She's ready for the new bullet- Here's a few pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

QWYKTRUK · 02-09-2008, 12:26 PM

Well the new bullet is FINALLY together and ready for the dyno on Monday. Here are a few pics for you fellow motor heads. I'll post the dyno numbers when finished with the tuning. We are anticipating 1050-1100 horsepower and 840-880 ft.lbs. torque. Thats running 118 octane race gas and 22 lbs of boost

First , the lonely engine bay

New all aluminum 427 cu.in. SBC !
1.almost ready

2. other side

3 READY for the DYNO

4.Had to change to fuel lines to -8- I'll replumb with new black fittings when I get it home

I've got pictures of the motor being built if anyone is interested in whats inside.

QWYKTRUK

David Flores · 02-09-2008, 12:28 PM

protrash64 · 02-09-2008, 12:32 PM

Right on!!!! I got the early sneak pics of this thing........looks better on here. Good thing you live close to the 202......it would make a nice break in run!!!

Jeff

Dinos63 · 02-09-2008, 01:12 PM

Quote:

Originally Posted by protrash64

Right on!!!! I got the early sneak pics of this thing........looks better on here. Good thing you live close to the 202......it would make a nice break in run!!!

Jeff

pt64 this truck is local?

BigDaddyDave · 02-09-2008, 12:53 PM

I have a very good wife and a not so good daughter, that i will trade. How much boot you want? haha Very nice project!

04Xrider · 02-09-2008, 01:04 PM

WOW! Man I would love to be there when you fire that puppy off.

Dinos63 · 02-09-2008, 01:07 PM

thats no bullet ...thats a cannon! very bad a--,

QWYKTRUK · 02-09-2008, 11:12 PM

Quote:

Originally Posted by Dinos63

thats no bullet ...thats a cannon! very bad a--,

Thanks. Coming from a guy with some BAD AZZ rides himself, I appreciate the compliment.

Thank you everyone for the kudos.
GREG64 - I will post dyno results. Working on getting internals posted...Quick rundown though- Callies Magnum XL 4in crank, Childs& Albert Alum Deep Cycle rods(6") custom made pistons, dual swap cam,lots of coatings on the heads, pistons, bearings,wrist pins,manifold,and some good shaft rockers.Custom oil pan and oil pump/pick up. 18 point stripped hardened rotors- TBS 8/71

62 short step- I can't wait either!! It is being tested in Mass. so I won't be there for the initial start up- Once it is in the truck, I'll do a burnout video and post it.

olsofti - No bank owned here. Got Me A Sugar Momma!! Just kidding!! No wife and kids are gone...plus I've been at this for 35 years. The silver paint is 2000 Audi Silvermist.It was also used on VW's.

Little Red 66 - I'll take BIGDADDYDAVE's offer over the chickens any day!!

suzq044- You've got it right girl, only with a little more added. "dont u mean "sit down, shut up, hold on" and don't get my seat wet!!

283 Man · 02-09-2008, 11:42 PM

that will be worth waiting to see burn out vid.I wonder if your going to have a wheele bar on back?? might need one

.. love the truck too good job

..

QWYKTRUK · 02-09-2008, 11:10 PM

Quote:

Originally Posted by BigDaddyDave

I have a very good wife and a not so good daughter, that i will trade. How much boot you want? haha Very nice project!

LOL !! That is the best offer I've gotten! I think I'll keep the truck. I don't need any help spendin' money!

olsofti · 02-09-2008, 01:48 PM

That's gonna be a helluva ride!
What is the silver paint color?

By the way do you own a bank or what?

greg64 · 02-09-2008, 02:18 PM

That's one hell of a motor!

Love the Brodix block. Let's see what you've got for a rotating assembly. Also, please post the dyno sheet when you break her in!

kdrodworks316 · 02-09-2008, 02:32 PM

oh my mighty mouse! nothing like a sbc with a huffer on top! no replacment for displacment

suzq044 · 02-09-2008, 03:29 PM

holy ish.. you're making me jealous

hewlett2002000 · 02-09-2008, 03:40 PM

lookin great man!!! ive always liked that truck!!!
John

*LILRED66* · 02-09-2008, 04:03 PM

Very impressive, indeed! I have a whole herd of egg-laying chickens, I'll trade you for that thing...

283 Man · 02-09-2008, 04:53 PM

that motor gives new meaning to "get in sat down and shut up and ride"

sweet

suzq044 · 02-09-2008, 10:43 PM

Quote:

Originally Posted by 283 Man

that motor gives new meaning to "get in sat down and shut up and ride"

sweet

dont u mean "sit down, shut up, hold on" .. lol

62 short step · 02-09-2008, 09:33 PM

Thats awesome!! Man I would love to hear that thing fire up!!!

*LILRED66* · 02-09-2008, 11:52 PM

QWYKTRUK:

I hope the start-up/trial run go well. Traded my herd of egg-laying chickens last night, to BIGDADDYDAVE, for his offer, so we won't be able to work out a deal for your masterpiece.

Dinos63 · 02-10-2008, 02:49 AM

LET ME KNOW WHEN YOU TAKE IT OUT TO THE PAVILLIONS,I WOULD LOVE TO SEE THE WHOLE TRUCK,VERY NICE

QWYKTRUK · 02-12-2008, 04:15 AM

Quote:

Originally Posted by Dinos63

LET ME KNOW WHEN YOU TAKE IT OUT TO THE PAVILLIONS,I WOULD LOVE TO SEE THE WHOLE TRUCK,VERY NICE

No problem Dino. It will be a while. I still have to get the motor here and in,then plumb it up with another radiator and coolant pump for the intercooler. I'll drop you a line when it's in . I'm in Chandler and you can drop by. I'm always open to new ideas for mods.

John

Dinos63 · 02-12-2008, 02:04 PM

Quote:

Originally Posted by QWYKTRUK

No problem Dino. It will be a while. I still have to get the motor here and in,then plumb it up with another radiator and coolant pump for the intercooler. I'll drop you a line when it's in . I'm in Chandler and you can drop by. I'm always open to new ideas for mods.

John

if you need any help, i am good labor

kyle4381 · 02-12-2008, 04:00 PM

That motor turned out really sweet. I like the intercooler. It makes my 177 seem small. I cannot wait to hear it run.

QWYKTRUK · 02-15-2008, 08:54 PM

Quote:

Originally Posted by Dinos63

if you need any help, i am good labor

I'll be in touch soon!! More for ideas than your labor, but ya' never know!

02-09-2008, 12:26 PM	#1
QWYKTRUK Registered User Join Date: Apr 2007 Location: AZ. Posts: 205	She's ready for the new bullet- Here's a few pics Well the new bullet is FINALLY together and ready for the dyno on Monday. Here are a few pics for you fellow motor heads. I'll post the dyno numbers when finished with the tuning. We are anticipating 1050-1100 horsepower and 840-880 ft.lbs. torque. Thats running 118 octane race gas and 22 lbs of boost First , the lonely engine bay New all aluminum 427 cu.in. SBC ! 1.almost ready 2. other side 3 READY for the DYNO 4.Had to change to fuel lines to -8- I'll replumb with new black fittings when I get it home I've got pictures of the motor being built if anyone is interested in whats inside. QWYKTRUK Last edited by QWYKTRUK; 02-09-2008 at 12:32 PM. Reason: added pic

02-09-2008, 12:28 PM	#2
David Flores Registered User Join Date: May 2007 Location: Temple Texas Posts: 399	Re: She's ready for the new bullet- Here's a few pics __________________ 66 c10 swbfs My Build.

02-09-2008, 12:32 PM	#3
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: She's ready for the new bullet- Here's a few pics Right on!!!! I got the early sneak pics of this thing........looks better on here. Good thing you live close to the 202......it would make a nice break in run!!! Jeff __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-09-2008, 12:53 PM	#5
BigDaddyDave RIP BigDaddyDave ~7-23-09~ You will be missed~ Join Date: Aug 2007 Location: Concord NC Posts: 1,361	Re: She's ready for the new bullet- Here's a few pics I have a very good wife and a not so good daughter, that i will trade. How much boot you want? haha Very nice project! __________________ BigDaddyDave's Truck: http://www.flickr.com/photos/daves71chevy/ \| See it in Action!

02-09-2008, 01:04 PM	#6
04Xrider Registered thread killer Join Date: Nov 2006 Location: Cookson, OK. Posts: 349	Re: She's ready for the new bullet- Here's a few pics WOW! Man I would love to be there when you fire that puppy off. __________________ !966 stepside, 350 SB, ZZ-4 roller, Crane roller rockers, 0.030 flat tops, airgap intake, 750 Holley, stainless steel headers, edelbrock SDT mufflers, Mark 8 elec fan, 700R-4, column shift

02-09-2008, 01:07 PM	#7
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: She's ready for the new bullet- Here's a few pics thats no bullet ...thats a cannon! very bad a--, __________________ CHEVY ONLY... Nothin Else !

02-09-2008, 11:42 PM	#9
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: She's ready for the new bullet- Here's a few pics that will be worth waiting to see burn out vid.I wonder if your going to have a wheele bar on back?? might need one.. love the truck too good job..

02-09-2008, 01:48 PM	#11
olsofti Registered User Join Date: Dec 2007 Location: Cypress Inn.Tn Posts: 135	Re: She's ready for the new bullet- Here's a few pics That's gonna be a helluva ride! What is the silver paint color? By the way do you own a bank or what?

02-09-2008, 02:18 PM	#12
greg64 Registered User Join Date: Dec 2007 Location: Kimberley, BC, Canada Posts: 799	Re: She's ready for the new bullet- Here's a few pics That's one hell of a motor! Love the Brodix block. Let's see what you've got for a rotating assembly. Also, please post the dyno sheet when you break her in! __________________ Greg 64 GMC Suburban - 283, NV3500, 14 bolt 77 C10 swb - 292, SM465, 12 bolt

02-09-2008, 02:32 PM	#13
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: She's ready for the new bullet- Here's a few pics oh my mighty mouse! nothing like a sbc with a huffer on top! no replacment for displacment

02-09-2008, 03:29 PM	#14
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: She's ready for the new bullet- Here's a few pics holy ish.. you're making me jealous __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn

02-09-2008, 03:40 PM	#15
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: She's ready for the new bullet- Here's a few pics lookin great man!!! ive always liked that truck!!! John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

02-09-2008, 04:03 PM	#16
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: She's ready for the new bullet- Here's a few pics Very impressive, indeed! I have a whole herd of egg-laying chickens, I'll trade you for that thing...

02-09-2008, 04:53 PM	#17
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: She's ready for the new bullet- Here's a few pics that motor gives new meaning to "get in sat down and shut up and ride" sweet Last edited by 283 Man; 02-09-2008 at 04:55 PM.

02-09-2008, 09:33 PM	#19
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: She's ready for the new bullet- Here's a few pics Thats awesome!! Man I would love to hear that thing fire up!!!



Register or Log In To remove these advertisements.

02-09-2008, 11:52 PM	#20
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: She's ready for the new bullet- Here's a few pics QWYKTRUK: I hope the start-up/trial run go well. Traded my herd of egg-laying chickens last night, to BIGDADDYDAVE, for his offer, so we won't be able to work out a deal for your masterpiece.

02-10-2008, 02:49 AM	#21
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: She's ready for the new bullet- Here's a few pics LET ME KNOW WHEN YOU TAKE IT OUT TO THE PAVILLIONS,I WOULD LOVE TO SEE THE WHOLE TRUCK,VERY NICE __________________ CHEVY ONLY... Nothin Else !

02-12-2008, 04:00 PM	#24
kyle4381 Senior Member Join Date: Nov 2005 Location: AZ Posts: 416	Re: She's ready for the new bullet- Here's a few pics That motor turned out really sweet. I like the intercooler. It makes my 177 seem small. I cannot wait to hear it run. Last edited by kyle4381; 02-12-2008 at 04:00 PM.

Register or Log In To remove these advertisements.