Trans swap is 68 suburban

[mag-d]

I have a 68 suburban C-10, factory 3 speed manual trans. I want to replace the 3 speed manual with a 350 turbo trans.

Does anybody know rather I need a short or long tail trans for the replacement, also do I need to replace the yoak on the drive shaft or will the factory original shaft work.

Your help is apreciated.

[JimKshortstep4x4]

A short tail 350 will swap in and can use the existing driveshaft as is.

Jim

[mag-d]

So is the splines on the 3 speed and the auto trans the same, and i can use the drive shaft as is

[JimKshortstep4x4]

Yes, the splines are the same.

Jim

[GMCPaul]

JimKshortstep4x4 called it right the only thing you need to change is the transmission, trans. linkage & transmission crossmember.
We carry a new style automatic trans crossmember here if interested
http://www.gmcpauls.com/auto.transmission.htm
for $70.00
GMCPaul

[Longhorn Man]

and a rad with a cooler, linkages and linkage mounts, a column or an aftermarket shifter

[mag-d]

Ya I forgot about the trans cooler, Im figuring on a Ididit colum, don't want a floor shifter. I was looking at a trans crossmember from classic performance.
I don't know If i will change radiators or run a external cooler.

[BlueJeep]

Do an external cooler, they're much better at cooling the tranny than one in the radiator.