Air Ride - Compressor and Tank Location Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trebeck · 02-15-2008, 01:30 AM

Could I get some pics/ideas on where some of you may be mounting your air ride components: solenoid block, tank, compressor.

Thanks in advance!

72BlckButy · 02-15-2008, 04:21 AM

I've seen them mounted in the following locations:

- installed in the back underneath the bed (spare tire area)

- along the frame just behind the cab

- in the cab (tank and compressor)

- in the bed

- under the hood (compressor)

It's an open slate... I recently saw a truck that had the tank towards the rear (spare tire area), along with the compressor, and had the valves mounted just behind the cab on the passenger's side. There was a truck at a car show 2 years ago that had everything mounted on the outside of the frame rails.

Check out this thread...

Good luck with the decision!

shifty · 02-15-2008, 06:19 AM

http://67-72chevytrucks.com/vboard/s...54&postcount=5

http://67-72chevytrucks.com/vboard/s...58&postcount=6

http://67-72chevytrucks.com/vboard/s...9&postcount=11

http://67-72chevytrucks.com/vboard/s...&postcount=420

trebeck · 02-15-2008, 06:29 AM

Good stuff, thanks shifty. I believe I'll go the same route as rokcrln, both bolted to the right or left frame rail. Solenoid and ECU may go behind the seat (not sure yet). My fuel tank will be mounted in the rear of the truck, so that eliminates that setup...although the post by n2trux is pretty sweet.

Just a note, I'll be using Air Rides RidePro e2 kit (one 3gal tank).

**N2TRUX** · 02-15-2008, 10:28 PM

I suggest you get the compressor as far away from the cab as possible. No matter what brand you use, those suckers are LOUD!

trebeck · 02-16-2008, 12:44 AM

That answers my next question, thanks

02-15-2008, 01:30 AM	#1
trebeck Registered User Join Date: Jan 2008 Location: Charlotte, NC Posts: 50	Air Ride - Compressor and Tank Location Help Could I get some pics/ideas on where some of you may be mounting your air ride components: solenoid block, tank, compressor. Thanks in advance!

02-15-2008, 04:21 AM	#2
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Air Ride - Compressor and Tank Location Help I've seen them mounted in the following locations: - installed in the back underneath the bed (spare tire area) - along the frame just behind the cab - in the cab (tank and compressor) - in the bed - under the hood (compressor) It's an open slate... I recently saw a truck that had the tank towards the rear (spare tire area), along with the compressor, and had the valves mounted just behind the cab on the passenger's side. There was a truck at a car show 2 years ago that had everything mounted on the outside of the frame rails. Check out this thread... Good luck with the decision! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 02-15-2008 at 04:30 AM.

02-15-2008, 06:19 AM	#3
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Air Ride - Compressor and Tank Location Help http://67-72chevytrucks.com/vboard/s...54&postcount=5 http://67-72chevytrucks.com/vboard/s...58&postcount=6 http://67-72chevytrucks.com/vboard/s...9&postcount=11 http://67-72chevytrucks.com/vboard/s...&postcount=420 __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

02-15-2008, 06:29 AM	#4
trebeck Registered User Join Date: Jan 2008 Location: Charlotte, NC Posts: 50	Re: Air Ride - Compressor and Tank Location Help Good stuff, thanks shifty. I believe I'll go the same route as rokcrln, both bolted to the right or left frame rail. Solenoid and ECU may go behind the seat (not sure yet). My fuel tank will be mounted in the rear of the truck, so that eliminates that setup...although the post by n2trux is pretty sweet. Just a note, I'll be using Air Rides RidePro e2 kit (one 3gal tank).

02-15-2008, 10:28 PM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Air Ride - Compressor and Tank Location Help I suggest you get the compressor as far away from the cab as possible. No matter what brand you use, those suckers are LOUD! __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-16-2008, 12:44 AM	#6
trebeck Registered User Join Date: Jan 2008 Location: Charlotte, NC Posts: 50	Re: Air Ride - Compressor and Tank Location Help That answers my next question, thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.