where to get rear suspesion parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rizick · 05-30-2008, 03:16 AM

my 66 chevy c-10 is need of the rear control arms and probably the springs and related parts as well. I just bought a 2 1/2" drop spindle & disc kit from matt's classic bowties for the front. I was planing to go with drums on the rear and was looking things over and decided the rust through spots on the control arms needed attention, and maybe deal with the rear drop at the same time but I am not sure of what all I need to do and buy. any help would be appreciated.

kdrodworks316 · 05-30-2008, 03:43 AM

www.classicparts.com

Rogue 64 · 05-30-2008, 04:15 AM

Someone makes/sells tubular trailing arms.

joe231 · 05-30-2008, 04:28 AM

Quote:

Originally Posted by Rogue 64

Someone makes/sells tubular trailing arms.

you can get them from classic parts

suicide 63 · 05-30-2008, 04:43 AM

here ya go to steep for me
http://www.classicperform.com/Store/...k/6372TRSK.htm

**scotts62** · 05-30-2008, 04:48 AM

Quote:

Originally Posted by suicide 63

here ya go to steep for me
http://www.classicperform.com/Store/...k/6372TRSK.htm

Here airride technologies, that is a sweet rear setup!, and they are pround of them, i would be too!

rizick · 05-30-2008, 04:55 AM

thanks for the help. the classic performance people have some cool stuff but out of my budget.

joe231 · 05-30-2008, 04:51 AM

linky

joe231 · 05-30-2008, 05:05 AM

how about these
linky 2

TimE · 05-30-2008, 06:19 AM

Rizik, if they are rusted out I woould definitely replace them. If I am not mistaken, the rear control arms are the same from 63-72. Guys have used ones for sale off and on in the parts section of the board. Shipping would be the largest problem you would run into there. If you were closer, I have an extra set I could hook you up with.

joe231 · 05-30-2008, 06:27 AM

and.....from what i hear, they are the same for long and short wheelbase. shouldn't be too hard to find a good used set

**Chevy Fleetside** · 05-30-2008, 03:52 PM

Tubular for $599... http://www.truckandcarshop.com/trucks60_72/t60_111.html I dont know how good they are though, but truckandcarshop usually has decent stuff. At least everything I have even gotten from them has been good.. And if you look down at the rest of the page they even have drop springs..

05-30-2008, 03:16 AM	#1
rizick Registered User Join Date: May 2008 Location: williamsville, illinois Posts: 12	where to get rear suspesion parts my 66 chevy c-10 is need of the rear control arms and probably the springs and related parts as well. I just bought a 2 1/2" drop spindle & disc kit from matt's classic bowties for the front. I was planing to go with drums on the rear and was looking things over and decided the rust through spots on the control arms needed attention, and maybe deal with the rear drop at the same time but I am not sure of what all I need to do and buy. any help would be appreciated.

05-30-2008, 03:43 AM	#2
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: where to get rear suspesion parts www.classicparts.com

05-30-2008, 04:15 AM	#3
Rogue 64 Ol' Blue Viking Join Date: Nov 2006 Location: north of Baton Rouge Posts: 172	Re: where to get rear suspesion parts Someone makes/sells tubular trailing arms. __________________ Driving Paw-paws truck into the Sunset!

05-30-2008, 04:43 AM	#5
suicide 63 Registered User Join Date: Nov 2007 Location: peculiar mo Posts: 219	Re: where to get rear suspesion parts here ya go to steep for me http://www.classicperform.com/Store/...k/6372TRSK.htm

05-30-2008, 04:55 AM	#7
rizick Registered User Join Date: May 2008 Location: williamsville, illinois Posts: 12	Re: where to get rear suspesion parts thanks for the help. the classic performance people have some cool stuff but out of my budget.

05-30-2008, 04:51 AM	#8
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: where to get rear suspesion parts linky __________________ *CHEVY ONLY*

05-30-2008, 05:05 AM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: where to get rear suspesion parts how about these linky 2 __________________ *CHEVY ONLY*

05-30-2008, 06:19 AM	#10
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: where to get rear suspesion parts Rizik, if they are rusted out I woould definitely replace them. If I am not mistaken, the rear control arms are the same from 63-72. Guys have used ones for sale off and on in the parts section of the board. Shipping would be the largest problem you would run into there. If you were closer, I have an extra set I could hook you up with.

05-30-2008, 06:27 AM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: where to get rear suspesion parts and.....from what i hear, they are the same for long and short wheelbase. shouldn't be too hard to find a good used set __________________ *CHEVY ONLY*

05-30-2008, 03:52 PM	#12
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: where to get rear suspesion parts Tubular for $599... http://www.truckandcarshop.com/trucks60_72/t60_111.html I dont know how good they are though, but truckandcarshop usually has decent stuff. At least everything I have even gotten from them has been good.. And if you look down at the rest of the page they even have drop springs.. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 Last edited by Chevy Fleetside; 05-30-2008 at 04:00 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.