Need bezel and instrument housing. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gchemist · 01-15-2008, 01:30 AM

I need to mockup my Autometer guage setup. I don't want to pull my current setup until the new guages are ready to go in. I need an old bezel and stock instrument housing. I will pay for shipping but don't feel like pay for the parts. I'm going to cut them up and not use them. I only need to find a better way to install an Auto Pro Comp guage setup. I will credit anyone who provides any parts on the article writeup.

**old Rusty C10** · 01-15-2008, 07:07 AM

i have something for you i think let me look in the disaster known as my basement
If i do have a bezel its for a non air conditioned truck.

Kixwy2 · 01-15-2008, 05:07 PM

I've got one out of a 74 that is cracked off where the radio was - do you just need the gauge area or the whole dash?

gchemist · 01-15-2008, 07:29 PM

I just need the guage area. As long the housing can be fitted to the bezel it will work. I can't remember, does the bezel screw into the housing?

Kixwy2 · 01-15-2008, 07:49 PM

Don't think so... the 74 has screw clips that mount on the metal dash and the bezel screws into those. 4 at the top, 2 each side, and 4 around the base of the steering wheel mount...

Mine looks like this, except the radio section is missing.

gchemist · 01-16-2008, 03:00 PM

Quote:

Originally Posted by Kixwy2

Don't think so... the 74 has screw clips that mount on the metal dash and the bezel screws into those. 4 at the top, 2 each side, and 4 around the base of the steering wheel mount...

Mine looks like this, except the radio section is missing.

Let me know if you want to part with it. I'll send you shipping costs for it.

Thanks!

Anyone have a housing available?

bigblock73 · 01-16-2008, 01:38 AM

The top of the bezel screws to the housing, the rest screw to the metal part of the dash.

Kixwy2 · 01-16-2008, 03:50 PM

It's all yours! I can't imagine shipping is any more than $15 going USPS. PM me your address and I can take it to the post office tomorrow.

**old Rusty C10** · 01-22-2008, 09:34 AM

i wont part with any of my covers but it looks like you got that covered.. i have a instrument guage setup if you still need it.. i want to keep the speedo , fuel guage, temp guage, clock and ammeter if you only need it for the backing part you cna have the oil pressure one as it appears broken.. ill get a guess at shipping if you wanna send me your addy

gchemist · 01-23-2008, 04:47 PM

Keep what you want. I'll take the housing. PM sent with address.

Thanks!!

That's one big FLASH!!

01-15-2008, 01:30 AM	#1
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Need bezel and instrument housing. I need to mockup my Autometer guage setup. I don't want to pull my current setup until the new guages are ready to go in. I need an old bezel and stock instrument housing. I will pay for shipping but don't feel like pay for the parts. I'm going to cut them up and not use them. I only need to find a better way to install an Auto Pro Comp guage setup. I will credit anyone who provides any parts on the article writeup.

01-15-2008, 07:07 AM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Need bezel and instrument housing. i have something for you i think let me look in the disaster known as my basement If i do have a bezel its for a non air conditioned truck. __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-15-2008, 05:07 PM	#3
Kixwy2 Registered User Join Date: Dec 2007 Location: Central Coast, CA Posts: 177	Re: Need bezel and instrument housing. I've got one out of a 74 that is cracked off where the radio was - do you just need the gauge area or the whole dash? __________________ 1974 GMC C-10; my new addiction 1998 4 Runner; daily driver

01-15-2008, 07:29 PM	#4
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Need bezel and instrument housing. I just need the guage area. As long the housing can be fitted to the bezel it will work. I can't remember, does the bezel screw into the housing?

01-15-2008, 07:49 PM	#5
Kixwy2 Registered User Join Date: Dec 2007 Location: Central Coast, CA Posts: 177	Re: Need bezel and instrument housing. Don't think so... the 74 has screw clips that mount on the metal dash and the bezel screws into those. 4 at the top, 2 each side, and 4 around the base of the steering wheel mount... Mine looks like this, except the radio section is missing. __________________ 1974 GMC C-10; my new addiction 1998 4 Runner; daily driver

01-16-2008, 01:38 AM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: Need bezel and instrument housing. The top of the bezel screws to the housing, the rest screw to the metal part of the dash. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 01-16-2008 at 01:42 AM.

01-16-2008, 03:50 PM	#8
Kixwy2 Registered User Join Date: Dec 2007 Location: Central Coast, CA Posts: 177	Re: Need bezel and instrument housing. It's all yours! I can't imagine shipping is any more than $15 going USPS. PM me your address and I can take it to the post office tomorrow. __________________ 1974 GMC C-10; my new addiction 1998 4 Runner; daily driver

01-22-2008, 09:34 AM	#9
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Need bezel and instrument housing. i wont part with any of my covers but it looks like you got that covered.. i have a instrument guage setup if you still need it.. i want to keep the speedo , fuel guage, temp guage, clock and ammeter if you only need it for the backing part you cna have the oil pressure one as it appears broken.. ill get a guess at shipping if you wanna send me your addy Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! Last edited by old Rusty C10; 01-22-2008 at 10:06 AM. Reason: added photos

01-23-2008, 04:47 PM	#10
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Need bezel and instrument housing. Keep what you want. I'll take the housing. PM sent with address. Thanks!! That's one big FLASH!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.