|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-18-2007, 10:08 AM
|
#1 |
|
Lowered in Cleveland
Join Date: Feb 2006
Location: Cleveland
Posts: 120
|
speedometer not working
my speedometer has not worked since i bought my truck, so i purchased a new speedo cable and a redone gauge cluster for my 66. so the only thing left is the tranny output. never had to deal with this problem so need some teaching. i only know that there is one bolt holding the gear onto the tranny shaft. so any help is good help.
|
|
|
|
03-18-2007, 11:09 AM
|
#2 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: speedometer not working
What tranny you have?
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
03-18-2007, 11:17 AM
|
#3 |
|
Registered User
 
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: speedometer not working
If it is a three speed the gear is on the left hand side, folloe the cable and you will see were it attaches to the tranny. Unscrew it and remove the lock plate, it is held on with a screw ( 3/8 I think ). You will need to coax it off, I use a screw driver and place it were the locin plate was an gentaly pry it loose.
When I replaced my cable I found that the cable had broke off right at the tip. It is an easy fix. Good luck |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
