55-59 4x4s lets see um! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bad421 · 03-09-2008, 09:11 PM

Who out there has 55-59 4x4s? If you do post um up, need some ideas for my build.

zack66 · 03-11-2008, 08:49 PM

Check this truck out on ebay. Not mine but I just saw it.
http://cgi.ebay.com/ebaymotors/GMC-1...spagenameZWDVW

extd56 · 03-13-2008, 07:57 AM

Here are a few of my 57 CHevy Napco truck.

stellarmishap · 03-13-2008, 08:49 AM

Here is ours, '57 on '71 blazer chassis.

bad421 · 03-22-2008, 06:35 AM

awsome trucks, mine is a 59 3200 on a 73 frame with 3/4 ton axles with 4.56s and spool in front locker in the rear. Going to do a 350/ th350/ np205 combo in it soon.

1-ton of fun · 04-10-2008, 05:36 PM

stumbled across this one today on hotrodders.com
http://www.hotrodders.com/gallery/sh...hp/photo/30181

**57NAPCO** · 04-15-2008, 02:04 AM

my original 57 NAPCO

Norselander · 04-19-2008, 08:26 PM

my was-original 58 NAPCO

Here are some of the cool mods that have already been performed:

KaleCo Auto budget lowering kit
McLeod Performance front-end weight reduction kit
Forward frame-horns / winch removed for steeper approach angles
High-offset, non-interference rear 'singles'
Custom A/C
Ford Aerostar passenger seat with custom grey/black upholstery
McLeod Performance easy-press, low-resistance brake pedal kit

Most of these mods were pretty easy to perform. Don't hesitate to ask if you need help with any of them.

**MJN** · 04-22-2008, 04:37 AM

Heres my '56 Napco. Old county plow truck in its day, which explains the roof lights and the huge v-plow that came with it. It runs and drives but I'd really like to find a set of lockouts for it someday.

03-09-2008, 09:11 PM	#1
bad421 Registered User Join Date: Jan 2007 Location: Virginia Posts: 411	55-59 4x4s lets see um! Who out there has 55-59 4x4s? If you do post um up, need some ideas for my build. __________________ ASE MASTER TECH 1968 K10 LT1 350,SM420,T-221 lwb fleetSold 2007 Ford Ranger DD 2000 Ford F250SD V10 4x4 1968 Pontiac Firebird 468/TH400 current project 1991 Dodge W350 SRW CUMMINS POWERED Whole lotta fuel and a whole lotta Smoke

03-11-2008, 08:49 PM	#2
zack66 Registered User Join Date: Jan 2008 Location: Los Angeles, CA Posts: 39	Re: 55-59 4x4s lets see um! Check this truck out on ebay. Not mine but I just saw it. http://cgi.ebay.com/ebaymotors/GMC-1...spagenameZWDVW __________________ 1956 GMC 1959 Skyliner and more than a couple of Mustang

03-13-2008, 07:57 AM	#3
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: 55-59 4x4s lets see um! Here are a few of my 57 CHevy Napco truck. Attached Images

03-13-2008, 08:49 AM	#4
stellarmishap Registered User Join Date: Sep 2007 Location: Tyler, Texas! Posts: 28	Re: 55-59 4x4s lets see um! Here is ours, '57 on '71 blazer chassis. Attached Images __________________ 71 1/2 ton GMC Suburban 57 Chevy Step on 71 Blazer 4X4 Chassis 350/700R4 05 Chevy Duramax 2500HD Silverado 4X4 CC 71 Corvette 402/ nitrous 67 camaro RS 454 68 elcamino 468/th400 ss clone

03-22-2008, 06:35 AM	#5
bad421 Registered User Join Date: Jan 2007 Location: Virginia Posts: 411	Re: 55-59 4x4s lets see um! awsome trucks, mine is a 59 3200 on a 73 frame with 3/4 ton axles with 4.56s and spool in front locker in the rear. Going to do a 350/ th350/ np205 combo in it soon. __________________ ASE MASTER TECH 1968 K10 LT1 350,SM420,T-221 lwb fleetSold 2007 Ford Ranger DD 2000 Ford F250SD V10 4x4 1968 Pontiac Firebird 468/TH400 current project 1991 Dodge W350 SRW CUMMINS POWERED Whole lotta fuel and a whole lotta Smoke

04-10-2008, 05:36 PM	#6
1-ton of fun polishing a turd Join Date: Dec 2004 Location: houston, tx Posts: 674	Re: 55-59 4x4s lets see um! stumbled across this one today on hotrodders.com http://www.hotrodders.com/gallery/sh...hp/photo/30181 __________________ 59 chevy apache 31 4x4 - my project: http://67-72chevytrucks.com/vboard/s....php?p=8668512 53 buick special - straight 8 sled - blow through turbo 47 gmc - flatbed hot rod build 99 ford econoline e350 - 4x4 converted family roadtrip/overlanding rig AKA 'Monstervan' AKA 'Daddy-Van'

04-15-2008, 02:04 AM	#7
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,234	Re: 55-59 4x4s lets see um! my original 57 NAPCO

04-19-2008, 08:26 PM	#8
Norselander Clunker Farm, Proprietor Join Date: Oct 2003 Location: Coastal Northern California Posts: 124	Re: 55-59 4x4s lets see um! my was-original 58 NAPCO Here are some of the cool mods that have already been performed: KaleCo Auto budget lowering kit McLeod Performance front-end weight reduction kit Forward frame-horns / winch removed for steeper approach angles High-offset, non-interference rear 'singles' Custom A/C Ford Aerostar passenger seat with custom grey/black upholstery McLeod Performance easy-press, low-resistance brake pedal kit Most of these mods were pretty easy to perform. Don't hesitate to ask if you need help with any of them. __________________ Drew Chief Junk Jockey Last edited by Norselander; 04-19-2008 at 08:33 PM.

04-22-2008, 04:37 AM	#9
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Re: 55-59 4x4s lets see um! Heres my '56 Napco. Old county plow truck in its day, which explains the roof lights and the huge v-plow that came with it. It runs and drives but I'd really like to find a set of lockouts for it someday. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com Last edited by MJN; 04-22-2008 at 04:38 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.