WTB: tailgate seal components - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nightmare** · 09-25-2008, 02:37 PM

Hi everyone. I'm looking for the brackets and seal that goes on the back of a 1st gen Blazer. See the pics. Please post if you have any, and what the price is please. Thanks

bryanschevyparts · 09-25-2008, 10:49 PM

i have one for the top of the tailgate .

**bigdon-70blazer** · 09-26-2008, 08:25 AM

This has been an interest and need of mine recently. I got 2 sets of the vertical pieces from members but out of the 4 parts I got, 3 had small rust holes in them after media blasting, so I too am looking for just one more completely intact vertical part or I may just have to paint it and live with the pin holes I have. Also, I got the weatherstrip part like you see in BobbyK from Car an Truck shop in Orange California. They were great to deal with. I will sent you the address when I find it. bigdon

**bigdon-70blazer** · 09-26-2008, 08:31 AM

http://www.truckandcarshop.com/trucks60_72/t60_057.html
try this

**nightmare** · 09-26-2008, 08:38 AM

Quote:

Originally Posted by bryanschevyparts

i have one for the top of the tailgate .

Thanks anyway, but I'm only looking for the ones in the picture.

Quote:

Originally Posted by bigdon-70blazer

This has been an interest and need of mine recently. I got 2 sets of the vertical pieces from members but out of the 4 parts I got, 3 had small rust holes in them after media blasting, so I too am looking for just one more completely intact vertical part or I may just have to paint it and live with the pin holes I have. Also, I got the weatherstrip part like you see in BobbyK from Car an Truck shop in Orange California. They were great to deal with. I will sent you the address when I find it. bigdon

Thanks bigdon, that'll work. The pics are from something that bobbyk posted a couple of weeks ago. I didn't know that he was actually selling the weatherstrip though. You don't see these a lot, and any of the junkyards I've been to don't have blazers at all; mostly trucks. Maybe if there was a good enough market, we can possibly get the vertical parts reproduced. Just a thought though.

**bigdon-70blazer** · 09-26-2008, 08:49 AM

He was not actually selling the weather strip or the parts, he was responding to my question in an earlier post and sent me pics of what he did. Good luck, maybe I will get lucky also!

**nightmare** · 09-26-2008, 08:58 AM

Quote:

Originally Posted by bigdon-70blazer

He was not actually selling the weather strip or the parts, he was responding to my question in an earlier post and sent me pics of what he did. Good luck, maybe I will get lucky also!

Ah, ok. Makes sense. You too.

FRENCHBLUE72 · 09-26-2008, 09:58 AM

I have the 2 side strips that have been rechromed and the rear hold down piece but it needs some work. Also are the rear hold downs different from the front?

**nightmare** · 09-26-2008, 10:06 AM

Quote:

Originally Posted by FRENCHBLUE72

I have the 2 side strips that have been rechromed and the rear hold down piece but it needs some work. Also are the rear hold downs different from the front?

Do you have any pics of them? As for the rear hold down, what type of work does it need? I'm not sure about the difference between the front and rear pieces. How much are you asking for them? Shipped?

FRENCHBLUE72 · 09-26-2008, 06:48 PM

ill get some pics posted tonight..

FRENCHBLUE72 · 09-27-2008, 10:28 AM

Heres some pics of the strips. I have 2 of the side strips rechromed and I only have one of the long strips left but the pic does show 2. The long strip needs work on the bottom side but the top is still pretty nice.. If you need and more pics let me know and ill dig em out of storage..

**nightmare** · 10-05-2008, 10:59 AM

FRENCHBLUE72, can you get some pics of the bottom of the floor strips? I was able to get the side pieces (thanks harry) but still need that one. Please let me know.

Mike

FRENCHBLUE72 · 10-05-2008, 11:16 AM

Here ya go... pics are in this thread here>>>http://67-72chevytrucks.com/vboard/s...=308737&page=2

starts at #34 let me know if you would like any other pics.

**nightmare** · 10-06-2008, 11:35 AM

Thanks anyway FRENCHBLUE72, but that's a bit more work than what I can handle at this moment.

Are there any others that have the bottom piece?

09-25-2008, 10:49 PM	#2
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: WTB: tailgate seal components i have one for the top of the tailgate .

09-26-2008, 08:31 AM	#4
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: WTB: tailgate seal components http://www.truckandcarshop.com/trucks60_72/t60_057.html try this

09-26-2008, 08:49 AM	#6
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: WTB: tailgate seal components He was not actually selling the weather strip or the parts, he was responding to my question in an earlier post and sent me pics of what he did. Good luck, maybe I will get lucky also!

09-26-2008, 09:58 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: WTB: tailgate seal components I have the 2 side strips that have been rechromed and the rear hold down piece but it needs some work. Also are the rear hold downs different from the front? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-26-2008, 06:48 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: WTB: tailgate seal components ill get some pics posted tonight.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-26-2008, 08:25 AM	#3
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: WTB: tailgate seal components This has been an interest and need of mine recently. I got 2 sets of the vertical pieces from members but out of the 4 parts I got, 3 had small rust holes in them after media blasting, so I too am looking for just one more completely intact vertical part or I may just have to paint it and live with the pin holes I have. Also, I got the weatherstrip part like you see in BobbyK from Car an Truck shop in Orange California. They were great to deal with. I will sent you the address when I find it. bigdon

09-27-2008, 10:28 AM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: WTB: tailgate seal components Heres some pics of the strips. I have 2 of the side strips rechromed and I only have one of the long strips left but the pic does show 2. The long strip needs work on the bottom side but the top is still pretty nice.. If you need and more pics let me know and ill dig em out of storage.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-05-2008, 11:16 AM	#13
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: WTB: tailgate seal components Here ya go... pics are in this thread here>>>http://67-72chevytrucks.com/vboard/s...=308737&page=2 starts at #34 let me know if you would like any other pics. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.