mix and match - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drummin89 · 10-16-2008, 10:09 AM

Im planning on converting to power brakes and mounting it on the firewall, but am unsure how to go about this. I bought a pedal assembly, booster and master cylinder out of a mid 80's suburban from a junkyard for about $20, with the plan that I would modify the pedal assembly to work on my 52 Chevy 3/4 ton pickup. Im now thinking for ease of installation and looks that I will go with a premade/fabed setup from CPP (or any other if anyone has suggestions!). Here is the thing, since I already have a booster and master cylinder, is it possible that I could just buy the pedal assembly from CPP and mount the booster and master cylinder from the suburban to it? Or what other booser will mount up to the CPP pedal assembly that the suburban master cylinder will bolt to. The booster and master cylinder seemto be new and to have been recently put on the truck before it went to the junkyard so Id like to use what I already have.

The reason for the switch/want to use the CPP assembly is because I still have the stock mechanical clutch & pedal and a throttle cable type gas pedal in place of the stock one, and the suburban pedal assembly would put the brake pedal right on the clutch pedal, and would need a bit of modifications to make it so its in the stock location.

http://www.classicperform.com/Store/...s/4753FBBD.htm

here is the tread I started about using a 80's suburban pedal assembly
http://67-72chevytrucks.com/vboard/s...pedal+assembly

I may try calling CPP but I wanted to see if anyone had an idea or a way to go about this.

Thanks!

dwcsr · 10-16-2008, 04:24 PM

they do sell it seperately but calling them is best.

entourageguy · 10-16-2008, 06:16 PM

I'd check on the dia. of the booster as well. Think the kits use a smaller dia one.

drummin89 · 10-16-2008, 08:49 PM

the diameter of the booster in the kits is 8in.

Im also going to check on something at the junkyard this weekend. I already got something off of this truck that matches up perfectly with the 52 dash. I wont tell what until I know if it will work but unfortunately I must say its from a..a..a...f....o....r...d

10-16-2008, 10:09 AM	#1
drummin89 Registered User Join Date: Jul 2007 Location: Wapwallopen Pa Posts: 412	mix and match Im planning on converting to power brakes and mounting it on the firewall, but am unsure how to go about this. I bought a pedal assembly, booster and master cylinder out of a mid 80's suburban from a junkyard for about $20, with the plan that I would modify the pedal assembly to work on my 52 Chevy 3/4 ton pickup. Im now thinking for ease of installation and looks that I will go with a premade/fabed setup from CPP (or any other if anyone has suggestions!). Here is the thing, since I already have a booster and master cylinder, is it possible that I could just buy the pedal assembly from CPP and mount the booster and master cylinder from the suburban to it? Or what other booser will mount up to the CPP pedal assembly that the suburban master cylinder will bolt to. The booster and master cylinder seemto be new and to have been recently put on the truck before it went to the junkyard so Id like to use what I already have. The reason for the switch/want to use the CPP assembly is because I still have the stock mechanical clutch & pedal and a throttle cable type gas pedal in place of the stock one, and the suburban pedal assembly would put the brake pedal right on the clutch pedal, and would need a bit of modifications to make it so its in the stock location. http://www.classicperform.com/Store/...s/4753FBBD.htm here is the tread I started about using a 80's suburban pedal assembly http://67-72chevytrucks.com/vboard/s...pedal+assembly I may try calling CPP but I wanted to see if anyone had an idea or a way to go about this. Thanks! __________________ Chris 52 Chevy 3600 (3/4 ton) 5 window pickup -54 235 Inline 6 w/ Fuel Injection Conversion -Clifford 2/4bbl Aluminum Intake and Headers -1/2 ton front axle swap w/ 5lug disc brake kit -CPP Power Steering Kit Various pictures of my 52 Chevy 3600 Last edited by drummin89; 10-16-2008 at 10:17 AM.

10-16-2008, 04:24 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: mix and match they do sell it seperately but calling them is best.

10-16-2008, 06:16 PM	#3
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: mix and match I'd check on the dia. of the booster as well. Think the kits use a smaller dia one. __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited

10-16-2008, 08:49 PM	#4
drummin89 Registered User Join Date: Jul 2007 Location: Wapwallopen Pa Posts: 412	Re: mix and match the diameter of the booster in the kits is 8in. Im also going to check on something at the junkyard this weekend. I already got something off of this truck that matches up perfectly with the 52 dash. I wont tell what until I know if it will work but unfortunately I must say its from a..a..a...f....o....r...d __________________ Chris 52 Chevy 3600 (3/4 ton) 5 window pickup -54 235 Inline 6 w/ Fuel Injection Conversion -Clifford 2/4bbl Aluminum Intake and Headers -1/2 ton front axle swap w/ 5lug disc brake kit -CPP Power Steering Kit Various pictures of my 52 Chevy 3600



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.