Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-29-2002, 05:50 AM | #1 |
Registered User
Join Date: Sep 2002
Location: California
Posts: 1
|
Help with Fuel guege electric diagrama
I have a fuel guage for my 67 chevy that I want to test it before instal it but I don't know how to run the wires. Some one can help me?
Thanks in advance.
__________________
fernanvel |
09-29-2002, 11:11 PM | #2 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
is pretty basic, one stud on guage gets hot side with key on and other stud gets variable ground signal from the sending unit
if you have a sneding unit from a gm vehicle laying around you can run ground off a battery to the structure of the unit and run wire from stud on the unit to stud on back f guage and run a second wire from hot on batt to the other stud on guage and then physiclaly moce he unit float arm and the guage needle wil move around depending on where you move unit arm. good luck |
Bookmarks |
|
|