Show Me The Exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MR MAGOO · 01-30-2007, 08:14 AM

Show Me All The Exhaust Options Out There And How Much Was Spent On It. Please

**Yukon Jack** · 01-30-2007, 10:41 AM

On my 69 K20 I have Dynomax ceramacoated headers on the bbc that cost about $210 a couple years ago.

They exit into 3" pipe that then goes to a crossover that is 3" inlet, 2 1/2" outlet.

I got it built by a guy off of e-bay for like $30 or so.

From there it is 2 1/2" pipe going to Dynomax Ultra Flo mufflers that were like $80 after rebates.

Then a straight shot back

Dumping right before the receiver hitch under the flatbed

The bending and pipe cost about $300 from a local muffler shop.

**Captkaos** · 01-30-2007, 05:39 PM

Quote:

Originally Posted by MR MAGOO

Show Me All The Exhaust Options Out There And How Much Was Spent On It. Please

01-30-2007, 08:14 AM	#1
MR MAGOO Registered User Join Date: Jan 2007 Location: minden la Posts: 80	Show Me The Exhaust Show Me All The Exhaust Options Out There And How Much Was Spent On It. Please

01-30-2007, 10:41 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Show Me The Exhaust On my 69 K20 I have Dynomax ceramacoated headers on the bbc that cost about $210 a couple years ago. They exit into 3" pipe that then goes to a crossover that is 3" inlet, 2 1/2" outlet. I got it built by a guy off of e-bay for like $30 or so. From there it is 2 1/2" pipe going to Dynomax Ultra Flo mufflers that were like $80 after rebates. Then a straight shot back Dumping right before the receiver hitch under the flatbed The bending and pipe cost about $300 from a local muffler shop. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.