Front door windows - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orbot · 09-21-2008, 03:06 PM

Hey guys, so i changed my doors cause of the rust and i see that the channels of the windows where the rollers of the regulator roll are rusty, how can i take the window apart from that channel

ont_guy_38 · 09-21-2008, 04:36 PM

usually a block of wood and a rubber mallet will get those off but do it gently

orbot · 09-21-2008, 04:48 PM

Ill give it a try. have spair windows laying around here.

Thanks for the tip

09-21-2008, 03:06 PM	#1
orbot Registered User Join Date: Jan 2008 Location: Chula Vista, Ca Posts: 518	Front door windows Hey guys, so i changed my doors cause of the rust and i see that the channels of the windows where the rollers of the regulator roll are rusty, how can i take the window apart from that channel Attached Images

09-21-2008, 04:36 PM	#2
ont_guy_38 Registered User Join Date: Jul 2007 Location: Ontario Canada Posts: 1,006	Re: Front door windows usually a block of wood and a rubber mallet will get those off but do it gently

09-21-2008, 04:48 PM	#3
orbot Registered User Join Date: Jan 2008 Location: Chula Vista, Ca Posts: 518	Re: Front door windows Ill give it a try. have spair windows laying around here. Thanks for the tip



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.