Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
11-29-2007, 10:58 PM | #1 |
Easy Does It
Join Date: Apr 2007
Location: Dirdy Mo , North Carolina
Posts: 450
|
73-87 to 64-66 front and rear end swap?
Can anyone tell me if you can bolt up the front end - control arms,suspension,brakes ect.. from a 73-87 pick up to a 64-66 truck. could you swap the whole front end? Also how about the rear end on these? has anyone done this or can anyone help. Thanks.
|
11-29-2007, 11:05 PM | #2 |
Registered User
Join Date: Mar 2006
Location: Kansas
Posts: 865
|
Re: 73-87 to 64-66 front and rear end swap?
Don't know about the front but I have a 60 1 ton that was changed to a 79 dually rear. Parking brakes were different. verify the size of the center bolts. and I would recommend using the newer plates that the U bolts go through. I tried using the original and one of them broke shortly after.
|
11-30-2007, 10:10 AM | #3 |
Registered User
Join Date: Sep 2006
Location: San Francisco
Posts: 4,782
|
Re: 73-87 to 64-66 front and rear end swap?
Yes they bolt up... My front end is all from a 75. Including center link and idler arm. Had to redrill for the idler arm...
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
11-30-2007, 10:29 AM | #4 |
Senior Member
Join Date: May 2005
Location: Portales, NM
Posts: 359
|
Re: 73-87 to 64-66 front and rear end swap?
It will work, did mine with a 86 C10 front end, and a 72 (I know not a 73-87) 12 bolt rear
__________________
________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5 |
11-30-2007, 01:35 PM | #5 |
SIR
Join Date: Apr 2005
Location: grants pass oregon,usa
Posts: 658
|
Re: 73-87 to 64-66 front and rear end swap?
...found a "72" doner truck,pulled front suspention and rear end cleaned it up replaced all needed parts (all available),deilled 2 holes and it was a stright bolt in. use all "grade 8" bolts or stainless...
__________________
66long low fleet http://community.webshots.com/user/LVNR66 |
Bookmarks |
|
|