The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-27-2008, 11:46 PM   #1
robertspangler
Registered User
 
Join Date: Oct 2008
Location: Archbold Ohio
Posts: 42
New to the forums and i had a question about a truck i just bought!

Well first of all I would like to say hello, Im Robert from Ohio and I just purchased my first 73-87 chevy truck, I bought a 1978 chevy k10 stepside shortbed 4x4. Well my question is this, In it right now there is a 3 speed manual transmission, it had 3 on the colum but the p/o moved it from the column to the floor. I know this transmission is the least liked that they put in to this truck, plus i would rather have a 4 speed manual or an automatic transmission, so if i were to get like a th350 or somthign similar would it just bolt up to the transfer case and all of the drive shafts still work or would i have to get different shafts, also if anybody woudl recoment a better tranny it would be appreciated.
robertspangler is offline   Reply With Quote
Old 10-27-2008, 11:52 PM   #2
joe231
Registered User
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
Re: New to the forums and i had a question about a truck i just bought!

__________________
CHEVY ONLY

Last edited by joe231; 10-27-2008 at 11:52 PM.
joe231 is offline   Reply With Quote
Old 10-28-2008, 02:50 AM   #3
Hoods69BadBowTie
Chevys Kick A$$
 
Hoods69BadBowTie's Avatar
 
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
Re: New to the forums and i had a question about a truck i just bought!

Um so you want to put in a sm465 the (4) speeed manual or an automatic TH350 or TH400. The automatics you will just need a Torque Convertor and the tranny and the lines to run it with like kick down and the cooler lines up to the rad. The manual you will just need a new pressure plate and I would do clutch at the same time. What kind of motor and T-Case do you have? Your drive shafts should bolt up to the T-Case you should n't have to change them around.
__________________
*HOODS is what I answer too*
-'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold
-'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit
-'86 K5 Blazer Silverado 6.2 4" lift 35"s
-'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's
-'83 Monte Carlo T-Tops. 126,500 Original Miles
-LATER
I would rather push a Chevy then drive a ford!!
Hoods69BadBowTie is offline   Reply With Quote
Old 10-28-2008, 11:52 AM   #4
robertspangler
Registered User
 
Join Date: Oct 2008
Location: Archbold Ohio
Posts: 42
Re: New to the forums and i had a question about a truck i just bought!

it has a 350 and the guy says its a 203 transfer case but unless it was modified its not a 203 because it has lockouts on the front.
robertspangler is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:46 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com