Lil Help If Possible - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pat66 · 07-01-2007, 04:15 PM

Am swapping motor/trans in my 66.Have upgraded from 283 3sp manual to a 350 700r4.Also added PS and air.1st ,is the dust cover for the torq converter the same as a 350?
Pulleys? Serpintine seems to be the thing,but cash is the guiding factor.
Can someone recomend a v-belt system?3v on crank? 2 on water pump? single on ps and air compressor???
Any help would be apreciated
Thanks Pat

Jonboy · 07-01-2007, 07:54 PM

The dust cover is the same.

I don't know about the pulleys. I would try to scrounge a serpentine setup from a junkyard, but that's just me. Pretty much anything 90-up will have a serp setup, and everything can probably be had for around $100.

07-01-2007, 04:15 PM	#1
pat66 Registered User Join Date: Apr 2007 Location: antioch tn Posts: 71	Lil Help If Possible Am swapping motor/trans in my 66.Have upgraded from 283 3sp manual to a 350 700r4.Also added PS and air.1st ,is the dust cover for the torq converter the same as a 350? Pulleys? Serpintine seems to be the thing,but cash is the guiding factor. Can someone recomend a v-belt system?3v on crank? 2 on water pump? single on ps and air compressor??? Any help would be apreciated Thanks Pat __________________ 02 Blazer 66 lwb step 66 lwb feet :flagw Working to live not living to work RIP RS

07-01-2007, 07:54 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Lil Help If Possible The dust cover is the same. I don't know about the pulleys. I would try to scrounge a serpentine setup from a junkyard, but that's just me. Pretty much anything 90-up will have a serp setup, and everything can probably be had for around $100.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.