Parting out 2001 C2500 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**way2lo2** · 10-05-2007, 01:44 PM

I bought this truck for the 55k mile 6.0 and trans, all other parts must go.
PM or email me with needs. 216 789-1647
Boris

Crank · 10-05-2007, 04:14 PM

What do the seats and steering wheel in this truck look like? And bet it doesnt have the 14bFF rear does it? Thanks
Brandon

**way2lo2** · 10-05-2007, 05:09 PM

Quote:

Originally Posted by Crank

What do the seats and steering wheel in this truck look like? And bet it doesnt have the 14bFF rear does it? Thanks
Brandon

Seat is not too bad, the driver's side has a split, wheel is ok, the rear end is 14 bolt cover.
$100 for seat and steering wheel. $250 for rearend

Crank · 10-05-2007, 09:42 PM

Well is the rear an actual 14 bolt full floater or is it the 14 bolt semi floater. I have the semi floater in my Silverado now and I'm interested in getting rid of it for the fullfloater mainly. If you can see if u can snap some pics of the steering wheel. Mine has the big hunks of rubber missing out of it and I wanna remedy that. Thanks
Brandon

4bynut · 10-05-2007, 10:08 PM

Is the cab and clip straight or wrecked? Also does it have a clean title? Thanks, Jason

**way2lo2** · 10-05-2007, 10:43 PM

Quote:

Originally Posted by 4bynut

Is the cab and clip straight or wrecked? Also does it have a clean title? Thanks, Jason

salvage title, cab is usable, clip is bad

bad 71 chevy · 10-05-2007, 10:52 PM

i would like to see what the seats look like thanks

**way2lo2** · 10-08-2007, 05:22 PM

Quote:

Originally Posted by bad 71 chevy

i would like to see what the seats look like thanks

here ya go

vtblazer · 10-08-2007, 06:03 PM

How about the bed?

6ft or 8ft?
(bet it's an 8)

I need one license plate light, one driving light bulb socket and the right side fog lamp if it has them.

vtblazer · 10-08-2007, 06:05 PM

Heated mirrors?

Plastic part behind the headlights, part of the adjuster is broken on mine too.
Be easier to take a pic and post it rather than try to explain it.
If your willing to part down that small, that's on the list as well, thanks.

**way2lo2** · 10-08-2007, 10:20 PM

Quote:

Originally Posted by vtblazer

Heated mirrors?

Plastic part behind the headlights, part of the adjuster is broken on mine too.
Be easier to take a pic and post it rather than try to explain it.
If your willing to part down that small, that's on the list as well, thanks.

doubt the mirrors are heated , this truck took a big hit upfront so I'm guessing the headlight brackets are toast but I will look.
Boris

**way2lo2** · 10-08-2007, 10:18 PM

Quote:

Originally Posted by vtblazer

How about the bed?

6ft or 8ft?
(bet it's an 8)

I need one license plate light, one driving light bulb socket and the right side fog lamp if it has them.

its an eight foot utility bed with tool boxes in the sides. The rear lights are ok, the fog light is probabaly damaged but I'll check tomorrow

toomanytoyz · 10-08-2007, 08:45 PM

I may be interested in seat's, Pm me an addy so i can maquest for Mileage........

Thanks, Rick

bad 71 chevy · 10-09-2007, 12:05 AM

can you ship something that big for a reasonable price if so how much would shipping be to 81301 thanks

**way2lo2** · 10-09-2007, 08:35 AM

Quote:

Originally Posted by bad 71 chevy

can you ship something that big for a reasonable price if so how much would shipping be to 81301 thanks

sorry, it would be a ton in costs too ship a bench seat.

Russell · 10-10-2007, 12:39 PM

I passed your number onto a guy who is looking for one of those utility boxes

orange66fleet · 10-22-2007, 10:00 AM

do you still have the truck for parts. I think I am interested in the front seat. how much. is the front bumper any good, I know you said it was hit up front. I live in parma. thanks mike

**way2lo2** · 10-22-2007, 11:04 AM

The seat is available but the front bumper is toast. 216 789-1647
Boris

RJGeister · 11-06-2007, 10:22 PM

Still got the seat? How does the center fold down? Is there a compartment in it? PM me some more pics.

Thanks,
Rich

**way2lo2** · 11-07-2007, 10:11 PM

sold the seat today, sorry

droppedgmc · 11-11-2007, 07:38 PM

interested in the hydraboost setup with pump and lines. how much shipped to 98273?

orange66fleet · 11-11-2007, 10:54 PM

Thanks for the seats they fit great.

vtblazer · 11-12-2007, 07:02 AM

Quote:

Originally Posted by orange66fleet

Thanks for the seats they fit great.

They look great.

What did you do to accommodate the three point seat belt's?
Or are you staying with the lap belt set up?

DROPPED15 · 11-13-2007, 09:39 PM

Quote:

Originally Posted by vtblazer

They look great.

What did you do to accommodate the three point seat belt's?
Or are you staying with the lap belt set up?

they are made in with seat.

10-05-2007, 01:44 PM	#1
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Parting out 2001 C2500 I bought this truck for the 55k mile 6.0 and trans, all other parts must go. PM or email me with needs. 216 789-1647 Boris Attached Images

10-05-2007, 04:14 PM	#2
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Re: Parting out 2001 C2500 What do the seats and steering wheel in this truck look like? And bet it doesnt have the 14bFF rear does it? Thanks Brandon

10-05-2007, 09:42 PM	#4
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Re: Parting out 2001 C2500 Well is the rear an actual 14 bolt full floater or is it the 14 bolt semi floater. I have the semi floater in my Silverado now and I'm interested in getting rid of it for the fullfloater mainly. If you can see if u can snap some pics of the steering wheel. Mine has the big hunks of rubber missing out of it and I wanna remedy that. Thanks Brandon

10-05-2007, 10:08 PM	#5
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Re: Parting out 2001 C2500 Is the cab and clip straight or wrecked? Also does it have a clean title? Thanks, Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

10-05-2007, 10:52 PM	#7
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	Re: Parting out 2001 C2500 i would like to see what the seats look like thanks __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

10-08-2007, 06:03 PM	#9
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Parting out 2001 C2500 How about the bed? 6ft or 8ft? (bet it's an 8) I need one license plate light, one driving light bulb socket and the right side fog lamp if it has them.

10-08-2007, 06:05 PM	#10
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Parting out 2001 C2500 Heated mirrors? Plastic part behind the headlights, part of the adjuster is broken on mine too. Be easier to take a pic and post it rather than try to explain it. If your willing to part down that small, that's on the list as well, thanks. Last edited by vtblazer; 10-08-2007 at 09:16 PM.

10-08-2007, 08:45 PM	#13
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Parting out 2001 C2500 I may be interested in seat's, Pm me an addy so i can maquest for Mileage........ Thanks, Rick

10-09-2007, 12:05 AM	#14
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	Re: Parting out 2001 C2500 can you ship something that big for a reasonable price if so how much would shipping be to 81301 thanks __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

10-10-2007, 12:39 PM	#16
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Parting out 2001 C2500 I passed your number onto a guy who is looking for one of those utility boxes __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

10-22-2007, 10:00 AM	#17
orange66fleet Lowered in Cleveland Join Date: Feb 2006 Location: Cleveland Posts: 120	Re: Parting out 2001 C2500 do you still have the truck for parts. I think I am interested in the front seat. how much. is the front bumper any good, I know you said it was hit up front. I live in parma. thanks mike

10-22-2007, 11:04 AM	#18
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Re: Parting out 2001 C2500 The seat is available but the front bumper is toast. 216 789-1647 Boris

11-06-2007, 10:22 PM	#19
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: Parting out 2001 C2500 Still got the seat? How does the center fold down? Is there a compartment in it? PM me some more pics. Thanks, Rich

11-07-2007, 10:11 PM	#20
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Re: Parting out 2001 C2500 sold the seat today, sorry

11-11-2007, 07:38 PM	#21
droppedgmc Truck Enthusiast Join Date: Dec 2006 Location: Arlington, WA Posts: 1,346	Re: Parting out 2001 C2500 interested in the hydraboost setup with pump and lines. how much shipped to 98273? __________________ '85 swb



Register or Log In To remove these advertisements.

11-11-2007, 10:54 PM	#22
orange66fleet Lowered in Cleveland Join Date: Feb 2006 Location: Cleveland Posts: 120	Re: Parting out 2001 C2500 Thanks for the seats they fit great. Attached Images

Register or Log In To remove these advertisements.