Installing a new (uncut) dash on a 72? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72ChevyAZ · 12-28-2007, 11:37 AM

Is this something that is a pain in the butt? I have access to a good dash for free out of a 68. Is there any issues installing it into a 72? How do you go about doing it?
Thanks for any advice.

**Classic Heartbeat** · 12-28-2007, 01:36 PM

The only issue that I can think of is the 67-68 dash is not set up for the pedel style Ebrake. The 67/68s are hand brakes. Should only have to drill an extra hole though... WES

Rokcrln · 12-28-2007, 01:44 PM

Is it just the center section that is bad on yours? If so then I feel the easiest way is to just swap out the middle of the dash. If you do the entire thing you will have to pull the front window and drill out all the stop welds that hold the dash in place. Then do the same to teh dash you are going to use to put back in. If you just do the center section you can cut it behind the dash pad, glove box door and cluster. This only leaves about 6" of weld that has to be finished and the front window can stay in!

Kevin
LFD Inc.

72ChevyAZ · 12-28-2007, 05:00 PM

Well, just got back from picking up the doors and the dash is cut for a stereo. The PO said that it wasn't.....Oh Well, It was free.

Kevin, thanks for the advise. It would make more sence to just replace the center instead of the whole thing.

12-28-2007, 11:37 AM	#1
72ChevyAZ LWB Club Join Date: Dec 2007 Location: Queen Creek, Arizona Posts: 114	Installing a new (uncut) dash on a 72? Is this something that is a pain in the butt? I have access to a good dash for free out of a 68. Is there any issues installing it into a 72? How do you go about doing it? Thanks for any advice. __________________ 72 Chevy Custom LWB

12-28-2007, 01:36 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Installing a new (uncut) dash on a 72? The only issue that I can think of is the 67-68 dash is not set up for the pedel style Ebrake. The 67/68s are hand brakes. Should only have to drill an extra hole though... WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

12-28-2007, 01:44 PM	#3
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Installing a new (uncut) dash on a 72? Is it just the center section that is bad on yours? If so then I feel the easiest way is to just swap out the middle of the dash. If you do the entire thing you will have to pull the front window and drill out all the stop welds that hold the dash in place. Then do the same to teh dash you are going to use to put back in. If you just do the center section you can cut it behind the dash pad, glove box door and cluster. This only leaves about 6" of weld that has to be finished and the front window can stay in! Kevin LFD Inc. Attached Images

12-28-2007, 05:00 PM	#4
72ChevyAZ LWB Club Join Date: Dec 2007 Location: Queen Creek, Arizona Posts: 114	Re: Installing a new (uncut) dash on a 72? Well, just got back from picking up the doors and the dash is cut for a stereo. The PO said that it wasn't.....Oh Well, It was free. Kevin, thanks for the advise. It would make more sence to just replace the center instead of the whole thing. __________________ 72 Chevy Custom LWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.