Teeitup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*ksjh1316* · 01-10-2008, 07:35 PM

Randy has to be one of the best sellers on this board. Over the last few months I have purchased a truck from him as well as pretty much the complete set up to do a v-8 and auto tranny setup. The parts were always better than described and he knows his stuff. He even helped me out when the wife brought the $$ hammer down on me and I had to slowly get the parts I wanted. Just wanted to say thanks to him and let anyone new that is thinking about buying from him to do so with no fear.

Bishops Trucks · 01-10-2008, 10:45 PM

He has always treated me great. Randy is a good guy weather he is selling parts or just being himself. Thanks Randy for all you do!

jkaylor68gmc · 01-11-2008, 03:50 AM

I bought a sway bar from him week before last and it was just as he described and ingreat shape. He is a really good board member.

chipflyer · 01-11-2008, 03:58 AM

I agree with all the above comments. Its so nice to live within 10 minutes of such a knowledgeable, friendly guy.

**Thealien** · 01-11-2008, 06:36 AM

Just recieved something I bought from him this morning. Well packaged and just as described. An asset to our hobby!

nofords · 01-12-2008, 02:54 PM

That Randy is a super guy. Just met him last Saturday when my buddy and I drove down to Meriden to get a set of buddybuckets. He took time to shoot the breeze, let me look around his shed, he has a killer 67k10 BTY, and generaly made me feel at home. We could only spend a little time there due to the distance left to go, but I would not hesitate to reccomend(no idea how to spell that) him to anyone needing parts. A very honest, all around number one kind of guy.

......nofords

**special-K** · 01-13-2008, 04:48 AM

I think he`s a liar.He said it was snowing and icey when he pulled my parts and shipped them.When they showed up there wasn`t any snow on them at all and it was warm out.

teeitup · 01-13-2008, 02:22 PM

THANKS SO MUCH for all the KIND words guys!!!!!!! I really do appreciate it, it guys like you all that keeps me motivated to keep doing this stuff. THANKS to ONE and ALL!!!!!!! RANDY

FuelCellGuy · 01-14-2008, 04:35 AM

Randy has thumbs up from me as well!

**too much stuff** · 01-15-2008, 06:21 PM

Top notch all the way!!! Had many dealings with him and never a problem. A+++++

724x4a/cchevy · 01-17-2008, 06:02 PM

I agree. I've met Randy at a swap meet in Kansas City. he's a great guy! We have both bought/sold stuff together and absolutely no problems!!

retodd7711 · 01-19-2008, 08:06 AM

Another satisfied customer. .

Cyclone44 · 02-11-2008, 01:28 PM

I bought a couple of parts from him and they were better then listed...Great deal...Thanks Randy

BB6T7 · 03-08-2008, 12:59 PM

I recieved parts from Randy today. He is easy to work with,I wish all my parts deals were this painless! I would buy from him any time. Thanks Randy.

**88JRFAN** · 03-16-2008, 07:00 AM

Bought Another Part From Him Today, Just Wanted To Say How Great Of A Guy He Is. Always A Pleasure To Deal With. Thanks Again, Daren

Mister laugh · 04-13-2008, 06:15 AM

Received what i ordered from randy today, and it is much better than expected, and arrived quicker than i thought it would. Two thumbs up.

DREAMS OF A 67 · 04-13-2008, 06:39 AM

Good parts at good prices.

toomanytoyz · 04-14-2008, 06:18 AM

Quote:

Originally Posted by DREAMS OF A 67

Good parts at good prices.

I Agree 100%...........

Rick

teeitup · 04-20-2008, 04:13 PM

THANKS guys!!!!!! I really do appreciate it!!! You guys are all GREAT to deal with. This is very nice of you, THANK You all for the support!!! Randy

420am · 04-14-2008, 06:03 AM

Picked up my bumper out at The Woodlands today from Randy via 72IronMike. Looks great!! Thanks a ton!

01-10-2008, 07:35 PM	#1
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Teeitup Randy has to be one of the best sellers on this board. Over the last few months I have purchased a truck from him as well as pretty much the complete set up to do a v-8 and auto tranny setup. The parts were always better than described and he knows his stuff. He even helped me out when the wife brought the $$ hammer down on me and I had to slowly get the parts I wanted. Just wanted to say thanks to him and let anyone new that is thinking about buying from him to do so with no fear.

01-10-2008, 10:45 PM	#2
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: Teeitup He has always treated me great. Randy is a good guy weather he is selling parts or just being himself. Thanks Randy for all you do! __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

01-11-2008, 03:50 AM	#3
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Teeitup I bought a sway bar from him week before last and it was just as he described and ingreat shape. He is a really good board member. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

01-11-2008, 03:58 AM	#4
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Teeitup I agree with all the above comments. Its so nice to live within 10 minutes of such a knowledgeable, friendly guy. __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

01-11-2008, 06:36 AM	#5
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Teeitup Just recieved something I bought from him this morning. Well packaged and just as described. An asset to our hobby!

01-12-2008, 02:54 PM	#6
nofords Registered User Join Date: Oct 2007 Location: Hyannis,Ne. Posts: 28	Re: Teeitup That Randy is a super guy. Just met him last Saturday when my buddy and I drove down to Meriden to get a set of buddybuckets. He took time to shoot the breeze, let me look around his shed, he has a killer 67k10 BTY, and generaly made me feel at home. We could only spend a little time there due to the distance left to go, but I would not hesitate to reccomend(no idea how to spell that) him to anyone needing parts. A very honest, all around number one kind of guy.......nofords

01-13-2008, 04:48 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Teeitup I think he`s a liar.He said it was snowing and icey when he pulled my parts and shipped them.When they showed up there wasn`t any snow on them at all and it was warm out. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-16-2008 at 05:28 AM.

01-13-2008, 02:22 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Teeitup THANKS SO MUCH for all the KIND words guys!!!!!!! I really do appreciate it, it guys like you all that keeps me motivated to keep doing this stuff. THANKS to ONE and ALL!!!!!!! RANDY __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-14-2008, 04:35 AM	#9
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Teeitup Randy has thumbs up from me as well!

01-15-2008, 06:21 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Teeitup Top notch all the way!!! Had many dealings with him and never a problem. A+++++ __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-17-2008, 06:02 PM	#11
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Teeitup I agree. I've met Randy at a swap meet in Kansas City. he's a great guy! We have both bought/sold stuff together and absolutely no problems!! __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

01-19-2008, 08:06 AM	#12
retodd7711 chrome makes it go FASTER! Join Date: Feb 2007 Location: Cleveland Tennessee Posts: 2,884	Re: Teeitup Another satisfied customer. . __________________ She can't cook and she won't clean. But she looks good in a skirt and she brings me beer. She can stay for now. EDIT:: But she left me anyway, So forget her. 1962 GMC Stepside V6 4 speed My rolling resto thread http://67-72chevytrucks.com/vboard/s...d.php?t=324226 My old farm truck http://67-72chevytrucks.com/vboard/s...=1#post3465005

02-11-2008, 01:28 PM	#13
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Teeitup I bought a couple of parts from him and they were better then listed...Great deal...Thanks Randy

03-08-2008, 12:59 PM	#14
BB6T7 Registered User Join Date: Oct 2007 Location: springfield,oregon Posts: 17	Re: Teeitup I recieved parts from Randy today. He is easy to work with,I wish all my parts deals were this painless! I would buy from him any time. Thanks Randy.

03-16-2008, 07:00 AM	#15
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Teeitup Bought Another Part From Him Today, Just Wanted To Say How Great Of A Guy He Is. Always A Pleasure To Deal With. Thanks Again, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM



Register or Log In To remove these advertisements.

04-13-2008, 06:15 AM	#16
Mister laugh Registered User Join Date: Jun 2007 Location: Edmonton, Alberta Posts: 423	Re: Teeitup Received what i ordered from randy today, and it is much better than expected, and arrived quicker than i thought it would. Two thumbs up.

04-13-2008, 06:39 AM	#17
DREAMS OF A 67 Step Brother Join Date: Sep 2007 Location: knoxville TN Posts: 1,950	Re: Teeitup Good parts at good prices.

04-20-2008, 04:13 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Teeitup THANKS guys!!!!!! I really do appreciate it!!! You guys are all GREAT to deal with. This is very nice of you, THANK You all for the support!!! Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-14-2008, 06:03 AM	#20
420am Registered User Join Date: Feb 2008 Location: Madison, WI Posts: 357	Re: Teeitup Picked up my bumper out at The Woodlands today from Randy via 72IronMike. Looks great!! Thanks a ton! __________________ 1972 Long Bed Cheyenne Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282 Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)

Register or Log In To remove these advertisements.