|
|
|
03-08-2007, 12:15 AM
|
#1 |
|
Registered User
Join Date: Jan 2007
Location: Bellingham, washington
Posts: 260
|
205 transfercase yoke
I swaped in a 14 bolt rear in place of the old 12 bolt
 and of course the 14 bolt has the bigger stronger u-joint. Problem is the out put yoke on the back of my 205 t-case is the small u-joint yoke from the old 12 bolt rear. Right now I have a transition type u- joint on front of the driveshaft but obviously it is the weak spot in the driveline. I'm sure I can get the bigger u-joint yoke for the back of the t-case but doe's anyone know who I could get it from or a part #.Thanks
__________________
68 4x4, 454, 4 speed, disk brakes both ends, Sold my 69 SS396 Elcamino when young & stupid 
|
|
|
|
03-08-2007, 01:30 PM
|
#2 |
|
Member #1049
Join Date: Jun 2000
Location: Troy Montana
Posts: 3,940
|
Re: 205 transfercase yoke
I am not sure of a part number.. But I do know that the 205's out of the 3/4 tons have a larger u-joint flange than the 1/2 tons.. I may have one at the shop.. I will look today and compare
|
|
|
|
|
03-08-2007, 01:51 PM
|
#3 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,688
|
Re: 205 transfercase yoke
spicer number is a 3-4-6211. 32 spline--1350 u-joint
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
