Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
10-19-2002, 07:54 PM | #1 |
Registered User
Join Date: Aug 2002
Location: Trenton ,Texas
Posts: 328
|
sm465 flywheel cover plate needed
hey guys , i have a 86 3/4 4x4 with a sm 465 trans. i need the flywheel cover plate. i do LOTS of mudding and i think im getting crud in my clutch. anyone?
|
10-20-2002, 12:17 AM | #2 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
i have both pieces required for this, but are from cast iron bellhousing truck, so i dunno if will work or not. are older sheetmetal ones
Last edited by Fast68Chevy; 10-22-2002 at 11:07 PM. |
10-20-2002, 09:56 AM | #3 |
Registered User
Join Date: Aug 2002
Location: Trenton ,Texas
Posts: 328
|
i have an aluminum housing. i have a sheetmetal one , but it will not bolt up ( guess its from an older style ). thanks..rat
|
10-22-2002, 10:04 PM | #4 |
Registered User
Join Date: Aug 2002
Location: Trenton ,Texas
Posts: 328
|
anyone? i need one really bad.........
|
10-22-2002, 11:33 PM | #5 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
does it look like th350 one ? one piece deal ? i have a black plastic 81 or so up one that the front part that goes in betwen plate and oil pan is one piece with the pan part under plate area, unlike older ones like 67-72 that are two piece parts that bolt together
|
Bookmarks |
|
|