The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-12-2007, 10:30 PM   #1
streetmaster42
Registered User
 
Join Date: Aug 2007
Location: Uniontown,PA
Posts: 60
In need of emission system help for my 76 GMC

Im kinda dealing with a tuffy of a problem with the emission system on my 76 GMC. The problem is im not sure exactly what all i need to pass the peekaboo test in the County i live in here in PA. The county of Fayette, is one of 42 that dont require you to pass an emissions test. You just have to pass the visual anti-tampering check test, before they will slap that sticker on. I got My 1976 GMC Sierra back in 1998, came factory with an I6, and a 3 on the tree. I tore it all apart that year to do a ground up resto, because there was just to much rust to mention. I since then replaced the motor with a 350sbc, TH350, a painless wiring kit, did the frame, got a better bed that i just tore back apart due to rust, and im redoing the crappy job some schmuck done on my rockers and cab corners, I-NO LOL. Ive got the cat for the exhaust, im just not sure what emissions crapp they put on the 76 modles with 350sbc. (Oppinions please) sombody please
streetmaster42 is offline   Reply With Quote
Old 11-12-2007, 11:29 PM   #2
Ivan D.
glamoros piece o' lowlife
 
Ivan D.'s Avatar
 
Join Date: Mar 2007
Location: Redford, MI
Posts: 1,164
Re: In need of emission system help for my 76 GMC

You got a shortbed, right, is it a 1/2-ton or a 3/4-ton? Halftons are considered light-duty and therefore got tons of emissions BS, not so much the case with the heavy-duty trucks such as the Big 10s and the 3/4-tons and 1-tons.
__________________
The more I drink, the more I drink, the more I drink...
diesel, reg cab, long bed, 4 across the rear, single stack, wooden stakes, and lotsa lights - the Hay Express
Ivan D. is offline   Reply With Quote
Old 11-13-2007, 01:45 AM   #3
streetmaster42
Registered User
 
Join Date: Aug 2007
Location: Uniontown,PA
Posts: 60
Re: In need of emission system help for my 76 GMC

Yeah man its a 1/2-ton, shortbed basicly a hinds 57 mix, titled as a 76, 76 frame and vin plate, 86 cab with a 73-87 painless wiring kit, 79 bed, 84 350sbc, not sure what the TH350's out of. I havent really kept up with all the emissions laws because around town here, there used to be a bunch of those lickem and stickem inspection guys around. But there far and few in between thiese days, either got busted or just went out of buisness. So now i feel like im a day late and a dollar short. I just figured id get an idea of just what exactly was on a 76 so i dont start throwing more stuff in there than i need. I dont believe that i need an air pump on it, or maybe i do . I do know that ill need an egr valve, which meen ill have to chuck the Eddy EPS performer manifold for the egr type . Plus ill need one of those charcoal canisters. Just looking for more info i guess.
streetmaster42 is offline   Reply With Quote
Old 11-13-2007, 11:40 AM   #4
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
Re: In need of emission system help for my 76 GMC

i had a 76 chevy longbed half ton that came bone stock about five years back.. and it had NO emmissions stuff at all , not even a catalyctic and it passed emmissions in NJ from the state, which is also a visual inspection
if you have any doubts why not askat the inspection station
__________________
Bob



1951 International running on a squarebody chassis


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 11-13-2007, 12:26 PM   #5
streetmaster42
Registered User
 
Join Date: Aug 2007
Location: Uniontown,PA
Posts: 60
Re: In need of emission system help for my 76 GMC

Thanx (old rusty C10) for your input but i wander if your bone stock motor had one of those EGR's, ands the charcoal canisters on it. I was planning on one of those EDL-9972 Q-Jets from summit, along with an EDL-3701 manifolds that have a hookup for the EGR. Besides my carb is an Edelbrock 1405 performer and only 600 cfm, which is messin up already, and that Q-Jet has 750 cfm. The comba im thinkin of should run just as well if not better than the 600 cfm on the Performer EPS thats on the motor right now.
streetmaster42 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com