Did they make 3/4 ton 4x4 crew cabs? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BBC Beater · 05-30-2007, 10:42 PM

Someone told me they only came in 1 ton. I'm looking at a mid 80's crew cab 4x4 SRW to part and want to know what it is before I approach the guy.

What is an easy way to identify it as a 1 ton or 3/4 ton? The fender tags are missing.

Thanks for any help!

1969k10stepside · 05-30-2007, 10:44 PM

The front axle...It will be a Dana 60 if its a 1 ton.3/4 will be a 10 bolt.I'v seen a crew cab with a dana 44.But I dont think it was the right one.Someone just took the good axle out and put in the dana 44.There might have been 3/4 ton Crew Cabs.I don't know for sure

BBC Beater · 05-30-2007, 10:47 PM

Thanks, and yeah the only valuable part to it would be the dana 60 axle, it's pretty beat up.

BBC Beater · 05-30-2007, 10:56 PM

Oh, and I don't know how to identify the axle... I've also heard by the mid 80's 3/4 tons were using 10 bolt axles.

1969k10stepside · 05-30-2007, 11:02 PM

The axle will have 60 on the lower drivers side corner by the diff cover.
And you are right.They did have 10 bolts on the 1/2 (3/4 ton too?).It's late...I miss typed.Look in the 4wd section.There is pics of Dana 60s

jeffspower · 05-30-2007, 11:15 PM

A typical older 60 has kingpin bearings instead of ball joints. Easily identified by the 4- bolt covers instead of a single nut on a ball joint.

05-30-2007, 10:42 PM	#1
BBC Beater Registered User Join Date: Oct 2005 Location: Houston Posts: 57	Did they make 3/4 ton 4x4 crew cabs? Someone told me they only came in 1 ton. I'm looking at a mid 80's crew cab 4x4 SRW to part and want to know what it is before I approach the guy. What is an easy way to identify it as a 1 ton or 3/4 ton? The fender tags are missing. Thanks for any help! Last edited by BBC Beater; 05-30-2007 at 10:42 PM.

05-30-2007, 10:44 PM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: Did they make 3/4 ton 4x4 crew cabs? The front axle...It will be a Dana 60 if its a 1 ton.3/4 will be a 10 bolt.I'v seen a crew cab with a dana 44.But I dont think it was the right one.Someone just took the good axle out and put in the dana 44.There might have been 3/4 ton Crew Cabs.I don't know for sure Last edited by 1969k10stepside; 05-30-2007 at 11:01 PM. Reason: fixed wording---its late

05-30-2007, 10:47 PM	#3
BBC Beater Registered User Join Date: Oct 2005 Location: Houston Posts: 57	Re: Did they make 3/4 ton 4x4 crew cabs? Thanks, and yeah the only valuable part to it would be the dana 60 axle, it's pretty beat up.

05-30-2007, 10:56 PM	#4
BBC Beater Registered User Join Date: Oct 2005 Location: Houston Posts: 57	Re: Did they make 3/4 ton 4x4 crew cabs? Oh, and I don't know how to identify the axle... I've also heard by the mid 80's 3/4 tons were using 10 bolt axles.

05-30-2007, 11:02 PM	#5
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: Did they make 3/4 ton 4x4 crew cabs? The axle will have 60 on the lower drivers side corner by the diff cover. And you are right.They did have 10 bolts on the 1/2 (3/4 ton too?).It's late...I miss typed.Look in the 4wd section.There is pics of Dana 60s Last edited by 1969k10stepside; 05-30-2007 at 11:03 PM.

05-30-2007, 11:15 PM	#6
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Did they make 3/4 ton 4x4 crew cabs? A typical older 60 has kingpin bearings instead of ball joints. Easily identified by the 4- bolt covers instead of a single nut on a ball joint. Attached Images __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.