A little HELP fellas! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bolton66chev · 10-10-2007, 12:39 AM

So I am looking at replacing the: front fender, rocker panels/door panel floor pans; LMC Truck priced them at: Front fender: $220, each side; rocker panels/Door panels: $40 each side; Floor pans: $30 each side
Wanted to know if these were good deals or if there are any other deps., websites or stores to order them from for cheaper?

Thanks Fellas!

NF65Fleetside · 10-10-2007, 12:45 AM

try and check out Truck and Car shop, prices are a tad cheaper than LMC for those parts

rodnok1 · 10-12-2007, 12:53 PM

Personally I wouldn't buy squat from them, horrible customer service. They burned me on a core and messed up other things. I get all my stuff from Gmc Pauls

LIVE RUST · 10-12-2007, 07:12 PM

Just a little heads up, don't expect anything to fit. All a/m (China ) parts need a little massaging to work. I put a rocker and cab corners on mine and they were junk. I have seen the floor pans and they're about half the guage thickness of the stock floor pan. I'm not sure how the fenders and door panels will be but beware. You would think with all the people on this board, you could get more opinions of the aftermarket sheet metal. Sombody's had to have used them. I started a thread asking of the quality of rear fenders and I got one reply (thanks Mike). In my opinion, if a panel is at all repairable, try to save it. Good luck and I hope I haven't discouraged you, just giving you an honest opinion.

64GMCHorsepower · 10-12-2007, 10:08 PM

I Would check the board, several board vendors can help you with what fits better, and which has the best quality replacement parts...

krue · 10-12-2007, 10:17 PM

Click the link in my sig and scroll down to the red names for board supporting vendors. Can't hurt to check them out.

PA66C20 · 10-12-2007, 11:30 PM

Quote:

Originally Posted by bolton66chev

So I am looking at replacing the: front fender, rocker panels/door panel floor pans; LMC Truck priced them at: Front fender: $220, each side; rocker panels/Door panels: $40 each side; Floor pans: $30 each side
Wanted to know if these were good deals or if there are any other deps., websites or stores to order them from for cheaper?

Thanks Fellas!

I do have to agree that LMC is not the most impressive. I've not done anything with returning a core yet, but they have been good on my shipments so far. The only place I found around the prices you gave is bowtiebits.com $225 for a front fender, $39 for the rocker, and $22 for the floor pans. I've not had a problem with these guys either, I screwed up when I first ordered my wiring harnesses from them and they exchanged them even though they weren't supposed to. Don't forget you get what you pay for.

Shawn

bolton66chev · 10-13-2007, 12:23 AM

Thanks for all the help guys, now it will be time to weigh my odds....

baddawg65 · 10-13-2007, 11:16 AM

I'm thinking of trying U.S. Body source to replace my front fenders. If you check their site, they also have metal repo body parts. The shipping seems to be the biggest difference in price factors. http://www.usbody.com/

stepside66 · 10-14-2007, 01:30 AM

Quote:

Originally Posted by PA66C20

I do have to agree that LMC is not the most impressive. I've not done anything with returning a core yet, but they have been good on my shipments so far. The only place I found around the prices you gave is bowtiebits.com $225 for a front fender, $39 for the rocker, and $22 for the floor pans. I've not had a problem with these guys either, I screwed up when I first ordered my wiring harnesses from them and they exchanged them even though they weren't supposed to. Don't forget you get what you pay for.

Shawn

that guy has quite a bit of stuff for these trucks I go to his shop every once in awhile

onebad'65 · 10-13-2007, 06:57 PM

I've ordered thru LMC, americanclassic.com, and I've ordered parts thru Chevy duty. LMC is reasonable on a lot of parts but chevy duty has been a better distributor to me I get the parts faster and they've got a great customer service dept.

Preacher · 10-14-2007, 12:47 AM

I agree with you, onebad65. Chevy Duty has been good to me also and I have gotten fenders from them, good quality. If your in need of wiring, Ron Francis Wire works is awesome. All kinds of options from them at no real extra cost. I completely rewired my truck in a weekend. These wiring kits are for idiots, you can't mess up! Wire works is in Chester, PA on the outskirts of Philly.

PAPIS 65 · 10-14-2007, 01:02 AM

Ive got a brand new driver front fender im trying to get rid of if thats the side you need

10-10-2007, 12:39 AM	#1
bolton66chev Registered User Join Date: Sep 2007 Location: Tacoma, WA. Posts: 25	A little HELP fellas! So I am looking at replacing the: front fender, rocker panels/door panel floor pans; LMC Truck priced them at: Front fender: $220, each side; rocker panels/Door panels: $40 each side; Floor pans: $30 each side Wanted to know if these were good deals or if there are any other deps., websites or stores to order them from for cheaper? Thanks Fellas!

10-10-2007, 12:45 AM	#2
NF65Fleetside Registered User Join Date: Feb 2007 Location: Los Angeles Posts: 674	Re: A little HELP fellas! try and check out Truck and Car shop, prices are a tad cheaper than LMC for those parts

10-12-2007, 12:53 PM	#3
rodnok1 Registered User Join Date: Jun 2003 Location: Linden, North Carolina Posts: 617	Re: A little HELP fellas! Personally I wouldn't buy squat from them, horrible customer service. They burned me on a core and messed up other things. I get all my stuff from Gmc Pauls __________________ 64 Panel Rebuild Pics Clutch Replacement and Borg Warner T10 Trans Rebuild 64 Panel 1/2 Ton 350cubes/400hp BorgWarner t-10 3:73 Auburn Posi

10-12-2007, 07:12 PM	#4
LIVE RUST 1966 Chevy/GMC Mongrel K10 Join Date: Sep 2007 Location: Western MA Posts: 160	Re: A little HELP fellas! Just a little heads up, don't expect anything to fit. All a/m (China ) parts need a little massaging to work. I put a rocker and cab corners on mine and they were junk. I have seen the floor pans and they're about half the guage thickness of the stock floor pan. I'm not sure how the fenders and door panels will be but beware. You would think with all the people on this board, you could get more opinions of the aftermarket sheet metal. Sombody's had to have used them. I started a thread asking of the quality of rear fenders and I got one reply (thanks Mike). In my opinion, if a panel is at all repairable, try to save it. Good luck and I hope I haven't discouraged you, just giving you an honest opinion.

10-12-2007, 10:08 PM	#5
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: A little HELP fellas! I Would check the board, several board vendors can help you with what fits better, and which has the best quality replacement parts... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

10-12-2007, 10:17 PM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: A little HELP fellas! Click the link in my sig and scroll down to the red names for board supporting vendors. Can't hurt to check them out. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-13-2007, 12:23 AM	#8
bolton66chev Registered User Join Date: Sep 2007 Location: Tacoma, WA. Posts: 25	Re: A little HELP fellas! Thanks for all the help guys, now it will be time to weigh my odds....

10-13-2007, 11:16 AM	#9
baddawg65 Registered User Join Date: Mar 2007 Location: wyoming Posts: 83	Re: A little HELP fellas! I'm thinking of trying U.S. Body source to replace my front fenders. If you check their site, they also have metal repo body parts. The shipping seems to be the biggest difference in price factors. http://www.usbody.com/ __________________ l6 Performance Parts http://www.merchantamerica.com/chevy...ex.php?ba=home BOTHERS http://www.brotherstrucks.com/ LMC http://www.lmctruck.com/ Dash LEDs http://www.whitegauges.net/index.php

10-13-2007, 06:57 PM	#11
onebad'65 Registered User Join Date: Mar 2007 Location: Lawrenceville Posts: 31	Re: A little HELP fellas! I've ordered thru LMC, americanclassic.com, and I've ordered parts thru Chevy duty. LMC is reasonable on a lot of parts but chevy duty has been a better distributor to me I get the parts faster and they've got a great customer service dept.

10-14-2007, 12:47 AM	#12
Preacher New Member Join Date: Jul 2007 Location: Rochester, NY Posts: 19	Re: A little HELP fellas! I agree with you, onebad65. Chevy Duty has been good to me also and I have gotten fenders from them, good quality. If your in need of wiring, Ron Francis Wire works is awesome. All kinds of options from them at no real extra cost. I completely rewired my truck in a weekend. These wiring kits are for idiots, you can't mess up! Wire works is in Chester, PA on the outskirts of Philly. __________________ 1961 GMC 1/2 ton long stepside 2002 Chevy Silverado 2500 4X4 HD 1979 Chevy Z/28 2003 Chevy Monte Carlo SS Isaiah 40:8 "The grass withers, the flower fades, but the word of God stands forever."

10-14-2007, 01:02 AM	#13
PAPIS 65 Registered User Join Date: Aug 2007 Location: Apache Jct. Az. Posts: 5	Re: A little HELP fellas! Ive got a brand new driver front fender im trying to get rid of if thats the side you need



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.