Cut your beat-up bed 4 marker? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sighlurr · 03-28-2007, 03:47 PM

I'm trying to change a '67 fender to a '68-'72. Does anyone have a crappy driver's side bedside, can be long or short, they are willing to cut up to get me the piece below?

Thanks!

Bamm · 03-28-2007, 03:49 PM

Wow, don't see many guys going the other way on this.

I wish you were closer I would just straight trade you a nice 68 fender for a nice 67, save me the trouble of shaving the marker light off.

Good Luck..........Jerry

sighlurr · 03-28-2007, 03:51 PM

I know, it's not normal. But this truck is so clean, I want to keep as much stock as I can.

**JDL** · 03-28-2007, 06:38 PM

is that your bed look like you might need the corner to? I might have a good one for you. I will get a pic after while.

sighlurr · 03-28-2007, 07:12 PM

No, this isn't mine. This is from a yard I was at earlier this year. I just need the marker.

Devin

**JDL** · 03-28-2007, 07:34 PM

sighlurr · 03-28-2007, 08:36 PM

JDL,

Are there some dimples above the marker? I see 5 dots, are those poking out and will need to be straightened out?

If this is striaght, what do you want for this piece?

Devin

**JDL** · 03-28-2007, 10:02 PM

It could be rust coming through. I will cut it out and check. And let you know.

**JDL** · 03-29-2007, 09:11 PM

OK they are just chips in the pant. how about $10 plus shipping. I cut out plenty so you can get it placed right.

sighlurr · 03-30-2007, 12:38 AM

Sounds good to me. Can I PayPal you, or do you need me to send you a check?

Devin

sighlurr · 03-31-2007, 10:04 PM

JDL is sending me this section, I think I'm set.

03-28-2007, 03:47 PM	#1
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Cut your bed 4 marker? I'm trying to change a '67 fender to a '68-'72. Does anyone have a crappy driver's side bedside, can be long or short, they are willing to cut up to get me the piece below? Thanks! Attached Images Last edited by sighlurr; 03-28-2007 at 03:51 PM.

03-28-2007, 03:49 PM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: Cut your beat-up bed 4 marker? Wow, don't see many guys going the other way on this. I wish you were closer I would just straight trade you a nice 68 fender for a nice 67, save me the trouble of shaving the marker light off. Good Luck..........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

03-28-2007, 03:51 PM	#3
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: Cut your beat-up bed 4 marker? I know, it's not normal. But this truck is so clean, I want to keep as much stock as I can.

03-28-2007, 06:38 PM	#4
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,886	Re: Cut your beat-up bed 4 marker? is that your bed look like you might need the corner to? I might have a good one for you. I will get a pic after while. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

03-28-2007, 07:12 PM	#5
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: Cut your beat-up bed 4 marker? No, this isn't mine. This is from a yard I was at earlier this year. I just need the marker. Devin

03-28-2007, 07:34 PM	#6
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,886	Re: Cut your beat-up bed 4 marker? __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

03-28-2007, 08:36 PM	#7
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: Cut your beat-up bed 4 marker? JDL, Are there some dimples above the marker? I see 5 dots, are those poking out and will need to be straightened out? If this is striaght, what do you want for this piece? Devin

03-28-2007, 10:02 PM	#8
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,886	Re: Cut your beat-up bed 4 marker? It could be rust coming through. I will cut it out and check. And let you know. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa Last edited by JDL; 03-28-2007 at 10:02 PM.

03-29-2007, 09:11 PM	#9
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,886	Re: Cut your beat-up bed 4 marker? OK they are just chips in the pant. how about $10 plus shipping. I cut out plenty so you can get it placed right. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

03-30-2007, 12:38 AM	#10
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: Cut your beat-up bed 4 marker? Sounds good to me. Can I PayPal you, or do you need me to send you a check? Devin

03-31-2007, 10:04 PM	#11
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: Cut your beat-up bed 4 marker? JDL is sending me this section, I think I'm set.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.