|
12-25-2006, 12:12 AM | #1 |
Registered User
Join Date: Feb 2006
Location: kelso,wa
Posts: 55
|
camaro,s-10 rearend?
I just wanted to hear some info on putting one of these rearends in our trucks.where to buy trailing arm perches?are the s-10 rearends 5x5 bolt pattern ect.anything you guy's got.the reason I'm wanting to do this is to get more offset on my wheel.thanks
|
12-25-2006, 12:26 AM | #2 |
Registered User
Join Date: Mar 2006
Location: Milford, MI
Posts: 148
|
Re: camaro,s-10 rearend?
s10's are 5x4.75, sam as camro, chevelles,etc... most s10 are just 7.5" rears thouh which aren't that strong.
__________________
Meticulous Fabrications Milford Michigan |
12-25-2006, 01:36 AM | #3 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: camaro,s-10 rearend?
You'd be better off with a '73+ rear end. They are only 10 bolt, but they are cheap and you can get one anywhere. If you want a disc rear, find a late model Caprice or Impala rear.
|
12-25-2006, 02:05 AM | #4 |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: camaro,s-10 rearend?
The S-10 4x4 blazers 2000 and newer had the option of 8.8" ring gear and limited slip... not to mention discs. They are however 5x4.75 bolt pattern as previously mentioned. The 4x4 rear is a bit narrower than the 2WD. Buy the perches from ECE.
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
12-25-2006, 01:25 PM | #5 |
Registered User
Join Date: Feb 2006
Location: kelso,wa
Posts: 55
|
Re: camaro,s-10 rearend?
thanks guy's!
|
Bookmarks |
|
|