Pics of a Truck Megashifter installed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Project1970 · 09-24-2002, 06:24 AM

Just wondering if anyone has any, that's all.

Burlinator · 09-24-2002, 06:54 AM

TEASE!!!!!!!!!!!!!!!!

70c10 · 09-24-2002, 10:21 PM

Project 1970- Here is mine!. Side view

70c10 · 09-24-2002, 10:23 PM

Here is a top view.

muscletruck · 09-24-2002, 10:30 PM

nice colors......i have seen those floor mats in kragen and pep boys and thought they llooked ugly but they look really cool in the truck.......oh yah, also, i can't tell from the photo, but is that a high hump or low hump....i was gonna rip out my low hump and put in a high hump so i didn't have reach down to shift manually (when i get my shifter)
thanks

70c10 · 09-25-2002, 07:40 AM

Low hump c/10.

Burlinator · 09-25-2002, 07:51 AM

Quote:

Originally posted by 70c10
Project 1970- Here is mine!. Side view

is that carpet or floormats?? either way those are kicka$$ like the keychain too
doe the handle sit higher or lower than the seat? looks aobut even form the pic

70c10 · 09-25-2002, 09:24 AM

New carpet and new mats. It sits about even.

dubie · 09-25-2002, 09:33 AM

Can you get those shifters for a 3 spd?? Do you have a site where I could check it out?

70c10 · 09-25-2002, 12:31 PM

My trans is a 350 Turbo

DeepPurple · 09-26-2002, 11:46 AM

Here's another one for you

Primered_69 · 09-26-2002, 04:37 PM

Man that is a very nice interior I am not a big fan of purple but that is a classy use of it.

JoetheMobster · 09-26-2002, 07:02 PM

DEEPPURPLE,

What's the name of the color used on your truck?

A buddy of mine had a Dodge Rampage painted Plum Crazy on the exterior, and trim inside. It was a sweet ride when it was done! I am a purple fan!!

BTW -- do you have any more pics of your truck?

Project1970 · 09-26-2002, 07:51 PM

Thanks for the pics, guys...

DeepPurple, that's a high-hump cab, right? Very nice.

I've got a low-hump...so it'll sit about level with the bench? Hmm...seems like it might be a little low...is it hard to build it up a bit more to get it higher?

Cyco Path · 09-26-2002, 08:14 PM

The 4 speed shifter in my old 68 was basically even with the bench. and it wasnt too bad for shifting. Third gear was a bit of a stretch. I wouldn't think a Megashifter would be any harder to reach.

DeepPurple · 09-26-2002, 11:54 PM

Quote:

Originally posted by JoetheMobster
What's the name of the color used on your truck?

Some version of a dupont custom color, I'll have to dig out the actual color #.

Quote:

BTW -- do you have any more pics of your truck?

Sure do, I'm setting up a website for it in the near future. I'm just too picky on the setup.
Well that and making your own flash buttons can be slow work.

Quote:

Originally posted by Project1970
DeepPurple, that's a high-hump cab, right? Very nice

Well thank you, and yes I believe it is a high hump cab. Originally a 3 on the tree and a high hump cab...whattya gonna do?

09-24-2002, 06:24 AM	#1
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	Pics of a Truck Megashifter installed? Just wondering if anyone has any, that's all. __________________ Project1970 - LS1 Swap Complete!

09-24-2002, 06:54 AM	#2
Burlinator Just Another Crazy Canuck Join Date: Dec 2000 Location: Richmond,British Columbia Canada Posts: 1,228	TEASE!!!!!!!!!!!!!!!! __________________ 1985 454/465/205, 38.5x11-16BOGGERS soon to be installed: 14bDETROIT,Edelbrock Performer cam,intake and valve springs,Comp roller tips,MSD HEI

09-24-2002, 10:21 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Project 1970- Here is mine!. Side view Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-24-2002, 10:23 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Here is a top view. Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-24-2002, 10:30 PM	#5
muscletruck Registered User Join Date: Jan 2002 Location: anahiem,ca,usa Posts: 201	hmmm nice colors......i have seen those floor mats in kragen and pep boys and thought they llooked ugly but they look really cool in the truck.......oh yah, also, i can't tell from the photo, but is that a high hump or low hump....i was gonna rip out my low hump and put in a high hump so i didn't have reach down to shift manually (when i get my shifter) thanks __________________ i think i found me truck! 78 Crew Cab Dually 454/TH400, Dual Flows, Edelbrock Intake, Cam, Lifters, Billet Grill, K&N Airfilter, Grant Steering Wheel, A/C, soon to be power windows and locks, lots of plans for this... ....gas prices go down please

09-25-2002, 07:40 AM	#6
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Low hump c/10. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-25-2002, 09:24 AM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	New carpet and new mats. It sits about even. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-25-2002, 09:33 AM	#9
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Can you get those shifters for a 3 spd?? Do you have a site where I could check it out? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

09-25-2002, 12:31 PM	#10
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	My trans is a 350 Turbo __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-26-2002, 11:46 AM	#11
DeepPurple Real Deep... Join Date: Jun 2002 Location: St. Louis Posts: 116	Another Megashifter Here's another one for you Attached Images __________________ 1970 GMC C10 (Deep Purple) 383/700-R4 Mass Modifications 1976 GMC K5 Jimmy (Big Blue) 400/TH350 Coming soon to a drive-in near you... We have done So Much with So Little for So Long.. We are now qualified to do Anything with Nothing.

09-26-2002, 04:37 PM	#12
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	Man that is a very nice interior I am not a big fan of purple but that is a classy use of it.

09-26-2002, 07:02 PM	#13
JoetheMobster Listening since '86 Join Date: Sep 2001 Location: Canada Posts: 1,799	DEEPPURPLE, What's the name of the color used on your truck? A buddy of mine had a Dodge Rampage painted Plum Crazy on the exterior, and trim inside. It was a sweet ride when it was done! I am a purple fan!! BTW -- do you have any more pics of your truck? __________________ 2007 Saturn Aura - hey it WAS a GM product

09-26-2002, 07:51 PM	#14
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	Thanks for the pics, guys... DeepPurple, that's a high-hump cab, right? Very nice. I've got a low-hump...so it'll sit about level with the bench? Hmm...seems like it might be a little low...is it hard to build it up a bit more to get it higher? __________________ Project1970 - LS1 Swap Complete!

09-26-2002, 08:14 PM	#15
Cyco Path Registered User Join Date: May 2002 Location: Robertsdale, AL, USA Posts: 77	The 4 speed shifter in my old 68 was basically even with the bench. and it wasnt too bad for shifting. Third gear was a bit of a stretch. I wouldn't think a Megashifter would be any harder to reach. __________________ Looking for '67 to replace the '68 I sold. Robertsdale, AL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.