Help, Point Me In The Right Direction - The 1947 - Present Chevrolet & GMC Truck Message Board Network

timzrides · 05-03-2007, 10:37 PM

i just purchase a 47-53 cab and frame. the frame is a 48 with a 79 camaro front subframe but welded and boxed to the old 48. how can i get this thing LOW with regular suspension. if i go the bag route, do they sell something without going tubular. the rear end is an s10 posi with 3" blocks, any ideas or pictures.. thanks

1-ton of fun · 05-04-2007, 11:40 AM

use drop springs for the front and rear if you don't want to use bags.

also there is a coil-over kit out now that bolts up to the stock 79 suspension that would allow you to set the height exactly where you wanted it

05-03-2007, 10:37 PM	#1
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	Help, Point Me In The Right Direction i just purchase a 47-53 cab and frame. the frame is a 48 with a 79 camaro front subframe but welded and boxed to the old 48. how can i get this thing LOW with regular suspension. if i go the bag route, do they sell something without going tubular. the rear end is an s10 posi with 3" blocks, any ideas or pictures.. thanks

05-04-2007, 11:40 AM	#2
1-ton of fun polishing a turd Join Date: Dec 2004 Location: houston, tx Posts: 674	Re: Help, Point Me In The Right Direction use drop springs for the front and rear if you don't want to use bags. also there is a coil-over kit out now that bolts up to the stock 79 suspension that would allow you to set the height exactly where you wanted it __________________ 59 chevy apache 31 4x4 - my project: http://67-72chevytrucks.com/vboard/s....php?p=8668512 53 buick special - straight 8 sled - blow through turbo 47 gmc - flatbed hot rod build 99 ford econoline e350 - 4x4 converted family roadtrip/overlanding rig AKA 'Monstervan' AKA 'Daddy-Van'



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.