SWB 4x4 Frame - Checking Interest - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vtblazer · 10-16-2008, 05:55 AM

Pulled a swb 4x4 bare frame out of the parts yard yesterday, is this a saleable item or should we scrap it?

Tough to sell anything big up here.

*FormerMember* · 10-16-2008, 07:03 AM

Heh, I may be interested... I have enough parts to build one.

jc · 10-16-2008, 07:07 AM

if i had 6 of those i could sell em all within a month down here. but for how much i dont know

**special-K** · 10-16-2008, 07:36 AM

They are sought after.and worth decent change.I bet you could find someone close enough to buy it.

*FormerMember* · 10-16-2008, 07:58 AM

Quote:

Originally Posted by special-K

I bet you could find someone close enough to buy it.

<---

**CPNE** · 10-16-2008, 09:39 AM

If it were a LWB 3/4 ton frame I'd buy it, them shorty 1/2 ton 4x4's do nuthin for me.

Grendel can have it.

As long as he makes a GMC out iof it

*FormerMember* · 10-16-2008, 09:54 AM

Quote:

Originally Posted by CPNE

If it were a LWB 3/4 ton frame I'd buy it, them shorty 1/2 ton 4x4's do nuthin for me.

Grendel can have it.

As long as he makes a GMC out iof it

Heh, I think I have enough parts left over to do either one.

I have this Vortec 454 and 4WD 700R4 kicking around...

Cabs and beds as well.

vtblazer · 10-16-2008, 10:42 AM

Quote:

Originally Posted by CPNE

If it were a LWB 3/4 ton frame I'd buy it, them shorty 1/2 ton 4x4's do nuthin for me.

Not a 67-72 lwb frame but there is a later model frame sitting here as well.

So what's a 4x4 swb frame worth?

I could add pics and roll this over to a for sale thread...

*FormerMember* · 10-16-2008, 10:53 AM

Quote:

Originally Posted by vtblazer

Not a 67-72 lwb frame but there is a later model frame sitting here as well.

So what's a 4x4 swb frame worth?

I could add pics and roll this over to a for sale thread...

No clue. I'll take a look at it on Saturday

Mudder · 10-16-2008, 04:29 PM

I've been looking for one too but dang. Where is Vermont?

And what kind of condition is it?

vtblazer · 10-16-2008, 04:50 PM

Quote:

Originally Posted by Mudder

I've been looking for one too but dang. Where is Vermont?

...right here.

Frame is very solid but missing one rear spring hanger.

msgross · 10-16-2008, 04:57 PM

8 cents a pound in my town...

I know that sdailey bought one off of Uncle in GA.

$300-$400 if decent

sdailey · 10-16-2008, 08:57 PM

Quote:

Originally Posted by msgross

I know that sdailey bought one off of Uncle in GA.

$300-$400 if decent

I got mine for $400 from a "retired" truck builder (not Uncle) here in GA. The frame was almost perfect except for a couple of stress cracks coming off the rear spring hanger rivets and that was an easy fix.

I agree with the $300-$400 figure.

72swbcamo · 10-16-2008, 09:12 PM

I bought one about 18 months ago. I paid $700.00 but it was all cleaned up and freshly painted. It also came with a vin plate. i though the price was fair.

**bigdon-70blazer** · 10-16-2008, 09:34 PM

I just saw a LWB 4 X 4 GMC in the salvage yard, so maybe some interest in it?
Sorry but did not mean to hijack... bigdon-70blazer

**bigdon-70blazer** · 10-16-2008, 09:36 PM

8 lug wheels....I remember that

*FormerMember* · 10-17-2008, 08:57 AM

Quote:

Originally Posted by 72swbcamo

I bought one about 18 months ago. I paid $700.00 but it was all cleaned up and freshly painted. It also came with a vin plate. i though the price was fair.

That was an awesome deal for that. Gary had more into it with just sweat equity.

msgross · 10-16-2008, 09:54 PM

Quote:

Originally Posted by sdailey

I got mine for $400 from a "retired" truck builder (not Uncle) here in GA. The frame was almost perfect except for a couple of stress cracks coming off the rear spring hanger rivets and that was an easy fix.

I agree with the $300-$400 figure.

my bad... I thought Uncle supplied all parts in the Atlanta area

sdailey · 10-17-2008, 08:48 AM

Quote:

Originally Posted by msgross

my bad... I thought Uncle supplied all parts in the Atlanta area

He did supply my disc brake axles.

jc · 10-16-2008, 05:17 PM

ill give this a shot.
id say $500-$750 with all pearches (body & spring perches)
in solid no rot condition
and with all cross members

and if it was a rolling chassi maybe add a few hundred more.

anybody think im off?
am i in the ball park?

comon guys i ve seen the 4wd section of this sight. i know kurt has helped alot of people here.
what do you guys think its worth.

BTW kurt at 4:30 pm i had a local guy (freind of mine) call me to keep an eye out for one of these for him.

**D.PASSMORE** · 10-16-2008, 05:50 PM

without a correct title? that one is hard to figure, what would you put into body and possible return, if you had to sell it. Wow! CPNE still around....

vtblazer · 10-16-2008, 06:30 PM

Quote:

Originally Posted by jc

ill give this a shot.
id say $500-$750 with all pearches (body & spring perches)
in solid no rot condition
and with all cross members

and if it was a rolling chassi maybe add a few hundred more.

anybody think im off?
am i in the ball park?

comon guys i ve seen the 4wd section of this sight. i know kurt has helped alot of people here.
what do you guys think its worth.

BTW kurt at 4:30 pm i had a local guy (freind of mine) call me to keep an eye out for one of these for him.

Quote:

Originally Posted by D.PASSMORE

without a correct title? that one is hard to figure, what would you put into body and possible return, if you had to sell it. Wow! CPNE still around....

Thanks jc for your input.

PASSMORE, title typically goes with the cab...yes?

Mudder · 10-16-2008, 07:08 PM

Here you wouldn't need the title but only a bill of sale or reciept. I would say with cross members, hangers and in decent shape around 3-400 bucks.

**D.PASSMORE** · 10-16-2008, 09:56 PM

On 4x4 frames, the VIN number is usually stamped in the frame (front left rail) that corresponds with the data plate (cab) and glove box sticker. I seen a nice reconditioned “72” SWB 4x4 go for “cheap’” because it had a 2wd title (C model instead of a K model VIN number). That’s in Florida, not sure about salvage titles, there not to common down here, as everything from the 80’s and before is a pile of rust. But, if you are going to make a driver out of it, about $500.00 for a rolling frame with rebuild able axles.

10-16-2008, 05:55 AM	#1
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	SWB 4x4 Frame - Checking Interest Pulled a swb 4x4 bare frame out of the parts yard yesterday, is this a saleable item or should we scrap it? Tough to sell anything big up here.

10-16-2008, 07:03 AM	#2
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: SWB 4x4 Frame - Checking Interest Heh, I may be interested... I have enough parts to build one.

10-16-2008, 07:07 AM	#3
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: SWB 4x4 Frame - Checking Interest if i had 6 of those i could sell em all within a month down here. but for how much i dont know __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

10-16-2008, 07:36 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: SWB 4x4 Frame - Checking Interest They are sought after.and worth decent change.I bet you could find someone close enough to buy it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-16-2008, 09:39 AM	#6
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: SWB 4x4 Frame - Checking Interest If it were a LWB 3/4 ton frame I'd buy it, them shorty 1/2 ton 4x4's do nuthin for me. Grendel can have it. As long as he makes a GMC out iof it __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-16-2008, 04:29 PM	#10
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: SWB 4x4 Frame - Checking Interest I've been looking for one too but dang. Where is Vermont? And what kind of condition is it?

10-16-2008, 04:57 PM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: SWB 4x4 Frame - Checking Interest 8 cents a pound in my town... I know that sdailey bought one off of Uncle in GA. $300-$400 if decent __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 10-16-2008 at 06:06 PM.

10-16-2008, 09:12 PM	#14
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: SWB 4x4 Frame - Checking Interest I bought one about 18 months ago. I paid $700.00 but it was all cleaned up and freshly painted. It also came with a vin plate. i though the price was fair.

10-16-2008, 09:34 PM	#15
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: SWB 4x4 Frame - Checking Interest I just saw a LWB 4 X 4 GMC in the salvage yard, so maybe some interest in it? Sorry but did not mean to hijack... bigdon-70blazer

10-16-2008, 09:36 PM	#16
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: SWB 4x4 Frame - Checking Interest 8 lug wheels....I remember that

10-16-2008, 05:17 PM	#20
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: SWB 4x4 Frame - Checking Interest ill give this a shot. id say $500-$750 with all pearches (body & spring perches) in solid no rot condition and with all cross members and if it was a rolling chassi maybe add a few hundred more. anybody think im off? am i in the ball park? comon guys i ve seen the 4wd section of this sight. i know kurt has helped alot of people here. what do you guys think its worth. BTW kurt at 4:30 pm i had a local guy (freind of mine) call me to keep an eye out for one of these for him. __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

10-16-2008, 05:50 PM	#21
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Re: SWB 4x4 Frame - Checking Interest without a correct title? that one is hard to figure, what would you put into body and possible return, if you had to sell it. Wow! CPNE still around.... __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 10-16-2008 at 05:52 PM.

10-16-2008, 07:08 PM	#23
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: SWB 4x4 Frame - Checking Interest Here you wouldn't need the title but only a bill of sale or reciept. I would say with cross members, hangers and in decent shape around 3-400 bucks.

10-16-2008, 09:56 PM	#24
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Re: SWB 4x4 Frame - Checking Interest On 4x4 frames, the VIN number is usually stamped in the frame (front left rail) that corresponds with the data plate (cab) and glove box sticker. I seen a nice reconditioned “72” SWB 4x4 go for “cheap’” because it had a 2wd title (C model instead of a K model VIN number). That’s in Florida, not sure about salvage titles, there not to common down here, as everything from the 80’s and before is a pile of rust. But, if you are going to make a driver out of it, about $500.00 for a rolling frame with rebuild able axles. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.