OK, how many with blazers laying frame??? Or Close - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jkade · 11-08-2007, 06:53 PM

Seems that is is going to be hard to get the rear low using the trailing arms and not much room for a 4 link. Thinking abougt some custom trailing arms like the air ride tech arms would help with clearence. Anyone have pics of finished product? I already have the 8" notch for the rear and the bags mounts that mount to the rearend.
Thanks

impala_631 · 11-08-2007, 11:26 PM

if space is a issue you could run a 2link with a pan hard bar, that would keep the 4link bars from coming up into the cab, you would still have a cnotch that can be covered over easily

gringoloco · 11-09-2007, 04:13 AM

You already know where I stand. I think Bagged74 is gonna be the closest to what you're looking for- his trailing arms are a pretty good way to avoid frame interference problems. Do something like that and stack as much block in there as you can...

jkade · 11-09-2007, 03:05 PM

I talked to suicide doors and he said he could build me a 20 parallel 4 link that would be 20"s long. He said it would still work good at that lenght. I will have to do some measuring and see if that will work.

gringoloco · 11-09-2007, 09:36 PM

I like the triangulated superlift from suicidedoors. If I were to link mine, that is the way I would go...

edflores · 11-15-2007, 08:10 PM

i lay frame. i have a 2 link with a panard. but mines an 81. you could do the parralel setup from sd, but where are you gonna put your bags?

PBFAB.COM · 11-15-2007, 09:01 PM

Just picked up a 2wd Blazer to prototype a rear kit on... hoping to have it available around the first of the year... the four-link will be designed to allow the frame to lay with the appropriate sized notch (the "appropriate" sized notch will be part of the complete kit). It'll be 100% bolt-on.

**N2TRUX** · 11-15-2007, 09:45 PM

Quote:

Originally Posted by porterbuilt

Just picked up a 2wd Blazer to prototype a rear kit on... ..

What year Blazer?

Rokcrln · 11-15-2007, 09:55 PM

Quote:

Originally Posted by N2TRUX

What year Blazer?

It is a 70 to 72 would be my guess, What else would Nate get to play with

Hey Nate you should check into one of those DropMenbers for your new blazer, I hear they work OK

Also I have a 70 that will be laying frame in a whole new way! No details sorry.

Kevin
LFD Inc.

PBFAB.COM · 11-15-2007, 11:17 PM

Quote:

Originally Posted by Rokcrln

It is a 70 to 72 would be my guess, What else would Nate get to play with

Hey Nate you should check into one of those DropMenbers for your new blazer, I hear they work OK

Also I have a 70 that will be laying frame in a whole new way! No details sorry.

Kevin
LFD Inc.

It will be a Dropmember poster child. Who knows when I will have time to finish it.

Hopefully it won't get stuck out back with all my other trucks...

PBFAB.COM · 11-15-2007, 11:25 PM

Quote:

Originally Posted by N2TRUX

What year Blazer?

71... it was an abondoned project. I purchased the tub, doors, and frame from the customer.

We already had replaced the front floor sections, inner and outer rocker panels (both sides), rocker boxes, lower A pillars, lower B pillars, hadn't quite finished attaching the modified SWB bedside skins, and hung some new doors. And we smoothed out the firewall.

Here's a before pic...

gringoloco · 11-16-2007, 12:22 AM

Quote:

Originally Posted by porterbuilt

71... it was an abondoned project. I purchased the tub, doors, and frame from the customer.

We already had replaced the front floor sections, inner and outer rocker panels (both sides), rocker boxes, lower A pillars, lower B pillars, hadn't quite finished attaching the modified SWB bedside skins, and hung some new doors. And we smoothed out the firewall.

Here's a before pic...

Did he spend all his money on the rendering?

jkade · 11-15-2007, 09:46 PM

Quote:

Originally Posted by porterbuilt

Just picked up a 2wd Blazer to prototype a rear kit on... hoping to have it available around the first of the year... the four-link will be designed to allow the frame to lay with the appropriate sized notch (the "appropriate" sized notch will be part of the complete kit). It'll be 100% bolt-on.

Anything on the c4 dropmember??
Thanks, Kade

FRENCHBLUE72 · 11-21-2007, 06:16 PM

Nate is that blazer this one?

PBFAB.COM · 11-21-2007, 06:22 PM

Quote:

Originally Posted by FRENCHBLUE72

Nate is that blazer this one?

That's the one... plans have changed a little though for the end result.

11-08-2007, 06:53 PM	#1
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	OK, how many with blazers laying frame??? Or Close Seems that is is going to be hard to get the rear low using the trailing arms and not much room for a 4 link. Thinking abougt some custom trailing arms like the air ride tech arms would help with clearence. Anyone have pics of finished product? I already have the 8" notch for the rear and the bags mounts that mount to the rearend. Thanks

11-08-2007, 11:26 PM	#2
impala_631 :( BYEBYE :( Join Date: Sep 2007 Location: terre haute indiana Posts: 200	Re: OK, how many with blazers laying frame??? Or Close if space is a issue you could run a 2link with a pan hard bar, that would keep the 4link bars from coming up into the cab, you would still have a cnotch that can be covered over easily __________________ THE IMPALA 74 C-10 "SNOTTROCKET"BUILD UP http://www.layitlow.com/forums/index...owtopic=370899

11-09-2007, 04:13 AM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: OK, how many with blazers laying frame??? Or Close You already know where I stand. I think Bagged74 is gonna be the closest to what you're looking for- his trailing arms are a pretty good way to avoid frame interference problems. Do something like that and stack as much block in there as you can... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 11-09-2007 at 04:15 AM.

11-09-2007, 03:05 PM	#4
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: OK, how many with blazers laying frame??? Or Close I talked to suicide doors and he said he could build me a 20 parallel 4 link that would be 20"s long. He said it would still work good at that lenght. I will have to do some measuring and see if that will work.

11-09-2007, 09:36 PM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: OK, how many with blazers laying frame??? Or Close I like the triangulated superlift from suicidedoors. If I were to link mine, that is the way I would go... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-15-2007, 08:10 PM	#6
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: OK, how many with blazers laying frame??? Or Close i lay frame. i have a 2 link with a panard. but mines an 81. you could do the parralel setup from sd, but where are you gonna put your bags?

11-15-2007, 09:01 PM	#7
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: OK, how many with blazers laying frame??? Or Close Just picked up a 2wd Blazer to prototype a rear kit on... hoping to have it available around the first of the year... the four-link will be designed to allow the frame to lay with the appropriate sized notch (the "appropriate" sized notch will be part of the complete kit). It'll be 100% bolt-on. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

11-21-2007, 06:16 PM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: OK, how many with blazers laying frame??? Or Close Nate is that blazer this one? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.