Gm 363? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotty101 · 07-28-2007, 01:44 PM

We have recently pulled a 363 engine out of an old straight truck and i was wonderin if this engine is worth anything or should it just be scrapped? it has a holley carb on it. Just wondering thanks

MylilBowTie · 07-28-2007, 03:32 PM

Ive never heard of a 363? What is it?

C&C Chevy · 07-28-2007, 05:04 PM

http://www.73-87.com/7387info/engineid.htm

This might help ID the engine better..

Yankeelights · 07-28-2007, 06:09 PM

Got any PICs of this engine?

scotty101 · 07-29-2007, 08:49 AM

I will try get some up today or tomorrow.

ont_guy_38 · 07-29-2007, 09:19 AM

They were 366 cubic inches and is it worth anything?.Probably not to the average person but you never know till you advertise it for sale

ChaseDale3and8 · 07-29-2007, 10:32 AM

Those were a big block that were used in the C-60 dump trucks and in school buses I believe. I don't think that they are really worth a whole lot but somebody out there might want it so I'd advertise it for sale and see if anybody wants it before I'd scrap it. ...Joe

scotty101 · 07-29-2007, 03:18 PM

yeah it is a 366 not a 363 sorry for the confusion i ment to ask along time ago but never got around to it and now i had a mental lasps on the last number. but that is what i was wondering. thanks and this engine came out of a old feed truck. so what about a holley carb off of it do they fit on a 350? of 305 or are they different bolt patterns? here are some pics

MylilBowTie · 07-29-2007, 03:47 PM

The carb will bolt up. Depending on what type of intake you have you may need an adapter. The distributor, air cleaner assy, alternator will also work. May have to remove the pulley on the alternator if you don't have a serpentine pulley setup. Some of the later 85-87? years had a serpentine and v-belt.

Pyrotechnic · 07-29-2007, 04:40 PM

Thats a Target Master so it's obviously been rebuilt.

The 366 was a tall deck, small bore big block. It's bigger brother, the 427T was a 427 with a tall deck, which made it popular with racers because you could get larger displacements without paying big bucks for a tall deck aftermarket block. The 366 isn't really valued though because the bore is too small for performance purposes. The bore is smaller than that or a small block 350.

It IS a very strong motor though. The pistons have an extra ring for durability because they were designed for the C60 medium duty trucks. It's a very low revving motor. The valves float at around 4000 RPM. Tons of torque though

If you got it and it's a good running motor with lots of life left, I say run it. It'll be perfect for pushing a highway gears like 3.08's down the road since it's got so much torque. Would be good for towing too. If it's a low miles motor, then it's going to last you a LONG time.

scotty101 · 07-29-2007, 04:57 PM

would a double stack air filter like that fit on a 350 or is that a pointess swap? vs. the stock air intake. thanks for the info on it, it is very intrestin and helpful i dont know alot about engines yet so i am trying to learn as much as i can

scotto0609 · 07-29-2007, 08:57 PM

I have a 366 in my dually and it runs nice. Nice low end torque but runs outta steam after 3500 rpm. It ctually runs so nice that I dont want to take it out and fix the rear main seal,so I constantly put oil in it!

liljon285 · 07-29-2007, 09:13 PM

So is it diesel or gas...if its gas then its a bbc right? I wouldnt mind building one...get a lot of unique rep. out of it!

78chev · 07-29-2007, 09:28 PM

Distributer means gas, right?

dswancutt · 07-29-2007, 09:40 PM

Sounds like you live in farm country, so if it is a good running motor and doesn't use oil, should be easy to get rid of as there are a lot of Chevy and GMC trucks that are used as farm truck. Just need to advertise it where farmers and such can see it if you want to get rid of it.

liljon285 · 07-29-2007, 09:43 PM

Oh wow it was right there lol im blind! So is it considered a big block or small?

liljon285 · 07-29-2007, 09:55 PM

oh OK it is a big block wow thats small...i would like to buy it and build it but !. i dont have the money lol and @. from eerybodys comments it dont think thats the best thing to do...and plus where do u find the parts for it!?

78chev · 07-29-2007, 10:04 PM

Hey, was'nt tryin to be mean. I was a little confused too b/c long stroke & small bore (relatively) usually means diesel.

Srubydo1986 · 07-29-2007, 10:29 PM

ya its gas and i think it kinda cool ive never heard of one

longhorn71 · 07-30-2007, 09:54 PM

the Crank in all the big block are the same as well

Yankeelights · 07-30-2007, 10:00 PM

Kool engine ... if I had it I'd have to drop it into something.

07-28-2007, 01:44 PM	#1
scotty101 Registered User Join Date: May 2007 Location: Edgerton MN Posts: 74	Gm 363? We have recently pulled a 363 engine out of an old straight truck and i was wonderin if this engine is worth anything or should it just be scrapped? it has a holley carb on it. Just wondering thanks

07-28-2007, 03:32 PM	#2
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: Gm 363? Ive never heard of a 363? What is it? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

07-28-2007, 05:04 PM	#3
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Re: Gm 363? http://www.73-87.com/7387info/engineid.htm This might help ID the engine better.. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

07-28-2007, 06:09 PM	#4
Yankeelights Registered User Join Date: Jun 2007 Location: NW Pennsylvania Posts: 92	Re: Gm 363? Got any PICs of this engine?

07-29-2007, 08:49 AM	#5
scotty101 Registered User Join Date: May 2007 Location: Edgerton MN Posts: 74	Re: Gm 363? I will try get some up today or tomorrow.

07-29-2007, 09:19 AM	#6
ont_guy_38 Registered User Join Date: Jul 2007 Location: Ontario Canada Posts: 1,006	Re: Gm 363? They were 366 cubic inches and is it worth anything?.Probably not to the average person but you never know till you advertise it for sale

07-29-2007, 10:32 AM	#7
ChaseDale3and8 Registered User Join Date: Jun 2007 Location: Springfield Mo. Posts: 1,086	Re: Gm 363? Those were a big block that were used in the C-60 dump trucks and in school buses I believe. I don't think that they are really worth a whole lot but somebody out there might want it so I'd advertise it for sale and see if anybody wants it before I'd scrap it. ...Joe __________________ I'm not speedin'! I'm qualifyin'!

07-29-2007, 03:18 PM	#8
scotty101 Registered User Join Date: May 2007 Location: Edgerton MN Posts: 74	Re: Gm 363? yeah it is a 366 not a 363 sorry for the confusion i ment to ask along time ago but never got around to it and now i had a mental lasps on the last number. but that is what i was wondering. thanks and this engine came out of a old feed truck. so what about a holley carb off of it do they fit on a 350? of 305 or are they different bolt patterns? here are some pics Last edited by scotty101; 07-29-2007 at 03:19 PM.

07-29-2007, 03:47 PM	#9
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: Gm 363? The carb will bolt up. Depending on what type of intake you have you may need an adapter. The distributor, air cleaner assy, alternator will also work. May have to remove the pulley on the alternator if you don't have a serpentine pulley setup. Some of the later 85-87? years had a serpentine and v-belt. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

07-29-2007, 04:40 PM	#10
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: Gm 363? Thats a Target Master so it's obviously been rebuilt. The 366 was a tall deck, small bore big block. It's bigger brother, the 427T was a 427 with a tall deck, which made it popular with racers because you could get larger displacements without paying big bucks for a tall deck aftermarket block. The 366 isn't really valued though because the bore is too small for performance purposes. The bore is smaller than that or a small block 350. It IS a very strong motor though. The pistons have an extra ring for durability because they were designed for the C60 medium duty trucks. It's a very low revving motor. The valves float at around 4000 RPM. Tons of torque though If you got it and it's a good running motor with lots of life left, I say run it. It'll be perfect for pushing a highway gears like 3.08's down the road since it's got so much torque. Would be good for towing too. If it's a low miles motor, then it's going to last you a LONG time.

07-29-2007, 04:57 PM	#11
scotty101 Registered User Join Date: May 2007 Location: Edgerton MN Posts: 74	Re: Gm 363? would a double stack air filter like that fit on a 350 or is that a pointess swap? vs. the stock air intake. thanks for the info on it, it is very intrestin and helpful i dont know alot about engines yet so i am trying to learn as much as i can

07-29-2007, 08:57 PM	#12
scotto0609 Junior Member Join Date: Nov 2005 Location: new york Posts: 226	Re: Gm 363? I have a 366 in my dually and it runs nice. Nice low end torque but runs outta steam after 3500 rpm. It ctually runs so nice that I dont want to take it out and fix the rear main seal,so I constantly put oil in it!

07-29-2007, 09:13 PM	#13
liljon285 That Guy Join Date: Sep 2005 Location: miami, fl Posts: 327	Re: Gm 363? So is it diesel or gas...if its gas then its a bbc right? I wouldnt mind building one...get a lot of unique rep. out of it! __________________ 1978 Chevy Scottdale Stepside, 3rd engine- 350c.i. built with cam and lifters, holley 670cfm carb. and intake,heads shaved .60. Truck is a project, and I am its restorererer!

07-29-2007, 09:28 PM	#14
78chev Registered User Join Date: Feb 2007 Location: redondo beach california Posts: 84	Re: Gm 363? Distributer means gas, right? Last edited by 78chev; 07-29-2007 at 09:30 PM. Reason: o

07-29-2007, 09:40 PM	#15
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Re: Gm 363? Sounds like you live in farm country, so if it is a good running motor and doesn't use oil, should be easy to get rid of as there are a lot of Chevy and GMC trucks that are used as farm truck. Just need to advertise it where farmers and such can see it if you want to get rid of it.



Register or Log In To remove these advertisements.

07-29-2007, 09:43 PM	#16
liljon285 That Guy Join Date: Sep 2005 Location: miami, fl Posts: 327	Re: Gm 363? Oh wow it was right there lol im blind! So is it considered a big block or small? __________________ 1978 Chevy Scottdale Stepside, 3rd engine- 350c.i. built with cam and lifters, holley 670cfm carb. and intake,heads shaved .60. Truck is a project, and I am its restorererer!

07-29-2007, 09:55 PM	#17
liljon285 That Guy Join Date: Sep 2005 Location: miami, fl Posts: 327	Re: Gm 363? oh OK it is a big block wow thats small...i would like to buy it and build it but !. i dont have the money lol and @. from eerybodys comments it dont think thats the best thing to do...and plus where do u find the parts for it!? __________________ 1978 Chevy Scottdale Stepside, 3rd engine- 350c.i. built with cam and lifters, holley 670cfm carb. and intake,heads shaved .60. Truck is a project, and I am its restorererer!

07-29-2007, 10:04 PM	#18
78chev Registered User Join Date: Feb 2007 Location: redondo beach california Posts: 84	Re: Gm 363? Hey, was'nt tryin to be mean. I was a little confused too b/c long stroke & small bore (relatively) usually means diesel.

07-29-2007, 10:29 PM	#19
Srubydo1986 The Crazy Machanic Join Date: Jan 2007 Location: Nokesville Va Posts: 1,437	Re: Gm 363? ya its gas and i think it kinda cool ive never heard of one __________________ 1986 Sliverado longbed 400 small block mean as hell, 700r4 trans (5 speed coming one day) 1970 chevelle 2dr sedan Latest update June 24 2007. *1957 4 door stationwagon - pink all original needing a good restore (body great, floors bad) newest additions 1965 shortbed fleet great granddads. Been told im nuts to bring it back from the dead (still going to happen) plans-all stock with a turbo 292 inline 3 speed column shift. and thats it big block 427 and 5 speed trans and ford 9 inch theyhave no home yet thinking what to put them in and a 79 c60 trash truck um no idea i have one

07-30-2007, 09:54 PM	#20
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: Gm 363? the Crank in all the big block are the same as well

07-30-2007, 10:00 PM	#21
Yankeelights Registered User Join Date: Jun 2007 Location: NW Pennsylvania Posts: 92	Re: Gm 363? Kool engine ... if I had it I'd have to drop it into something.

Register or Log In To remove these advertisements.