|
|
|
12-02-2002, 09:12 PM
|
#1 |
|
Workaholic
Join Date: Oct 2002
Location: Katy, TX
Posts: 1,589
|
Strange miss
I can't work on my truck until tomorrow but I thought I'd get some ideas from you all before I start. Installed an Edelbrock manifold & 1406 a few months ago and truck has run fine until a couple days ago. At idle, in park, there may be a slight hint of a miss but I am not certain. Revved up in park or neutral there is no miss. Drop it in gear and there is a noticeable miss. At highway speeds or under acceleration I do not notice a miss. Lastly, after driving it a few miles it will diesel when I kill it--this started the same day as the miss. So, what do you think? Plugs, Plug wires, vacuum, timing, combo of these or something else. Thanks.
Rob
__________________
1979 K-10 Silverado (work in progress) 1991 V1500 Subruban 1999 Suburban LT 4x4 2006 Suburban LTZ (daily driver) |
|
|
|
12-02-2002, 10:41 PM
|
#2 |
|
My other Love
Join Date: Aug 2001
Location: Castlegar B.C. Canada
Posts: 4,085
|
bad module in the distributor. Or not enough power getting to the coil or the coil could be crapping out on you
__________________
 Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life |
|
|
|
|
12-02-2002, 11:03 PM
|
#3 |
|
Workaholic
Join Date: Oct 2002
Location: Katy, TX
Posts: 1,589
|
Anyway to test the coil/module other than replacing them?
__________________
1979 K-10 Silverado (work in progress) 1991 V1500 Subruban 1999 Suburban LT 4x4 2006 Suburban LTZ (daily driver) |
|
|
|
|
12-02-2002, 11:48 PM
|
#4 |
|
Account Suspended
Join Date: Oct 2002
Location: Olathe, KS
Posts: 2,300
|
Make sure you do not have a vacuum leak. Double check the #8 runner vacuum port.... Everything you have described would lead to a leak.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
