Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-06-2007, 04:16 PM | #1 |
Account Suspended
Join Date: Nov 2002
Location: Winnipeg, Manitoba, Canada
Posts: 798
|
Tire Decision and Speedo Calibration
Okay, so I think I've made a decision about new tires for the truck...
I will likely be buying a new set of BFG All-Terrain T/A tires for our Pathfinder. The current set is only 4 years old and they still have a fair amount of tread left (I have not measured it yet). The plan is to recycle the "used" tires onto the 8" wide rally wheels on the truck - since it is not a daily driver, I anticipate the BFG's will still last me a number of years. The BFG's are 31x10.5 R15 So the questions are... * I assume the truck wheel wells should accomodate the slightly larger diameter tire? The truck actually has the heavy-half (camper special) suspension system, so it has slightly higher ground clearance than the standard C-10. * Since the overall diameter of the BFG's is slightly larger than the P265/75 R15 currently on the truck, my speedo/odo will be slightly out. Should I look at changing the gear head on the tranny end? If so, what size would I be looking for? Any help/comments would be appreciated. Thanks Guys (and Gals). |
03-06-2007, 04:53 PM | #2 |
Account Suspended
Join Date: Nov 2002
Location: Winnipeg, Manitoba, Canada
Posts: 798
|
Re: Tire Decision and Speedo Calibration
OK, so I did a little looking around, and it seems a 265/75 R15 is only about 1/2" smaller in diameter - 30.6" vs. 31". This results in about 2" (or 2%) difference in overall circumference of the tire.
So, I'm guessing I really have nothing to be concerned about here? |
03-07-2007, 12:28 AM | #3 |
Registered User
Join Date: Jul 2003
Location: Franklin, NE
Posts: 387
|
Re: Tire Decision and Speedo Calibration
They will fit. My 78 k-10 was came from the factory with 10.5 x 31. I actually did the opposite of what everyone does and went to 235/75, I found that it handled better, it both the rain and snow.
|
03-08-2007, 01:04 PM | #4 |
Account Suspended
Join Date: Nov 2002
Location: Winnipeg, Manitoba, Canada
Posts: 798
|
Re: Tire Decision and Speedo Calibration
So I took a little closer look at the BFG's I want to transplant onto the truck. According to the BFG information, the All-Terrain T/A starts off with 16/32" (1/2") of tread depth. I measured the remaining tread yesterday and it looks like right around 12/32" (3/8") left. So I feel pretty confident in putting these babies on the truck and getting a number of years out of them yet.
And of course White Letters Out!!! |
03-09-2007, 08:06 PM | #5 |
Account Suspended
Join Date: Nov 2002
Location: Winnipeg, Manitoba, Canada
Posts: 798
|
Re: Tire Decision and Speedo Calibration
OK - now I feel like an idiot.
I took another look at my truck tires and it seems I've been running 235/75, NOT 265/75. So the 31x10.5 will definitely be bigger, but they should still fit right? |
03-11-2007, 09:38 AM | #6 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,223
|
Re: Tire Decision and Speedo Calibration
They should fit, and the 31s are about 1.5" taller. Your speedo will be around 5 MPH off at 60 (you'll be doing 65 when speedo say 60). I had a set on my 82 2wd for a while and hand no clearance issues. They work great on 8" ralleys.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 03-11-2007 at 09:38 AM. |
03-11-2007, 10:03 AM | #7 |
Account Suspended
Join Date: Nov 2002
Location: Winnipeg, Manitoba, Canada
Posts: 798
|
Re: Tire Decision and Speedo Calibration
Yeah they actually fit great - no clearance issues.
A little dirty, but... |
Bookmarks |
|
|