|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-19-2007, 09:26 PM
|
#1 |
|
Account Suspended
Join Date: Jan 2007
Location: lennon, michigan
Posts: 162
|
Finally, going to 454 BBC!!!!!!! (pics)
Well fella's it's finally warm enough in Michigan to start playin' again. I got my 72 Jimmy outta the pole barn last weekend and yanked out the 350. Gettin ready to squeeze in a built 454 BBC this weekend. Recipe says should be snortin' 500 hp. Time will tell...
Those are Hedman block huggers 2" primary Used a Milodon oil pan, 1" clearance of stock cross member--definate bonus |
|
|
|
03-19-2007, 09:57 PM
|
#2 |
|
Can't wait to retire!!
Join Date: Feb 2003
Location: Corunna, MI
Posts: 1,575
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Sweeet!!
Bring it by when you get it running.
__________________
 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 |
|
|
|
|
03-19-2007, 11:45 PM
|
#3 |
|
Senior Member
Join Date: Oct 2006
Location: central jersey
Posts: 763
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
nice!!
__________________
69 4wd V6 20k orig miles!!  05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com |
|
|
|
|
03-20-2007, 06:16 AM
|
#4 |
|
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,537
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Sounds crazy but seeing that uber clean firewall just screams
NICE JIMMY!!   You've done your home work on the big block install, congrats. Looks like it going to fit really well, keep the pics coming. Last edited by vtblazer; 03-20-2007 at 06:17 AM. |
|
|
|
|
03-20-2007, 10:00 AM
|
#5 |
|
Registered User
 
Join Date: May 2006
Location: Wyman, Kentucky
Posts: 403
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Those tall valve covers may pose a problem for you without a body lift , I had to use shorter covers on mine. Sure is a nice looking Jimmy.
__________________
1972 GMC Jimmy, 4WD, 454 CI, 350 Turbo, 4" lift, 35" tires The math teacher said my son "Bubba" could be a mathmatical genius. cause he's got 13 fingers! |
|
|
|
|
03-20-2007, 10:03 AM
|
#6 |
|
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Lookin good - keep us posted and take lots of pics!
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
|
|
|
|
03-20-2007, 10:51 AM
|
#7 |
|
Future TOTM Winner
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
I love the headers! I always pictured something similar for myself it I ever purchase a rat motor.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com |
|
|
|
|
03-20-2007, 11:26 AM
|
#8 |
|
Registered User
Join Date: Feb 2000
Location: Modesto, CA
Posts: 1,842
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
YYYYYYYYYYEEEEEEEEEHHHHHHHHHHHHHHHHAAAAAAAAAAAAABBC!
hahahah I too said WOW nice firewall..errr Jimmy hahhaa That is a clean lookin rig! You will love BBC POWER 
__________________
1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks
|
|
|
|
|
03-20-2007, 01:20 PM
|
#9 |
|
Account Suspended
Join Date: Jan 2007
Location: lennon, michigan
Posts: 162
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Thanks for all the props fellas!!! I tried to do my homework before this all started. The Milodon oil pan was a life saver. I didn't want to have to move everything forward like RustyParts had too. Hey Critter, those headers are Hedman # 68516 Tight Tubes through Summit, They should clear the frame rail on the drivers side where others have had problems.
As far as firewall clearance, weeeelllllll I might touch on the pass. side. To close to tell with out test fitting first. I think the crankcase breather will have to go. I hate to beat-up my firewall, but I think that's gonna happen before I move tranny and motor forward, or even before I scrap my pretty valve covers. haha Gotta fly, I'll post some new pics this weekend. I HOPE. Joe |
|
|
|
|
03-20-2007, 02:18 PM
|
#10 |
|
River life......
Join Date: Oct 2005
Location: Soldotna AK
Posts: 1,078
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
SWEET Jimmy! Hope to see the progress pics.
__________________
|
|
|
|
|
03-20-2007, 02:24 PM
|
#11 |
|
Registered User
Join Date: Feb 2000
Location: Modesto, CA
Posts: 1,842
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Hey Joe ~ Just a FYI, I had to Bang Bang on my driver's side firewall more than the pass side. The spot I had to dent in was just to the left of the clutchrod hole on the firewall. The pass side was just a little dent. Oh I do have a 3"bodylift too so...
Anyway good luck and keep us posted
__________________
1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks
|
|
|
|
|
03-24-2007, 08:25 AM
|
#12 |
|
Senior Member
Join Date: Nov 2005
Location: AL
Posts: 2,517
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Mine didn't hit the firewall but it hit the booster. It is a 2wd but I guess this would be the same.
|
|
|
|
|
03-24-2007, 09:31 AM
|
#13 |
|
Account Suspended
Join Date: Jan 2007
Location: lennon, michigan
Posts: 162
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Well, I got it in there!!! It was definately ALOT tighter than I figured. RustyParts was right!! My valve covers were a pan in the butt. I took my original firewall and beat the livin S#%T out of it. Now I have to hook everything back up and wire in a electric fuel pump. Hope to have it runnin in a week or so. I'll try to get some pics soon.
|
|
|
|
|
03-24-2007, 10:10 AM
|
#14 |
|
Registered User
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
My son (orangeuavol) and I used the small block stands and mounts on his BB Blazer. With the covers we used we cut holes in the firewall and boxed them in. Did not interfer with anything on inside. Used stock exhaust manifolds which cleared stands and frame. HEI would not clear firewall so we took a point dist. and added a Pertonix system and a MSD cap that takes HEI style wires. Valve cover cleared booster easy.
__________________
56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer |
|
|
|
|
03-24-2007, 07:36 PM
|
#15 |
|
Account Suspended
Join Date: Jan 2007
Location: lennon, michigan
Posts: 162
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Wow!! JHow your sons blazer looks really nice!! I did everything about the same, but i used Edelbrock tall covers. These are causing my nightmare to begin, I used smallblock mounts and crossmember, Milodon oil pan plenty of room. I have a MSD Billet dist. fits close. I have Hedman block huggers, needed a little shave here and there. I haven't put the brake booster back on yet, looks like it could be a problem. Thanks for the input, I can use any advice, I'm definately NOT a master mechanic.
|
|
|
|
|
03-24-2007, 09:39 PM
|
#16 | |
|
Registered User
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
Quote:
__________________
56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer |
|
|
|
|
|
03-24-2007, 07:57 PM
|
#17 |
|
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: Finally, going to 454 BBC!!!!!!! (pics)
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
