Three little letters are making me fell dumb...PCV - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Moneypit · 05-06-2007, 11:17 PM

I know all about what a PCV system is for and for the most part how it works, and until today I thought I knew how one was supposed to be hooked up. What has me stumped is when looking through the installation manual for my Edelbrock 1406 carb it shows the 3/8 inlet on the front of the carb as being for the PCV. I have never came across a PCV system that was hooked through the carb. All I've ever seen was a PCV valve on top of the valve cover and connected to the bottom side of the air cleaner. So can anyone tell me what the inlet on the front of the carb is for and how it is supposed to be hooked up.

In case anyone is wondering here is a link that shows the inlet on the carb (you have to scroll down a bit):
http://www.edelbrock.com/automotive_.../1000/1406.pdf

Ilike 72"s · 05-06-2007, 11:25 PM

Mine is on the back of the carb, but its a holley. All the PVC needs is a vacume port to pull the crankcase excess pressure and or smoke out of the block.

woodridge · 05-06-2007, 11:27 PM

The pipe that hooks to the air cleaner is for the fresh air drawn into the crankcase. The PCV valve has to be connected to a vacume source i.e. bottom of carb to work.

EAST SIDE LOW LIFE · 05-07-2007, 02:19 AM

This picture show's my PVC connected to a carb adaptor plate using a port on the adaptor plate as a vacuum source. There are area's as well at the back of the intake where you can use various fittings that allow one a source of vacuum.

I'm using a Edelbrock Performer Intake & a Holley carb.

esll.

GREASEMONKEY72 · 05-07-2007, 03:21 AM

the pcv hooks up to the port on the bottom of the front of the carb and the brakebooster line hooks up to the port on the bottom of the back of the carb(stock quadrajet and intake)

RustyParts · 05-07-2007, 08:59 AM

I'm using an Edelbrock, took off air cleaner so you can see PCV.

bryanw1968 · 05-07-2007, 02:45 PM

Quote:

Originally Posted by EAST SIDE LOW LIFE

This picture show's my PVC connected to a carb adaptor plate using a port on the adaptor plate as a vacuum source. There are area's as well at the back of the intake where you can use various fittings that allow one a source of vacuum.

I'm using a Edelbrock Performer Intake & a Holley carb.

esll.

Clean motor. I like it!

Moneypit · 05-07-2007, 02:13 PM

Ok but if I have the PCV valve in one valve cover, and the PCV Breather in the other valve cover, where do i put my oil in? I only have one hole in each valve cover. Would I have to take out the PCV valve and put oil in through there?

LOL! I just realized I put 'fell' instead of 'feel'. Now I really feel dumb!!

sneakysnake · 05-07-2007, 02:20 PM

Pour your oil in the PCV breather hole

67Fleet · 05-07-2007, 03:03 PM

Now I gotta go check mine and make sure it's routed correctly..... Thanks for the pics guys!

05-06-2007, 11:17 PM	#1
Moneypit Registered User Join Date: Nov 2006 Location: Alpine,Texas Posts: 129	Three little letters are making me fell dumb...PCV I know all about what a PCV system is for and for the most part how it works, and until today I thought I knew how one was supposed to be hooked up. What has me stumped is when looking through the installation manual for my Edelbrock 1406 carb it shows the 3/8 inlet on the front of the carb as being for the PCV. I have never came across a PCV system that was hooked through the carb. All I've ever seen was a PCV valve on top of the valve cover and connected to the bottom side of the air cleaner. So can anyone tell me what the inlet on the front of the carb is for and how it is supposed to be hooked up. In case anyone is wondering here is a link that shows the inlet on the carb (you have to scroll down a bit): http://www.edelbrock.com/automotive_.../1000/1406.pdf __________________ 1968 Chevy C10 1967 Mustang 1976 Honda XL350 2006 Victory Vegas 8-Ball 2012 Ram 1500 4x4

05-06-2007, 11:25 PM	#2
Ilike 72"s Registered User Join Date: Jan 2007 Location: eastern oregon Posts: 623	Re: Three little letters are making me fell dumb...PCV Mine is on the back of the carb, but its a holley. All the PVC needs is a vacume port to pull the crankcase excess pressure and or smoke out of the block.

05-06-2007, 11:27 PM	#3
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Three little letters are making me fell dumb...PCV The pipe that hooks to the air cleaner is for the fresh air drawn into the crankcase. The PCV valve has to be connected to a vacume source i.e. bottom of carb to work. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

05-07-2007, 02:19 AM	#4
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: Three little letters are making me fell dumb...PCV This picture show's my PVC connected to a carb adaptor plate using a port on the adaptor plate as a vacuum source. There are area's as well at the back of the intake where you can use various fittings that allow one a source of vacuum. I'm using a Edelbrock Performer Intake & a Holley carb. esll. Attached Images __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member)

05-07-2007, 03:21 AM	#5
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Three little letters are making me fell dumb...PCV the pcv hooks up to the port on the bottom of the front of the carb and the brakebooster line hooks up to the port on the bottom of the back of the carb(stock quadrajet and intake) Attached Images __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

05-07-2007, 08:59 AM	#6
RustyParts Registered User Join Date: May 2006 Location: Wyman, Kentucky Posts: 403	Re: Three little letters are making me fell dumb...PCV I'm using an Edelbrock, took off air cleaner so you can see PCV. Attached Images __________________ 1972 GMC Jimmy, 4WD, 454 CI, 350 Turbo, 4" lift, 35" tires The math teacher said my son "Bubba" could be a mathmatical genius. cause he's got 13 fingers!

05-07-2007, 02:13 PM	#8
Moneypit Registered User Join Date: Nov 2006 Location: Alpine,Texas Posts: 129	Re: Three little letters are making me fell dumb...PCV Ok but if I have the PCV valve in one valve cover, and the PCV Breather in the other valve cover, where do i put my oil in? I only have one hole in each valve cover. Would I have to take out the PCV valve and put oil in through there? LOL! I just realized I put 'fell' instead of 'feel'. Now I really feel dumb!! __________________ 1968 Chevy C10 1967 Mustang 1976 Honda XL350 2006 Victory Vegas 8-Ball 2012 Ram 1500 4x4 Last edited by Moneypit; 05-07-2007 at 02:15 PM.

05-07-2007, 02:20 PM	#9
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Three little letters are making me fell dumb...PCV Pour your oil in the PCV breather hole

05-07-2007, 03:03 PM	#10
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: Three little letters are making me fell dumb...PCV Now I gotta go check mine and make sure it's routed correctly..... Thanks for the pics guys! __________________ -Bret 67 short-fleet sold!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.