ebay from Koolcads. They shipped them wicked fast and the price was incredible. I got all my brass nipples at Ace Hardware and the rest I got from Suicide Doors.

If I was going to do it over again, I would have gotten everything from Suicide Doors and would have ran 3/8th. The smaller size would be easier to route and would be a lot more managable.

XXL · 12-09-2006, 02:57 PM

Quote:

Originally Posted by jimmydean

I got all my brass nipples at Ace Hardware and the rest I got from Suicide Doors.

hehe... he said 'brass nipples'

1LoC10 · 12-09-2006, 04:11 PM

http://www.youtube.com/watch?v=DzDR3__w_KY
http://www.youtube.com/watch?v=xC-z2PE3e7g

XXL · 12-09-2006, 07:00 PM

Quote:

Originally Posted by 1LoC10

http://www.youtube.com/watch?v=xC-z2PE3e7g

Next time someone's getting harassed by the cops "just because of what he drives" thank the S-10 driver in this link.

st1x10 · 12-09-2006, 07:04 PM

Quote:

Originally Posted by XXL

Next time someone's getting harassed by the cops "just because of what he drives" thank the S-10 driver in this link.

Yea what the heck was he thinking. Thanks this is more along the lines of what I was looking for. Poor video quality, but got some idea of it. Anybody know this guys setup???

camaro__thunder · 12-11-2006, 02:48 AM

That yellow C-10 is my buddy Shannons, it's a cover truck named BAD MEDICINE... Watch the second video Drag It

Here's a video of a truck thats pretty quick that likes to dance.

st1x10 · 12-11-2006, 02:14 PM

Quote:

Originally Posted by camaro__thunder

That yellow C-10 is my buddy Shannons, it's a cover truck named BAD MEDICINE... Watch the second video Drag It

Here's a video of a truck thats pretty quick that likes to dance.

Do you know what the yellow c10 has???

12-07-2006, 05:28 PM	#1
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Video I am looking for a video of some fast bags on a c10. If anybody has one or has seen one plz post it here. I am thinking about 1/2" valves and would like to know how fast they are. Thanks. __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

12-07-2006, 07:53 PM	#2
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: Video Not exactly what you're looking for, but... (truck belongs to slammed67) __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

12-07-2006, 10:38 PM	#3
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Video I don't have any video, but I can tell you my valves are so fast there is no adjustment when you hit the down switch. It dumps straight to the ground before the can close. I got my dump adjusters to put on this weekend, should be cool.

12-08-2006, 12:08 AM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Video Try this one of bskylerj's loud a$$ compressor http://media.putfile.com/Air-ride87 And here's some of Alvin's on schraders http://video.google.com/videoplay?do...24296738756458 http://video.google.com/videoplay?do...25243485406861 http://video.google.com/videoplay?do...30452979734497 __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-08-2006, 12:50 AM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Video Few more I found on google video: This first guy I think shat himself- http://video.google.com/videoplay?do...air+bags&hl=en Really nice Blazer- Looks like it's having alittle trouble picking up the front- Don't know who it belongs to- http://video.google.com/videoplay?do...air+bags&hl=en Everyone needs a hobby, I guess- http://video.google.com/videoplay?do...air+bags&hl=en __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-08-2006, 01:21 PM	#7
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Video My truck is so much faster than those videos. I'm not kidding when I say my truck dumps like it's falling off a cliff.

12-08-2006, 02:12 PM	#8
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Re: Video Jimmy any way you can get a video cause those weren't really "fast" bags? Jimmy can you hop the truck? __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6 Last edited by st1x10; 12-08-2006 at 02:15 PM.

12-08-2006, 02:47 PM	#9
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Video If my tank is full and the truck is dumped, with nobody in the truck I do think the front wheels come up. I wouldn't call it a "hop", but it's fast. It's only if the tank is full though (7 gallons @160psi). Also, my valves are mounted about 3 feet from the bag they control, so the lines are also full. When the back is done, I would bet you could hop it when it's empty. It scared me enough the first time that I called and ordered the adjusters minutes after. I am using the Blitzluft valves, if that helps at all. Also, my whole setup from tank to bag is 1/2.

12-08-2006, 06:59 PM	#10
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Re: Video Another question for you jimmy. What engine do you have? Also do you have a 1 piece or a 2 piece driveshaft? I was looking into the Early Classic Crossmember and it looks sweet, but I am not looking forward to cutting the rivets out. Thanks for all the help. OO One more, where did you get all your fittings? __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

12-08-2006, 08:39 PM	#11
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Video I have a mild 350 out of a '75 (that I was told was out of an early Camaro prior to rebuilding). It's a 2 peice drive line and my fittings are mostly Alkon. I have a compression tee fitting on the tank and 2 plastic tee unions. My hose routing is a bit different than others, but it's what worked for me. I got my swivel 90's for the bags and the straight fittings for the valves off ebay from Koolcads. They shipped them wicked fast and the price was incredible. I got all my brass nipples at Ace Hardware and the rest I got from Suicide Doors. If I was going to do it over again, I would have gotten everything from Suicide Doors and would have ran 3/8th. The smaller size would be easier to route and would be a lot more managable.

12-09-2006, 04:11 PM	#13
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Video http://www.youtube.com/watch?v=DzDR3__w_KY http://www.youtube.com/watch?v=xC-z2PE3e7g __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

12-11-2006, 02:48 AM	#16
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: Video That yellow C-10 is my buddy Shannons, it's a cover truck named BAD MEDICINE... Watch the second video Drag It Here's a video of a truck thats pretty quick that likes to dance. __________________ My Project 69 SWB SHAVED BAGGED DOORED Last edited by camaro__thunder; 12-11-2006 at 02:51 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.