|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
06-07-2008, 10:02 PM
|
#1 |
|
Registered User
Join Date: Aug 2006
Location: Wheat Ridge, Colo.
Posts: 300
|
Need to borrow a "plastic small block" in Colo.
I am putting a 283 in my '53 3100. Does anyone have one of those plastic
small blocks to use for a mock up to set up my tubular engine cross member? I would pay rent, leave a deposit and pick it up and return it. I live in NW Denver. x10thaircav@yahoo.com |
|
|
|
06-08-2008, 12:57 AM
|
#2 |
|
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: Need to borrow a "plastic small block" in Colo.
or how about just using a bare block?
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 06-08-2008 at 12:58 AM. |
|
|
|
|
06-08-2008, 01:28 AM
|
#3 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: Need to borrow a "plastic small block" in Colo.
Those do make it easier but one of my buddies just uses a gutted block with a pan and heads on it with a gutted trans. All out of the junk pile. True he has to use the hoist to move it around but hanging a small block in that pickup isn't that hard. Your big problem is going to be clearance between the left exhaust manifold and the stock steering box if you run it.
I run a cast iron V8 pickup bellhousing that fastens to the rear mounts on my 48 with the 250 6 but I don't know if you would have enough head and dist clearance with the V8. |
|
|
|
|
06-17-2008, 06:49 PM
|
#4 |
|
Registered User
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
|
Re: Need to borrow a "plastic small block" in Colo.
Good question!! Where are those plastic blocks avaliable at. Would make my mocking up 100x easier
__________________
Long live SLIM ------------------ At least try to buy American 
|
|
|
|
|
06-17-2008, 09:30 PM
|
#5 |
|
Registered User
Join Date: Oct 2007
Location: pittston,PA
Posts: 1,184
|
Re: Need to borrow a "plastic small block" in Colo.
speedway motors sell them s/b chevy long block is $299.99 pt# is 910-97100
the ad says they weigh less than 30 lbs. the web site is www.speedwaymotors.com their phone # is 1-800-979-0122
__________________
There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter) |
|
|
|
|
06-18-2008, 03:32 AM
|
#6 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: Need to borrow a "plastic small block" in Colo.
For that price I can hang one of the bare blocks I have from my chain hoist or my cherry picker a lot of times.
I'll admit that there have been times when I was horsing a cast iron block around to fit things up that one of the plastic ones would have been nice and If I was fitting engine mounts on a daily or a few times a week it would make sense. Not worth it for one build though. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
