The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-29-2008, 01:01 PM   #1
hewlett2002000
Registered User
 
hewlett2002000's Avatar
 
Join Date: Dec 2006
Location: Cleveland, Tx
Posts: 1,619
question about engine kit and heads???

Im getting ready to build my 350 for my 66 and i have a few questions. im caught between rebuild kits and need an opinion.


one comes with... $415.08

HP350KH with Hypereutectic Pistons 350 Chevy Performance kit. We have sold these components for many years. All top quality brand name components at terrific prices!

INCLUDES
# Hasting or Sealed Power Moly Rings
# Federal Mogul flattop HYPEREUTECTIC Pistons
# Clevite Rod Brgs
# Clevite Main Brgs
# Clevite Cam Brgs
# Melling or Sealed Power Hi volume Oil Pump
# Crane Energizer Camshaft and Lifter Kit
# Cloyes TRUE Roller Timing Components
# Pioneer Frost Plugs
# Felpro Gaskets




the other comes with... $561.33

HP350KHW with Hypereutectic Pistons and Scatt crank, 350 Chevy Performance kit. We have sold these components for many years. All top quality brand name components at terrific prices!

Hastings or Seal Power Moly Rings
Federal Mogul flattop Hypereutectic Pistons
Clevite Rod Brgs
Clevite Main Brgs
Clevite Cam Brgs
Melling Hi Volume Oil Pump
Crane Energizer Cam and Lifter Kit
Cloyes True Roller Timing Components
Pioneer Steel Block Plugs
Felpro Gaskets
Scat Crankshaft (New)
Scat forged I-beam rods pressed pin #35700P (extra $159.99)




eaither way im getting this cam...

#100032 1200-4200 RPM 260/260 Adv Dur, 204/204 Dur @ .50 .427/.427 Lift 110 Lobe Separation



would there be a big performance difference between these two kits? also i have a set of heads from a early 90's chevy tbi 350 that are rebuilt. i dont think these heads would work well with eaither setup. can anyone recommend a good set of heads at a reasonable price?
thanks,
John
__________________
Respect:
1. A feeling of appreciative, often deferential regard; esteem.
2. The state of being regarded with honor or esteem.
3. Willingness to show consideration or appreciation.

When you fail to show consideration to others values you are showing disrespect.
hewlett2002000 is offline   Reply With Quote
Old 09-29-2008, 03:20 PM   #2
TimE
Hey Y'all!!
 
TimE's Avatar
 
Join Date: Dec 2007
Location: Bay Minette, Alabama
Posts: 1,755
Re: question about engine kit and heads???

The only difference I see in the kits is the second one comes with a crank. There would be no performance difference between the two kits. The decideing factor between the kits, imo, would be if your engine needs to have the crank turned. Weigh the cost of the machine shop charge to turn your existing crank versus the cost of the new crank. That looks like a kit from Northern Auto Parts. If it is, I would suggest upgrading to the brass freeze plugs and see what the upgrade charge would be to get a different brand cam. It just depends on what you are looking for performance wise but, IMHO, that cam is really small.

As far as the heads, if $$ is a factor (as it always seems to be in my case), just run the heads you have for now and you can upgrade when you have the extra cash. Value wise, the GM Vortec heads are probably your best buy but, IIRC, you have to have a matching intake which drives the cost up a little.

Good luck!
TimE is offline   Reply With Quote
Old 09-29-2008, 04:49 PM   #3
hewlett2002000
Registered User
 
hewlett2002000's Avatar
 
Join Date: Dec 2006
Location: Cleveland, Tx
Posts: 1,619
Re: question about engine kit and heads???

well i think im gonna wait on the engine build till after i get the other parts of my truck in order. im gonna rebuild the front end, front brakes, calipers, and rotors. get gauges and get them installed in the dash. find some tires for a good price. and you wont believe this but my friend found some complete, brand new under dash ac/heater setups for $400 a piece. i cant pass that up. after i get the truck suspension , brakes, and interior together, ill just save my money for a few weeks to a month and build my engine the way i want (better heads, the rebuild kit i want, and a good intake and carb). so if if money allows ill have my truck on the road in about two months. the reason im on the ball now is ive been riding in my friends 66 and it makes me REALLY want my truck on the road.
thanks,
John
__________________
Respect:
1. A feeling of appreciative, often deferential regard; esteem.
2. The state of being regarded with honor or esteem.
3. Willingness to show consideration or appreciation.

When you fail to show consideration to others values you are showing disrespect.
hewlett2002000 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com